Abstract
The developed Mn–Co and Mn–Co–Cu electroplated AISI 430 stainless steels were annealed in argon and further treated in oxygen, at 800 °C for 4 h in each step. The XRD results after the heat treatment exhibited the formation of MnCo2O4 and Co3O4 for the Mn–Co sample, and CoCuMnOx and Co3O4 for the Mn–Co–Cu sample. A further oxidation test in O2–5%H2O at 600–800 °C showed that the oxidation kinetics of the coated samples followed the parabolic rate law and the Arrhenius relation. The oxidation rate of the steel was reduced by the coatings. The Cr-species volatilisation from the coated samples exposed to O2–5%H2O at 800 °C was measured and gave values in the order of 10–11 g cm–2 s–1. The additional annealing process could help form a dense coating, thus contributing to a reduced rate of oxidation.
Similar content being viewed by others
References
S. C. Singhal, Solid State Ionics. 152, 2002 (405).
P. Singh and N. Q. Minh, International Journal of Applied Ceramic Technology. 1, 2004 (5).
W. Z. Zhu and S. C. Deevi, Materials Science and Engineering: A. 348, 2003 (227).
J. W. Fergus, Materials Science and Engineering: A. 397, 2005 (271).
J. Wu and X. Liu, Journal of Materials Science and Technology. 26, 2010 (293).
E. J. Opila, D. L. Myers, N. S. Jacobson, I. M. Nielsen, D. F. Johnson, J. K. Olminsky, and M. D. Allendorf, The Journal of Physical Chemistry A. 111, 2007 (1971).
W. Wongpromrat, H. Thaikan, W. Chandra-ambhorn, and S. Chandra-ambhorn, Oxidation of Metals. 79, 2013 (529).
Z. Yang, G.-G. Xia, X.-H. Li, and J. W. Stevenson, International Journal of Hydrogen Energy. 32, 2007 (3648).
D. R. Ou, M. Cheng, and X.-L. Wang, Journal of Power Sources. 236, 2013 (200).
A. Bakhshi-Zadeh, S. Salmani, M. A. Faghihi-Sani, H. Abdoli, and N. Jalili, Oxidation of Metals. 93, 2020 (401).
T. Uehara, N. Yasuda, M. Okamoto, and Y. Baba, Journal of Power Sources. 196, 2011 (7251).
J. Puranen, J. Lagerbom, L. Hyvärinen, T. Mäntylä, E. Levänen, M. Kylmälahti, and P. Vuoristo, Surface and Coatings Technology. 205, 2010 (1029).
S. J. Han, Z. Pala, and S. Sampath, Journal of Power Sources. 304, 2016 (234).
T. Thublaor and S. Chandra-ambhorn, Corrosion Science. 174, 108802 (2020).
X. Chen, P. Y. Hou, C. P. Jacobson, S. J. Visco, and L. C. De Jonghe, Solid State Ionics. 176, 2005 (425).
Z. Yang, G. Xia, S. P. Simner, and J. W. Stevenson, Journal of The Electrochemical Society. 152, 2005 (A1896).
A. Petric and H. Ling, Journal of the American Ceramic Society. 90, 2007 (1515).
B.-K. Park, J.-W. Lee, S.-B. Lee, T.-H. Lim, S.-J. Park, C.-O. Park, and R.-H. Song, International Journal of Hydrogen Energy. 38, 2013 (12043).
G. Chen, X. Xin, T. Luo, L. Liu, Y. Zhou, C. Yuan, C. Lin, Z. Zhan, and S. Wang, Journal of Power Sources. 278, 2015 (230).
