Advertisement

Refractories and Industrial Ceramics

, Volume 54, Issue 4, pp 299–303 | Cite as

Combustion during Firing Heat Insulation Ceramic Material based on Waste Fuel Shale

  • V. Z. Abdrakhimov
  • E. S. Abdrakhimova
Article

Combustion is studied for heat insulation material from production waste without using traditional materials. It is shown that during heat treatment of heat insulation materials in the range 400 – 600°C the main part of volatile substances is removed, in the range 1050 – 1100°C iron reduction accelerates significantly, and organic material is almost entirely absent from ceramic material fired at 1100°C.

Keywords

heat insulation material waste fuel shale ash and slag mixture intershale clay combustion pyrocarbon iron oxide hydrocarbons 

References

  1. 1.
    D. Yu. Denisov, I. V. Kovkov, V. Z. Abdrakhimov, and L. V. Zhuravl’, RF Patent 2362749, MPK C 04 B 14/24, Composition for producing porous filler. Claimant and patent holder Samara State University, Claim 12.03.07, Publ. 07.27.09, Byul. No. 21.Google Scholar
  2. 2.
    V. Z. Abdrakhimov, V. A. Kulikov, and I. V. Kovkov, “involvement of coal enrichment waste in the manufacture of refractory materials,” Koks. Khim, No. 11, 39–43 (2010).Google Scholar
  3. 3.
    V. Z. Abdrakhimov and D. Yu. Denisov, Theoretical and Technological Aspects of Using Technogenic Raw Material in Heat Insulation Material Manufacture [in Russian], Samara. Acad. State and Municipal management, Samara (2010).Google Scholar
  4. 4.
    E. S. Abdrakhimova and E. V. Vdovina, “Procedure for studying gas composition liberated during firing ceramic composite material based on baddeleyite clay and basalt charge combustion product,” Izv. Vyssh. Uchebn. Zaved, Stroitel’stvo, No. 9, 25–29 (2008).Google Scholar
  5. 5.
    E. S. Abdrakhimova and V. Z. Abdrakhimov, “Study of combustion during firing of heat insulation material from nonferrous metallurgy and powder generation technogenic raw material,” Zh. Prikl. Khim., 82(8), 1247–1252 (2012).Google Scholar
  6. 6.
    E. S. Abdrakhimova and V. Z. Abdrakhimov, “Study of heat and mass transfer processes during firing ceramic material from technogenic raw material,” Materialovedenie, No. 1, 18–20 (2008).Google Scholar
  7. 7.
    O. Yu. Esin and P. V. Gel’d, Physical Chemistry of Pyrometallurgical Processes. Part. 1. Reaction Between Gaseous and Solid Phase [in Russian], Metallurgiya, Sverdlovsk (1962).Google Scholar
  8. 8.
    V. Z. Abdrakhimov, Production of Ceramic Objects Based on Power generation and Nonferrous Metallurgy Waste [in Russian], East. Kazakh. State Techn. Univ. Ust’-Kamenogorsk (1997).Google Scholar
  9. 9.
    V. Z. Abdrakhimov and E. S. Abdrakhimova, Chemical Technology of Ceramic Brick Using Technogenic Raw Material: Textbook recommended for RF higher education in the construction field as a teaching aid for students learning in the area of 653500 “Construction.” [in Russian], SGASU, Samara (2007).Google Scholar
  10. 10.
    V. P. Petrov and B. A. Maksimov, Contemporary State and Future Development of Building Materials Science: Materials of Eight RASSN Academic Lectures [in Russian], CGASU, Samara (2004).Google Scholar
  11. 11.
    V. Z. Abdrakhimov, Study of Iron-Containing Traditional Natural and Technogenic Raw Material for Sintering Ceramic Materials. Effect of Fe 2+ and Fe 3+ Ions on Low-Temperature Mullite Formation [in Russian], Samara State Arch.-Building Univ., Samara (2009).Google Scholar
  12. 12.
    E. V. Vdovina, V. Z. Abdrakhimov, and E. S. Abdrakhimova, “Study of nuclear gamma-resonance spectroscopy of a dark core during firing baddeleyite readily melting clay,” Izv. Vyssh. Uchebn. Zaved, Stroitel’stvo, No. 5, 26–32 (2007).Google Scholar
  13. 13.
    E. V. Vdovina, E. S. Abdrakhimova, and V. Z. Abdrakhimov, “Determination of the black core during firing brick from baddeleyite clay and basalt charge combustion product,” Bashkir. Khim. Zh., 14(2), 102–104 (2007).Google Scholar
  14. 14.
    V. Z. Abdrakhimov and E. S. Abdrakhimova, “Formation of a black core with rapid firing of floor tiles,” Steklo Keram., No. 8, 30–32 (1999).Google Scholar
  15. 15.
    V. Z. Abdrakhimov and E. S. Abdrakhimova, “Formation of a black core with rapid firing of ceramic materials,” Stroit. Mater. Oborud. XXI Veka, No. 2, 64–65 (2006).Google Scholar
  16. 16.
    S. Zh. Saibulatov, S. T. Suleimenov, and A. V. Ralko, Ash Ceramic Wall Materials [in Russian], Nauka, Alma-Ata (1982).Google Scholar
  17. 17.
    S. T. Suleimenov, Physicochemical Processes of Structure Formation in Building Materials and Industrial Mineral Waste [in Russian], Monuskrip, Moscow (1996).Google Scholar
  18. 18.
    V. Z. Abdrakhimov, E. S. Abdrakhimova, and D. Yu. Denisov, Ceramic Building Materials [in Russian], Samara Academy of State and Municipal management, Samara (2010).Google Scholar
  19. 19.
    V. Z. Abdrakhimov, “Role of iron oxide in forming ceramic materials structure,” Izv. Vyssh. Uchebn. Zaved, Stroitel’stvo, No. 2, 31–37 (2009).Google Scholar
  20. 20.
    V. Z. Abdrakhimov, “Study of phase composition of heat insulation material based on solid slat waste and waterglass,” Izv. Vyssh. Uchebn. Zaved, Stroitel’stvo, No. 11 / 12, 33–38 (2008).Google Scholar

Copyright information

© Springer Science+Business Media New York 2013

Authors and Affiliations

  • V. Z. Abdrakhimov
    • 1
  • E. S. Abdrakhimova
    • 1
  1. 1.FGBOU VPO Samara Academy of State and Municipal ManagementSamaraRussia

Personalised recommendations