The structural and phase state of the samples obtained by co-grinding of Ti and Cu powders under different conditions (with graphite, in petroleum ether, and in xylene) is investigated. It is demonstrated that after thermal treatment of powders obtained by milling of titanium, copper, and graphite in petroleum ether, both cubic titanium carbide and hexagonal titanium carbohydride are formed, whereas by milling without graphite, only hexagonal carbohydride possessing high thermal stability is formed. CuTi and CuTi2 intermetallic phases are formed under all examined conditions of mechanosynthesis.
Similar content being viewed by others
References
S. S. Kiparisov, Yu. V. Levinskii, and A. P. Petrov, Titanium Carbide: Synthesis, Properties, and Application [in Russian], Metallurgiya, Moscow (1987).
T. Suzuki and M. Nagumo, Scr. Metall. Mater., 27, 1413–1418 (1992).
T. Suzuki and M. Nagumo, Scr. Metall. Mater., 32, No. 8, 1215–1220 (1995).
K. Tokumitsu, Mater. Sci. Forum, 88–90, 715–722 (1992).
M. Nagumo, T. Suzuki, and K. Tsuchida, Mater. Sci. Forum, 225–227, 581–586 (1996).
A. I. Efimov, L. P. Belorukova, I. V. Vasil’kova, and V. P. Chechev, Properties of Inorganic Phases: A Handbook [in Russian], Khimiya, Leningrad (1983).
N. Zarrinfar, P. H. Shipway, A. R. Kennedy, and A. Saidi, Scripta Mater., 46, 121–126 (2002).
M. R. Akbarpour and F. A. Hesari, Mater. Res. Express, No. 3, 045004 (2016).
M. Sherif El-Eskandarany, Metall. Mater. Trans. A, 27, 2374–2382 (1996).
G. Rosas, N. Vargas, C. Patino-Carachure, et al., Revista Mexicana de Fízika, 55, No. 1, 114–117 (2009).
L. V. Zueva and A. I. Gusev, Fiz. Tverd. Tela, 41, No. 7, 1134–1141 (1999).
G. Tomé, B. Trindade, and M. T. Vieira, Vacuum. 64, 205–210 (2002).
S. F. Lomaeva, I. V. Povstugar, V. A. Volkov, et al., Khim. Inter. Ust. Razv., 17, 629–639 (2009).
H. J. Goldschmidt, Interstitial Alloys, Vols. 1–2 [Russian translation], Mir, Moscow (1971).
I. Khidirov, ed., Neutron diffraction study of hydrogen thermoemission phenomenon from powder crystals, ISBN: 978-953-51-0307-3, InTech (2012) [Electronic resource]: http://www.intechopen.com/books/neutrondiffraction/neutron-diffraction-study-of-hydrogen-thermoemissionphenome-non-from-powder-crystals.
P. Yu. Butyagin, I. V. Berestetskaya, I. V. Kolbanev, and I. K. Pavlychev, Zh. Fiz. Khim., LX, No. 3, 579–584 (1986).
C. Muthazhagan, A. Gnanavelbabu, G. B. Bhaskar, and K. I. Rajkumar, Adv. Mater. Res., 845, 398–402 (2014).
S. F. Lomaeva, Fiz. Met. Metalloved., 104, No. 4, 403–422 (2007).
H. Goretzki, H. Bittner, and H. Nowotny, Monatsh. Chem. Verw. Teile Anderer Wiss., 95, No. 6, 1521–1526 (1964).
M. Makovec and Z. Ban, J. Less-Common Metals, 21, 169–180 (1970).
G. Renaudin, K. Yvon, S. K. Dolukhanyan, et al., J. Alloys Compd., 356–357, 120–127 (2003).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 12, pp. 92–99, December, 2017.
Rights and permissions
About this article
Cite this article
Eremina, M.A., Lomaeva, S.F., Burnyshev, I.N. et al. Mechanosynthesis of Precursors for TiC–Cu Cermets. Russ Phys J 60, 2155–2163 (2018). https://doi.org/10.1007/s11182-018-1340-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-018-1340-7