Skip to main content
SpringerLink
Log in

Comparative Analysis of the Properties of ZrO2–SiO2 and ZrO2–Al2O3–SiO2 Composition Fiber Composite Materials

  • Published:
Refractories and Industrial Ceramics Aims and scope

Strength, morphology, and phase composition are analyzed for a ceramic composite system based on fibers of tetragonal ZrO2 and a matrix with different content of SiO2 and Al2O3. It is shown that with an Al2O3 content from 0 to 20 wt.% there is formation of a precipitation-hardened structure and an increase in material ultimate strength in bending. The reduction in strength with a further increase in Al2O3 content is due to a deficiency in SiO2 binder and inadequate Al2O3 and mullite particle sintering with each other. Features of the structure and phase composition are demonstrated for a composite based on ZrO2 fibers with a different Al2O3:SiO2 ratio in the matrix.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.

Similar content being viewed by others

References

  1. E. N. Kablov, “Innovative development FGUP VIAM GNTs RF “Strategic areas of development of materials and technology for their development in the period up to 2030,” Aviats. Mater. Technol, No. 1(34) (2015), 3 – 33. DOI: https://doi.org/10.18577/2071-9140-2015-0-1-3-33.

  2. E. N. Kablov, “Russian needs of new generation materials,” Redkie Zemli, No. 3, 813 (2014).

  3. D. V. Grashchenkov and L. V. Chursova, “Strategy of developing composite and functional materials,” Aviats. Mater. Technol, No. S, 231 – 242 (20012).

  4. E. N. Kablov, D. V. Grashchenkov, N. V. Isaeva, et al., “High-temperature structural composite materials based on glass and ceramic for prospective aviation technology objects,” Steklo Keram., No. 4, 7 – 11 (2012).

  5. E. N. Kablov, D. V. Grashchenkov,, N. V. Isaeva, et al., “Prospective high-temperature composite ceramic materials,” Ross. Khim. Zh., LIV(1), 20 – 24 (2010).

    Google Scholar 

  6. E. N. Kablov, O. G. Ospennikova, and B. S. Lomberg, “Strategic areas for developing structural materials and their processing technology for aero engines of the present and future,” Avtomat Svarka, No. 10, 23 – 32 (2013).

  7. N. M. Varrik, Yu. A. Ivakhnenko, and V. G. Maksimov, “Oxide-oxide composite materials for gas turbine engines (review),” Trudy VIAM: Elektron,. Nauch. Tekhn. Zh., No. 8, Art. 03 (2014). DOI: https://doi.org/10.18577/2307-6046-2014-0- 3-3.

  8. Yu. A. Ivakhnenko, V. G. Babashov, A.M. Zimichev, and E. V. Tinyakova, “High-temperature heat insulation and heat protection materials based on refractory compound fibers,” Aviats. Mater. Technol, No. S, 380 – 386 (2012).

  9. Proceeding of the 15th Annual Conference on Composites and Advanced Ceramic Materials. Part 2 of 2: Ceramic Engineering and Science Proceeding, 12(9/10) (2009).

  10. Ceramics and Composite materials, Proc. VII All-Russia Sci. Conf, Syktyvkar (2010).

  11. US Patent 2608525. Catalytic cracking of hydrocarbons with a silica-alumina-zirconia composite, Claim 01.11.46, Publ. 08.26.52.

  12. G. Aguila, F. Gracia, and P. Araya, “CuO and CeO2 catalysts supported on Al2O3, ZrO2 and SiO2 in the oxidation of CO at low temperature,” Applied Catalysis A-General, 343, 16 – 24 (2008). URL: http://repositorio.uchile.cl/bitstream/handle/2250/125036/AguilaGonzalo.pdf?sequence=1&isAllowed=y (access date 14.09.2017). DOI: https://doi.org/10.1016/j.apcata.2008.03.015

    Article  Google Scholar 

  13. W. Wang, K. Wu, P. Lui, et al., “Hydrodeoxygenation of p-cresol over Pt/Al2O3 catalyst promoted by ZrO2, CeO2 and CeO2. ZrO2,” Ind. Eng. Chem. Res., 55, 7598 – 7603 (2016) http://pubs.acs.org/doi/abs/10.1021/acs.iecr.6b00515.

