Advertisement

Refractories and Industrial Ceramics

, Volume 46, Issue 2, pp 81–84 | Cite as

A Technology for Production of Composite Refractory Materials for the Lining of Steel Ladles

  • Yu. N. Kochubeev
  • V. N. Kungurtsev
  • L. V. Mironova
  • Yu. V. Neklyudova
75 Years of the Central Laboratory at the Magnitogorsk Iron and Steel Works Joint-Stock Company
  • 19 Downloads

Abstract

Results of the testing of new refractory materials for the lining of steel ladles are reported. Refractories based on coarsely crystalline periclase (98% MgO) for the slag zone with an endurance of 55 – 60 heats and wear rate of 2.3 mm/heat were tested. For the bottom lining of the steel ladle, alumina-periclase-carbon refractories using fused or sintered alumomagnesian spinels are developed. Performance characteristics of the newly developed refractory materials are discussed.

Keywords

Periclase Performance Characteristic Bottom Lining Refractory Material Steel Ladle 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Copyright information

© Springer Science+Business Media, Inc. 2005

Authors and Affiliations

  • Yu. N. Kochubeev
    • 1
  • V. N. Kungurtsev
    • 1
  • L. V. Mironova
    • 1
  • Yu. V. Neklyudova
    • 1
  1. 1.Magnitogorsk Iron and Steel Works (MISW) Joint-Stock Co.MagnitogorskRussia

Personalised recommendations