Three-dimensional (3D) printing methods used to manufacture drug delivery systems, including inkjet printing, fused deposition modeling, and tablet production from powered substances, are reviewed. Various dosage forms prepared using 3D printing technologies over the past 10 years are summarized.
Similar content being viewed by others
References
O. A. Terent’eva, The Role of Science and Technology in the Modern World: Collection of Articles of an International Scientific and Practical Conference [in Russian], Chelyabinsk (2016), pp. 15 – 18.
N. Sandler and M. Preis, Trends Pharmacol. Sci., 37(12), 1070 – 1080 (2016).
D. Gunther, B. Heymel, J. Franz, et al., Rapid Prototyping J., 20(4), 320 – 327 (2014).
J. Goole and K. Amighi, Int. J. Pharm., 499(1 – 2), 376 – 394 (2016).
D. G. Yu, L. M. Zhu, C. J. Brandford-White, et al., J. Pharm. Sci., 97(9), 3666 – 3690 (2008).
C. W. Rowe,W. E. Katstra, R. D. Palazzolo, et al., J. Controlled Release, 66(1), 11 – 17 (2000).
S. E. Moulton and G. G. Wallace, J. Controlled Release, 193, 27 – 34 (2014).
M. Alomari, F. H. Mohamed, A. W. Basit, et al., Int. J. Pharm., 494(2), 568 – 577 (2015).
W. E. Katstra, R. D. Palazzolo, C. W. Rowe, et al., J. Controlled Release, 66(1), 1 – 9 (2000).
R. Daly, T. S. Harrington, G. D. Martin, et al., Int. J. Pharm., 494(2), 554 – 567 (2015).
L. K. Prasad and H. Smyth, Drug Dev. Ind. Pharm., 42(7), 1019 – 1031 (2016).
J. Sumerel, J. Lewis, A. Doraiswamy, et al., Biotechnol. J., 1(9), 976 – 987 (2006).
M. Cima, E. Sachs, et al., US Pat. 5,387,380A, Feb. 7, 1995.
E. T. Zhilyakova, O. O. Novikov, M. A. Khalikova, et al., Nauchn. Vedom. BelGU, Ser.: Med. Farm., No. 22(93), No. 12 / 2, 47 – 51 (2010).
N. Sandler, I. Salmela, A. Fallarero, et al., Int. J. Pharm., 459(1 – 2), 62 – 64 (2014).
J. Skowyra, K. Pietrzak, and M. A. Alhnan, Eur. J. Pharm. Sci., 68, 11 – 17 (2015).
A. Goyanes, A. B. M. Buanz, A. W. Basit, et al., Int. J. Pharm., 476(1 – 2), 88 – 92 (2014).
M. M. Crowley, F. Zhang, M. A. Repka, et al., Drug Dev. Ind. Pharm., 33(9), 909 – 926 (2007).
S. A. Khaled, J. C. Burley, M. R. Alexander, et al., Int. J. Pharm., 461, 105 – 111 (2014).
https: // www.aprecia.com / zipdose-platform / 3d-printing.php
D. G. Yu, C. Branford-White, Z. H. Ma, et al., Int. J. Pharm., 370, 160 – 166 (2009).
A. Goyanes, A. B. M. Buanz, G. B. Hatton, et al., Eur. J. Pharm. Biopharm., 89, 157 – 162 (2015).
A. Goyanes, J. Wang, A. Buanz, et al., Mol. Pharm., No. 12, 4077 – 4084 (2015).
K. Pietrzak, A. Isreb, and M. A. Alhnan, Eur. J. Pharm. Biopharm., 96, 380 – 387 (2015).
D. G. Yu, X. L. Yang, W. D. Huang, et al., J. Pharm. Sci., 96, 2446 – 2456 (2007).
D. G. Yu, C. Branford-White, Y. C. Yang, et al., Drug Dev. Ind. Pharm., 35, 1530 – 1536 (2009).
D. G. Yu, X. X. Shen, J. Han, et al., in: Abstracts of the International Conference on Bioinformatics and Biomedical Engineering, Athens (2008).
D. G. Yu, X. X. Shen, C. Branford-White, et al., J. Pharm. Pharmacol., 61, 323 – 329 (2009).
S. A. Khaled, J. C. Burley, M. R. Alexander, et al., Int. J. Pharm., 494, 643 – 650 (2015).
A. Melocchi, F. Parietti, G. Loreti, et al., J. Drug Delivery Sci. Technol., 30, Part B, 360 – 367 (2015).
A. A. Semin, E. N. Gruzinova, and K. E. Borisov, New Manufacturing Technologies – Foundation of Russian Manufacturing Safety [in Russian], Nauka, Moscow (2015).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimiko-Farmatsevticheskii Zhurnal, Vol. 51, No. 11, pp. 40 – 44, November, 2017.
Rights and permissions
About this article
Cite this article
Narkevich, I.A., Flisyuk, E.V., Terent’eva, O.A. et al. Additive Manufacturing Technologies for Pharmaceutics. Pharm Chem J 51, 1025–1029 (2018). https://doi.org/10.1007/s11094-018-1733-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11094-018-1733-5