  14. V. V. Kumar, G. Naresh, M. Sudhakar, et al., “An investigation on the influence of support type for Ni catalyzed vapour phase hydrogenation of aqueous levulinic acid to γ-valerolactone,” RSC Advanced, 6, 9872 – 9879 (2016)

    Article  CAS  Google Scholar 

  15. E. D. Banus, M. A. Ulla, E. E. Miro, and V. G. Milt, “Structured catalyst for soot combustion for diesel engines. Diesel engine — combustion, emissions and condition monitoring,” InTech.. 118 – 142 (2013). URL: http://cdn.intechopen.com/pdfs/44436/InTech-structuredcatalystsforsootcombustionfordieselengines.pdf (access date 04.09.2017). DOI: https://doi.org/10.5772/54516.

    Google Scholar 

  16. Yu. I. Golovin, D. G. Kuznetsov, V. M. Vasyukov, et al., “Composites based on zirconium oxide and their use for immobilization of radioactive waste,” Vestn. TGU, 18(6), 3150 (2013).

    Google Scholar 

  17. R. Gomez, T. Lopez, T. Tzompantzi, et al., “Zirconia/silica sol-gel catalysts: effect of surface heterogeneity on the selectivity 2-propanol decomposition,” Langmuir, 13, 970 – 973 (1997).

    Article  CAS  Google Scholar 

  18. Q. P. Wang, X. S. Tian, S. X. Liu, et al., “Phase transformation of Al2O3–SiO2–ZrO2 composite membranes,” Adv. Mater. Res., 177, 329 – 333 (2010). URL: https://www.scientific.net/AMR.177.329 (access date 08.25.2017). DOI: https://doi.org/10.4028/www.scientific.net/AMR.177.329.

  19. C. C. Barry and N. M. Grant, Ceramic Materials. Science and Engineering, Springer (2007).

    Google Scholar 

  20. R. Zhang, Y. Changshou, and W. Baoling, “Novel Al2O3–SiO2 aerogel / porous zirconia composite with ultra-low thermal conductivity,” J. Porous Mater, 1 – 8 (2017).

  21. R. Zhang, “Enhanced mechanical and thermal properties of anisotropic fibrous porous mullite-zirconia composites produced using sol-gel impregnation,” J. Alloys Compd., 699, 511 – 516 (2017). URL: http://www.sciencedirect.com/science/article/pii/S0925838817300099 (access date 04.09.2017). DOI: https://doi.org/10.1016/j.jallcom.2017.01.007.

    Article  CAS  Google Scholar 

  22. Abdul-Ghani Olabi “Characterisation of alumina-zirconia composites produced by micron-sized powders,” DCU, 115 (2005).

  23. P. Bosh and J.-C. Niepsce, “Ceramic materials. Processes, properties and applications,” ISTE, 573 (2007).

  24. R. E. Loehman, Characterization of Ceramics Momentum Press, N. Y. (2010).

    Google Scholar 

  25. S. W. Freiman and J. J. Mecholsky, The Fracture of Brittle Materials. Testing and Analysis, Wiley (2012).

Download references

Work was carried out within the scope of implementing comprehensive scientific area 14.3 “multifunctional heatproof and heat insulation materials” (1) within the scope of project No. 13-08-12110 ofi m with the Russian fund for fundamental research.

Author information

Authors and Affiliations

  1. FGUP All-Russia Institute of Aviation Materials GNTs RF, Moscow, Russia

    Yu. A. Balinova, N. V. Buchilin & V. G. Babashov

Authors
  1. Yu. A. Balinova
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. N. V. Buchilin
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. V. G. Babashov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yu. A. Balinova.

Additional information

Translated from Novye Ogneupory, No. 4, pp. 136 – 140, April, 2018.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Balinova, Y.A., Buchilin, N.V. & Babashov, V.G. Comparative Analysis of the Properties of ZrO2–SiO2 and ZrO2–Al2O3–SiO2 Composition Fiber Composite Materials. Refract Ind Ceram 59, 218–222 (2018). https://doi.org/10.1007/s11148-018-0209-1

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11148-018-0209-1

Keywords

Search

Navigation