Advertisement

Refractories and Industrial Ceramics

, Volume 55, Issue 5, pp 487–491 | Cite as

Effect of Tinaium Nitride Coatings on Stress Structural Inhomogeneity in Oxide-Carbide Ceramic. Part 2. Concentrated Force Action1

  • M. A. Volosova
  • S. N. Grigor’ev
  • V. V. Kuzin
Article

The effect of a coating on stress structural inhomogeneity in an oxide-carbide ceramic under action of a concentrated force load is studied. A significant effect is revealed for a coating on properties governing stress structural inhomogeneity in ceramic. A requirement is noted for considering stress structural inhomogeneity in designing objects made from oxide-carbide ceramic with a coating.

Keywords

ceramic coating stress structural inhomogeneity concentrated force structural element 

Notes

This applied scientific research was performed with financial support of the state in the person of the Russian Ministry of Scientific Education (unique project identifier — RFMEF157614X0012).

References

  1. 1.
    S. N. Grigor’ev, V. V. Kuzin, et al., “Influence of loads on the stress-strain state of aluminum-oxide ceramic cutting plates,” Russian Engineering Research, 32(1), 61 – 67 (2012).CrossRefGoogle Scholar
  2. 2.
    V. V. Kuzin, S. N. Grigor’ev, and V. N. Ermolin, “Stress inhomogeneity in a ceramic surface layer under action of an external load. Part 1. Effect of complex mechanical loading,” Refract. Indust. Ceram., 54(5), 416 – 419 (2014).CrossRefGoogle Scholar
  3. 3.
    V. V. Kuzin, S. N. Grigor’ev, and V. N. Ermolin, “Stress inhomogeneity in a ceramic surface layer under action of an external load. Part 3. Effect of force load distribution,” Novye Ogneupory, No. 1, 42 – 45 (2014).Google Scholar
  4. 4.
    S. N. Grigor’ev, V. V. Kuzin, and M. A. Volosova, “Stress-strain state of a coated nitride ceramic tool,” Russian Engineering Research, 32(7/8), 561 – 566 (2012).CrossRefGoogle Scholar
  5. 5.
    M. A. Volosova, S. N. Grigor’ev, and V. V. Kuzin, “Effect of a titanium nitride coating on structural inhomogeneity in oxide-carbide ceramic. Part 1. Research procedure,” Novye Ogneupory, No. 8, 28 – 31 (2014).Google Scholar
  6. 6.
    V. V. Kuzin, “Microstructural model of ceramic cutting plate,” Russian Engineering Research, 31(5), 479 – 483 (2011).CrossRefGoogle Scholar
  7. 7.
    V. V. Kuzin and V. I. Myachenkov, “Stress-strain state of ceramic cutting plate,” Russian Engineering Research, 31(10), 994 – 1000 (2011).CrossRefGoogle Scholar
  8. 8.
    S. N. Grigor’ev, V. I. Myachenkov, and V. V. Kuzin, “Automated thermal-strength calculations of ceramic cutting plates,” Russian Engineering Research 31(11), 1060 – 1066 (2011).CrossRefGoogle Scholar
  9. 9.
    V. Kuzin and S. Grigoriev, “Method of investigation of the stress-strain state of surface layer of machine elements from a sintered nonuniform material,” Appl. Mechan. Mater., 486, 32 – 35 (2014).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 2015

Authors and Affiliations

  • M. A. Volosova
    • 1
  • S. N. Grigor’ev
    • 1
  • V. V. Kuzin
    • 1
  1. 1.FGBOU VPO Moscow State Technological University StankinMoscowRussia

Personalised recommendations