J. Xiao, W. Zhang, C. Xiong, B. Chi, J. Pu, and L. Jian, International Journal of Hydrogen Energy. 40, 2015 (1868).
T. Brylewski, A. Kruk, M. Bobruk, A. Adamczyk, J. Partyka, and P. Rutkowski, Journal of Power Sources. 333, 2016 (145).
J. Xiao, W. Zhang, C. Xiong, B. Chi, J. Pu, and L. Jian, International Journal of Hydrogen Energy. 41, 2016 (9611).
B. Talic, P. V. Hendriksen, K. Wiik, and H. L. Lein, Solid State Ionics. 326, 2018 (90).
B. Talic, P. V. Hendriksen, K. Wiik, and H. L. Lein, Solid State Ionics. 332, 2019 (16).
C. D. Kumar, A. Dekich, H. Wang, Y. Liu, W. Tilson, J. Ganley, and J. Fergus, Journal of The Electrochemical Society. 161, 2014 (F47).
W. Kanyarat, P. Limprapard, T. Siripongsakul, S. Chandra-ambhorn, P. Visuttipitukul, and K. Taweesup, Materials Testing. 59, 2017 (951).
A. Masi, M. Bellusci, S. J. McPhail, F. Padella, P. Reale, J.-E. Hong, R. Steinberger-Wilckens, and M. Carlini, Ceramics International. 43, 2017 (2829).
J. C. Mah, A. Muchtar, M. R. Somalu, M. J. Ghazali, and J. Raharjo, Ceramics International. 43, 2017 (7641).
G. Jalilvand and M.-A. Faghihi-Sani, International Journal of Hydrogen Energy. 38, 2013 (12007).
B. Talic, S. Molin, K. Wiik, P. V. Hendriksen, and H. L. Lein, Journal of Power Sources. 372, 2017 (145).
B. Hua, J. Pu, W. Gong, J. Zhang, F. Lu, and L. Jian, Journal of Power Sources. 185, 2008 (419).
W. Wongpromrat, G. Berthomé, V. Parry, S. Chandra-ambhorn, W. Chandra-ambhorn, C. Pascal, A. Galerie, and Y. Wouters, Corrosion Science. 106, 2016 (172).
B. Talic, H. Falk-Windisch, V. Venkatachalam, P. V. Hendriksen, K. Wiik, and H. L. Lein, Journal of Power Sources. 354, 2017 (57).
H. Falk-Windisch, J. E. Svensson, and J. Froitzheim, Journal of Power Sources. 287, 2015 (25).
R. Sachitanand, M. Sattari, J.-E. Svensson, and J. Froitzheim, International Journal of Hydrogen Energy. 38, 2013 (15328).
I. Barin, Thermochemical Data of Pure Substances, (VCH, Germany, 1989).
O. Kubaschewski, C. B. Alcock, and P. J. Spencer, Materials Thermochemistry, 6th ed (Pergamon, Great Britain, 1993),.
R. Speiser, H. L. Johnston, and P. Blackburn, Journal of the American Chemical Society. 72, 1950 (4142).
D. J. Young and B. A. Pint, Oxidation of Metals. 66, 2006 (137).
G. R. Holcomb and D. E. Alman, Scripta Materialia. 54, 2006 (1821).
A. Galerie, M.R. Ardigo, P. Berthod, W. Chandra-ambhorn, S. Chevalier, P.Y. Hou, and F. Rouillarrd, Influence of water vapor on high-temperature oxidation of chromia-forming materials, Chapter 1, in: S. Chevalier and J. Favergeon (Eds.), French Activity On High Temperature Corrosion In Water Vapor, Switzerland: Trans Tech Publications, 2014.
W. Z. Zhu and S. C. Deevi, Materials Research Bulletin. 38, 2003 (957).
P. Piccardo, P. Gannon, S. Chevalier, M. Viviani, A. Barbucci, G. Caboche, R. Amendola, and S. Fontana, Surface and Coatings Technology. 202, 2007 (1221).
Acknowledgements
This research was funded by Thailand Research Fund (PHD/0156/2558) and by King Mongkut’s University of Technology North Bangkok (Contract no. KMUTNB-BasicR-64-27).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Thublaor, T., Wiman, P., Siripongsakul, T. et al. Development of Annealed Mn–Co and Mn–Co–Cu Coated AISI 430 Stainless Steels for SOFC Interconnect Application. Oxid Met 96, 93–103 (2021). https://doi.org/10.1007/s11085-021-10052-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11085-021-10052-9