Advertisement

Refractories and Industrial Ceramics

, Volume 47, Issue 6, pp 351–354 | Cite as

Carbonated periclase refractories produced by hydrostatic molding for converter taphole blocks

  • S. A. Suvorov
  • V. A. Musevich
  • V. G. Dzhangiryan
  • M. S. Reznikov
  • I. N. Shakirov
Scientific Research and Developments
  • 14 Downloads

Abstract

A technology has been developed and implemented for producing joint-free continuous taphole blocks for steel-tapping units of large-size converters using hydrostatic molding. The functional parameters and properties of these taphole monoblocks are not inferior to imported analogs.

Keywords

Apparent Density Open Porosity Molding Pressure Carbonate Periclase Petersburg State Technological Institute 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    H. Jancen and H. Grosse Daldrup, “Development of refractory lining for basic oxygen furnaces in Germany,” in: Proc. of Conf. ISSTech 2003, 307–319 (2003).Google Scholar
  2. 2.
    V. I. Pishchida, “Reasons for the wear of the taphole unit in oxygen converters,” Nov. Ogneupory, No. 7, 6–10 (2005).Google Scholar
  3. 3.
    L. M. Aksel’rod, A. A. Trisvetov, and M. Tsai, “Refractory materials produced by the Dalmond Trading International Ltd.,” Nov. Ogneupory, No. 6, 9–10 (2005).Google Scholar
  4. 4.
    K. Asano, “Recent trends in refractory technologies for BOFs in Japan,” Inter. Refractory Manual, 6–12 (2004).Google Scholar
  5. 5.
    T. Harada, O. Matasura, and M. Uchida, “Comparison of the characteristics of MgO-C-bricks in different pressing methods”, Taikabutsu Refractories, 52(5), 266–270 (2000).Google Scholar
  6. 6.
    RF Pat. No. 2171243, S. A. Suvorov, A. V. Mozhzherin, A. V. Sakulin, S. V. Bocharov, N. V. Alekseeva, A. N. Novikov, G. N. Salagina, and E. A. Shtern, “The composition and production method of carbonated refractory mixtures,” Byull. Otkryt. Izobret., No. 7 (2001).Google Scholar
  7. 7.
    S. A. Suvorov and V. A. Musevich, “Catbonated periclase refractories with increased carbon content,” Nov. Ogneupory, No. 4, 39–40 (2005).Google Scholar
  8. 8.
    G. A. Libenson, V. Yu. Lopatin, and G. V. Komarnitskii, Powder Metallurgy Processes. Vol. 2. Formation and Sintering [in Russian], Izd. MISiS, Moscow (2002).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2006

Authors and Affiliations

  • S. A. Suvorov
    • 1
    • 2
    • 3
  • V. A. Musevich
    • 1
    • 2
    • 3
  • V. G. Dzhangiryan
    • 1
    • 2
    • 3
  • M. S. Reznikov
    • 1
    • 2
    • 3
  • I. N. Shakirov
    • 1
    • 2
    • 3
  1. 1.St. Petersburg State Technological Institute (Technical University)Russia
  2. 2.Federal Research Center “Institute of Applied Chemistry”Russia
  3. 3.Chapaev Cheboksarskii State Production CompanyRussia

Personalised recommendations