Advertisement

Powder Metallurgy and Metal Ceramics

, Volume 44, Issue 11–12, pp 531–536 | Cite as

Tribological properties of detonation coatings based on titanium aluminides and aluminum titanate

  • V. E. Oliker
  • V. L. Sirovatka
  • E. F. Grechishkin
  • A. D. Kostenko
  • V. V. Lashneva
  • I. I. Maksyuta
  • Yu. F. Anikin
  • A. F. Goncharenko
  • V. M. Derkach
Article

Abstract

Operation of coatings based on tialite, γ-TiAl, titanium aluminides with discrete inclusions of TiN and also alloys based on cobalt, nickel, and titanium in friction pairs with polyethylene grade “Chirulen” and stainless steel 12Kh18N10T is studied. It is established that tialite coatings formed from nanostructure powders of Ti-Al by detonation deposition are the best for operation under dry friction conditions in a pair with stainless steel 12Kh18N10T (minimum friction coefficient and minimum wear of the contact surfaces). It is shown that in the sliding rate range selected effective operation of material in friction pairs with polymer is provided due to transfer it to the contact surface and formation between rubbing surfaces of a thin film fulfilling the function of a solid lubricant. It is established that stable operation with the minimum wear in a friction pair with polyethylene grade “ Chirulen” is provided by a coating of γ-TiAl and Al2TiO5, and also coatings based on titanium aluminide with fine TiN inclusions.

Keywords

tribological properties wear-resistant coating tialite gamma-aluminum-titanium alloy structure 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    B. F. Coll and P. Jaquot, “Surface modification of medical implants and surgical devices using TiN layers,” Surface Coat. Techn., 36, 867–878 (1988).Google Scholar
  2. 2.
    V. E. Oliker, V. L. Sirovatka, I. I. Timofeeva, et al., “Effect of structure and properties of titanium aluminide powder on the phase and structure formation of detonation coatings,” Poroshk. Metall., Nos. 9–10, 74–84 (2005).Google Scholar
  3. 3.
    V. E. Oliker and V. S. Kresanov, “Scandium-containing gamma-titanium aluminide alloys and coatings for aerospace structural parts,” in: Advanced Materials and Processes for Gas Turbines, The Minerals, Metals and Materials Sci., Warrendale (2003).Google Scholar
  4. 4.
    J. I. Tipper, P. J. Firkins, E. Ingham, et al., “Qualitative analysis of wear debris from low and high carbon content cobalt-chrome alloys used in metal on metal total hip replacements,” J. Mat. Sci. Mat. Medicine, 10, No. 6, 353–362 (1999).Google Scholar
  5. 5.
    G. S. Skubachevskii, Aviation Gas Turbine Engines. Construction and Design of Components [in Russian], Mashinostroenie, Moscow (1965).Google Scholar
  6. 6.
    Yu. F. Anikin, N. I. Maksiyta, V. M. Slepchenko, et al., “Modern bio-compatible alloys on a chromium-cobalt basis,” Int. Conf. “Advanced materials.” Symp. A: Engineering of Technologies and Perspectives, Kiev (1999).Google Scholar
  7. 7.
    J. Beoes and K. Bucci, “The influence of surface conditions on the localized corrosion of 316L stainless steel orthopedic implants,” J. Mat. Sci. Mat. Medicine, 10, No. 7, 389–394 (1999).Google Scholar
  8. 8.
    V. E. Oliker, V. S. Kresanov, V. L. Sirovatka, et al., “Mechanochemical synthesis, structure and properties of alloys based on the Ti-Al system,” Poroshk. Metall., Nos. 1–2, 43–56 (2003).Google Scholar
  9. 9.
    L. I. Tushinskii and A. V. Plokhov, Study of the Structure and Physicomechanical Properties of Coatings [in Russian], Nauka, Novosibirsk (1986).Google Scholar
  10. 10.
    D. Moore, Bases and Application of Tribonics [Russian translation], Mir, Moscow (1978).Google Scholar
  11. 11.
    B. B. Chechulin, S. S. Ushkov, I. N. Razuvaeva, and V. N. Gol’dfein, Titanium Alloys in Engineering [in Russian], Mashinostroenie, Leningrad (1977).Google Scholar
  12. 12.
    I. V. Kragel’skii, Friction and Wear [in Russian], Mashinostroenie, Moscow (1968).Google Scholar
  13. 13.
    N. M. Bobkova and L. M. Silich, “Thermally stable ceramics and glass ceramics based on aluminum titanate,” Zhurn. Vsessoyuz. Khim. Obshch. im. D. M. Mendeleeva, 36, 564–569 (1991).Google Scholar
  14. 14.
    A. V. Chichenadze, A. L. Levin, M. M. Borodulin, and E. V. Zinov’ev, Polymers in Friction Assemblies of Machines and Instruments [in Russian], Mashinostroenie, Moscow (1988).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2005

Authors and Affiliations

  • V. E. Oliker
    • 1
  • V. L. Sirovatka
    • 1
  • E. F. Grechishkin
    • 1
  • A. D. Kostenko
    • 1
  • V. V. Lashneva
    • 1
  • I. I. Maksyuta
    • 1
  • Yu. F. Anikin
    • 1
  • A. F. Goncharenko
    • 1
  • V. M. Derkach
    • 1
  1. 1.Institute for Problems of Materials ScienceNational Academy of Sciences of UkraineKiev

Personalised recommendations