Advertisement

Refractories and Industrial Ceramics

, Volume 47, Issue 2, pp 116–120 | Cite as

Improving mold sets for large-sized components prepared from aqueous slips. Part 1. Working material for the mold set

  • E. I. Suzdal’tsev
  • D. V. Kharitonov
  • A. V. Dmitriev
  • T. P. Kamenskaya
Article
  • 31 Downloads

Abstract

Working materials for mold sets used in slip casting technology are reviewed. Benefits and shortcomings of the materials are discussed and routes towards improving their performance are suggested.

Keywords

Mold Plaster Mold Mold Material Slip Casting Ceramic Mold 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    A. G. Dobrovol’skii, Slip Casting [in Russian], Metallurgiya, Moscow (1974).Google Scholar
  2. 2.
    A. G. Romashin, E. I. Suzdal’tsev, and M. Yu. Rusin, “Fabrication of large-sized complex-shaped components from quartz ceramics: research and practical aspects,” Novye Ogneupory, No. 9, 34–40; No. 11, 20–27 (2004).Google Scholar
  3. 3.
    E. I. Suzdal’tsev, “Molding techniques using high-density aqueous suspensions of lithium aluminosilicate glasses,” Ogneup. Tekhn. Keram., No. 11, 10–23 (2002).Google Scholar
  4. 4.
    E. I. Suzdal’tsev and V. I. Kurakin, “A theoretical and computational model for the buildup of the wall thickness of a ceramic molding layer cast from an aqueous slip into a porous mold,” Ogneup. Tekhn. Keram., No. 10, 8–12 (2001).Google Scholar
  5. 5.
    E. I. Suzdal’tsev, “Fabrication of high-density quartz ceramics: research and practical aspects. Part 2._Shaping methods,” Novye Ogneupory, No. 9. 26–35 (2005).Google Scholar
  6. 6.
    E. I. Suzdal’tsev, “Technology and manufacture of lithium aluminosilicate glass ceramics. A statistical analysis,” Ogneup. Tekhn. Keram., No. 3, 12–18 (2004).Google Scholar
  7. 7.
    V. V. Platonov and M. Yu. Rusin, “A device for molding ceramic components using aqueous slips. RF Patent No. 2123928,” Byull. Otkr. Izobr., No. 36 (1998).Google Scholar
  8. 8.
    Yu. E. Pivinskii and A. G. Romashin, Quartz Ceramics [in Russian], Metallurgiya, Moscow (1974).Google Scholar
  9. 9.
    E. I. Suzdal’tsev and A. A. Efimova, “The effect of the form material and the method of forming on sintering and vitrification of quartz ceramics,” Neorg. Mater., 16(7), 1255–1258 (1980).Google Scholar
  10. 10.
    E. I. Suzdal’tsev, “Properties of quartz ceramics,” Neorg. Mater., 16(2), 330–335 (1984).Google Scholar
  11. 11.
    K. K. Tikhanovich and N. N. Teptyuk, “A material for molds used in ceramics industry, USSR Inventor’s Certiticate No. 554241,” Byull. Otkr. Izobr., No. 14 (as of May 3, 1974).Google Scholar
  12. 12.
    Yu. E. Pivinskii, P. P. Mityakin, V. A. Bevz, and N. N. Teptyuk, “A composite for casting molds, USSR Inventor’s Certiticate No. 806632,” Byull. Otkr. Izobr., No. 7 (as of February 23, 1981).Google Scholar
  13. 13.
    M. A. Akhmedov, K. É. Sarkisyan, P. F. Gordoneevskii, et al., “A mixture for plaster molds, USSR Inventor’s Certiticate No. 543635,” Byull. Otkr. Izobr., No. 33 (as of May 17, 1977).Google Scholar
  14. 14.
    S. A. Novikov, V. M. Shorokhov, V. D. Boguslavskii, “A composite for plaster molds, USSR Inventor’s Certiticate No. 789453,” Byull. Otkr. Izobr., No. 47 (as of December 23, 1980).Google Scholar
  15. 15.
    E. I. Suzdal’tsev, T. P. Kamenskaya, M. A. Suslova, et al., “An optimized technology for molding large-sized complex-shaped preforms from lithium aluminosilicate slips,” Ogneup. Tekhn. Keram., No. 5, 25–31 (2004).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2006

Authors and Affiliations

  • E. I. Suzdal’tsev
    • 1
  • D. V. Kharitonov
    • 1
  • A. V. Dmitriev
    • 1
  • T. P. Kamenskaya
    • 1
  1. 1.Technologiya Research and Production EnterpriseObninsk, Kaluga RegionRussia

Personalised recommendations