The effect of a titanium nitride coating on stress structural inhomogeneity in oxide-carbide ceramic under action of a combined load is studied. A considerable effect of a coating on properties determining stress structural inhomogeneity within ceramic is revealed. A requirement is noted for considering stress structural inhomogeneity in designing objects from oxide-carbide ceramic with a coating.
Similar content being viewed by others
References
S. N. Grigor’ev, V. V. Kuzin, M. N. Morgan, et al., “Influence of thermal loads on the stress–strain state of aluminum-oxide ceramic cutting plates,” Russ. Eng. Res., 32, No. 5, 473 – 477 (2012).
V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Effect of a TiC coating on the stress-strain state of a plate of a high-density nitride ceramic under nonsteady thermoelastic conditions,” Refract. Indust. Ceram., 54(5), 376 – 380 (2014).
V. V. Kuzin, S. N. Grigor’ev, and V. N. Ermolin, “Stress inhomogeneity in a ceramic surface layer under action of an external load. Part 4. Combined effect of force and thermal loads,” Refract. Indust. Ceram., 55(1), 40 – 44 (2014).
S. N. Grigor’ev, V. V. Kuzin, and M. A. Volosova, “Stress-strain state of a coated nitride ceramic Tool,” Russ. Eng. Res., 32(7/8), 561 – 566 (2012).
V. V. Kuzin, “Thermal state of ceramic cutting tools in high-speed cutting,” Russ. Eng. Res., 24(9), 32 – 40 (2004).
S. N. Grigoriev and V. V. Kuzin, “Prospects for tools with ceramic cutting plates in modern metal working,” Glass and Ceramics, 68(7/8), 253 – 257 (2011).
V. V. Kuzin, “Effective use of high density ceramic for manufacture of cutting and working tools,” Refract. Indust. Ceram., 51(6), 421 – 426 (2010).
M. A. Volosova, S. N. Grigor’ev, and V. V. Kuzin, “Effect of titanium nitride coatings on stress structural inhomogeneity in oxide-carbide ceramic. Part 1. Research procedure,” Refract. Indust. Ceram., 55(4), 338 – 340 (2014).
V. V. Kuzin, “Microstructural model of ceramic cutting plate,” Russ. Eng. Res., 31(10), 479 – 483 (2011).
V. V. Kuzin and V. I. Myachenkov, “Stress–strain state of ceramic cutting plate,” Russ. Eng. Res., 31(10), 994 – 1000 (2011).
S. N. Grigor’ev, V. I. Myachenkov, and V. V. Kuzin, “Automated thermal-strength calculations of ceramic cutting plates,” Russ. Eng. Res., 31(11), 1060 – 1066 (2011).
V. Kuzin and S. Grigoriev, “Method of investigation of the stress-strain state of surface layer of machine elements from a sintered nonuniform material,” Appl. Mechan. Mater., 486, 32 – 35 (2014).
This applied scientific research was performed with financial support of the state in the name of the Russian Ministry of Education and Science (unique project identifier RFMEF157414X0003).
Author information
Authors and Affiliations
Corresponding author
Additional information
Parts 1 – 3 published in Novye Ogneupory Nos. 8, 10, and 12 (2014), and Part 4 in No. 2 (2015).
Translated from Novye Ogneupory, No. 4, pp. 49 – 53, April 2015.
Rights and permissions
About this article
Cite this article
Volosova, M.A., Grigor’ev, S.N. & Kuzin, V.V. Effect of Titanium Nitride Coating on Stress Structural Inhomogeneity in Oxide-Carbide Ceramic. Part 5. A Combined Load Operates1 . Refract Ind Ceram 56, 197–200 (2015). https://doi.org/10.1007/s11148-015-9812-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-015-9812-6