Tribotechnical Characteristics of Superhard Boron Nitride-Based Materials During Dry Friction of Like Pairs

  • A. A. Adamovskii
  • A. V. Bochko
  • A. D. Kostenko
  • V. T. Varchenko

Friction units are made of superhard cubic boron nitride-based materials by vacuum brazing and subjected to end-to-end dry friction testing. It is established that the friction factor decreases as the modulus of elasticity of superhard material is decreased and the loading and friction speed are increased.


friction factor dry friction wearing superhard material loading 


  1. 1.
    V. P. Bondarenko, Tribotechnical Composites with High-Modulus Fillers [in Russian], Naukova Dumka, Kiev (1987), p. 232Google Scholar
  2. 2.
    N. V. Novikov, et al., Synthesis of Superhard Materials, Vol. 1 of the three-volume series Synthetic Superhard Materials [in Russian], Naukova Dumka, Kiev (1986), p. 280Google Scholar
  3. 3.
    G. G. Karyuk, Technological Features of Machining by Tools Made of Polycrystalline Superhard Materials [in Russian], Naukova Dumka, Kiev (1991), p. 288.Google Scholar
  4. 4.
    G. G. Karyuk, L. F. Kolesnichenko, A. I. Yuga, et al., “Frictional properties of materials based on dense modifications of boron nitride,” Powder Metall. Met. Ceram., 23, No. 9, 727–731 (1984).Google Scholar
  5. 5.
    E. S. Bogorodskii and G. L. Aparnikov, “Research on contact friction between polycrystals of cubic boron nitride, hard alloy, and steel,” Diamonds Superhard Mater., No. 1, 12–14 (1981).Google Scholar
  6. 6.
    I. M. Fedorchenko and L. I. Pugina, Sintered Antifriction Composite Materials [in Russian], Naukova Dumka, Kiev (1980), p. 404.Google Scholar
  7. 7.
    Yu. T. Varchenko (ed.), Surface Properties of Melts and Solids and Their Application in Materials Science [in Russian], Naukova Dumka, Kiev (1991), p. 280Google Scholar
  8. 8.
    A. A. Adamovskii, V. M. Emtsov, and V. T. Varchenko, Technique for research on the tribotechnical properties of superhard materials based on dense boron nitride,” Adhes. Melts Mater. Braz., No. 42, 77–84 (2009).Google Scholar
  9. 9.
    L. F. Kolesnichenko, V. V. Polotai, L. V. Zabolotnyi, et al., “Technique for the simultaneous friction and wear study of powder metallurgy materials,” Powder Metall. Met. Ceram., 9, No. 3, 224–228 (1970).CrossRefGoogle Scholar
  10. 10.
    F. P. Bouden and D. Teybor, Friction and Lubrication [in Russian], Mashgiz, Moscow (1960), p. 151.Google Scholar
  11. 11.
    I. V. Kragel’skii, Friction and Wear [in Russian], Mashinostroyeniye, Moscow (1968), p. 480.Google Scholar
  12. 12.
    V. I. Anuriev, Handbook of Mechanical Engineering Designer [in Russian], Vol. 1, Mashinostroyeniye, Moscow (1979), p. 728.Google Scholar

Copyright information

© Springer Science+Business Media New York 2015

Authors and Affiliations

  • A. A. Adamovskii
    • 1
  • A. V. Bochko
    • 1
  • A. D. Kostenko
    • 1
  • V. T. Varchenko
    • 1
  1. 1.Frantsevich Institute for Problems of Materials ScienceNational Academy of Sciences of UkraineKiev.Ukraine

Personalised recommendations