A nonlinear dynamic vibration model of cylindrical roller bearing considering skidding


This paper proposes a dynamic model to investigate the vibration response of a cylindrical roller bearing considering skidding. This model considers the frictional forces and the contact forces between rolling elements and races simultaneously. The interactions between the frictional forces and the dynamic responses of rolling bearing when skidding happens are also included in the model. It improves previous quasi-dynamic models in which the contact forces and frictional forces between races and rolling elements were determined by a separate load distribution model via the static force and moment equilibrium equations for races. The variations of the friction forces in a rotational period are elaborated, and the generating mechanism is also explained. It is found that the existence of skidding may lead to fluctuations and a significant increase of the friction force. The effect of skidding on the bearing vibration is studied by comparing the simulated results with those predicted by previous models under the pure rolling assumption. The results show that the friction forces will increase the vibration level and introduce impact components into the vibration response. It is necessary to consider the influence of skidding on the bearing vibration response using the proposed model, especially for high-speed bearings.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14


  1. 1.

    Shah, D.S., Patel, V.N.: Theoretical and experimental vibration studies of lubricated deep groove ball bearings having surface waviness on its races. Measurement 129, 405–423 (2018)

    Article  Google Scholar 

  2. 2.

    Moazen Ahmadi, A., Petersen, D., Howard, C.: A nonlinear dynamic vibration model of defective bearings—the importance of modelling the finite size of rolling elements. Mech. Syst. Signal Process. 52–53, 309–326 (2015)

    Article  Google Scholar 

  3. 3.

    Han, Q., Ding, Z., Qin, Z., Wang, T., Xu, X., Chu, F.: A triboelectric rolling ball bearing with self-powering and self-sensing capabilities. Nano Energy 67, 104277 (2020)

    Article  Google Scholar 

  4. 4.

    Han, Q., Wang, T., Ding, Z., Xu, X., Chu, F.: Magnetic equivalent modeling of stator currents for localized fault detection of planetary gearboxes coupled to electric motors. IEEE Trans. Ind. Electron. 68, 2575–2586 (2020)

    Article  Google Scholar 

  5. 5.

    Sunnersjö, C.S.: Varying compliance vibrations of rolling bearings. J. Sound Vib. 58, 363–373 (1978)

    Article  Google Scholar 

  6. 6.

    Fukata, S., Gad, E.H., Kondou, T., Ayabe, T., Tamura, H.: On the radial vibration of ball bearings. Bull. JSME. 28, 899–904 (1985)

    Article  Google Scholar 

  7. 7.

    Aktürk, N., Gohar, R.: The effect of ball size variation on vibrations associated with ball-bearings. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 212, 101–110 (1998)

    Article  Google Scholar 

  8. 8.

    Liu, J., Shao, Y., Lim, T.C.: Vibration analysis of ball bearings with a localized defect applying piecewise response function. Mech. Mach. Theory 56, 156–169 (2012)

    Article  Google Scholar 

  9. 9.

    Kankar, P.K., Sharma, S.C., Harsha, S.P.: Nonlinear vibration signature analysis of a high speed rotor bearing system due to race imperfection. J. Comput. Nonlinear Dyn. 7, 011014 (2012)

    Article  Google Scholar 

  10. 10.

    Harsha, S.P., Sandeep, K., Prakash, R.: Non-linear dynamic behaviors of rolling element bearings due to surface waviness. J. Sound Vib. 272, 557–580 (2004)

    Article  Google Scholar 

  11. 11.

    Harsha, S.P., Kankar, P.K.: Stability analysis of a rotor bearing system due to surface waviness and number of balls. Int. J. Mech. Sci. 46, 1057–1081 (2004)

    Article  Google Scholar 

  12. 12.

    Tadina, M., Boltežar, M.: Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up. J. Sound Vib. 330, 4287–4301 (2011)

    Article  Google Scholar 

  13. 13.

    Patel, V.N., Tandon, N., Pandey, R.K.: Dynamic model for vibration studies of deep groove ball bearings considering single and multiple defects in races. J. Tribol. 132, 041101 (2010)

    Article  Google Scholar 

  14. 14.

    Han, Q., Ding, Z., Xu, X., Wang, T., Chu, F.: Stator current model for detecting rolling bearing faults in induction motors using magnetic equivalent circuits. Mech. Syst. Signal Process. 131, 554–575 (2019)

    Article  Google Scholar 

  15. 15.

    Cong, F., Chen, J., Dong, G., Pecht, M.: Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis. J. Sound Vib. 332, 2081–2097 (2013)

    Article  Google Scholar 

  16. 16.

    Zhang, X., Han, Q., Peng, Z., Chu, F.: Stability analysis of a rotor-bearing system with time-varying bearing stiffness due to finite number of balls and unbalanced force. J. Sound Vib. 332, 6768–6784 (2013)

    Article  Google Scholar 

  17. 17.

    Tu, W., Yang, J., Yu, W.: Contact characteristic and vibration mechanism of rolling element bearing in the process of fault evolution. Proc. Inst. Mech. Eng. Part K J. Multi-body Dyn. (2021). https://doi.org/10.1177/1464419320985707

    Article  Google Scholar 

  18. 18.

    Han, Q., Li, X., Chu, F.: Skidding behavior of cylindrical roller bearings under time-variable load conditions. Int. J. Mech. Sci. 135, 203–214 (2018)

    Article  Google Scholar 

  19. 19.

    Tu, W., Luo, Y., Yu, W., Yu, Y.: Investigation of the dynamic local skidding behaviour of rollers in cylindrical roller bearings. Proc. Inst. Mech. Eng. Part K J. Multi-body Dyn. 233, 899–909 (2019)

    Article  Google Scholar 

  20. 20.

    Harris, T.A.: An analytical method to predict skidding in high speed roller bearings. ASLE Trans. 9, 229–241 (1966)

    Article  Google Scholar 

  21. 21.

    Tu, W., Shao, Y., Mechefske, C.K.: An analytical model to investigate skidding in rolling element bearings during acceleration. J. Mech. Sci. Technol. 26, 2451–2458 (2012)

    Article  Google Scholar 

  22. 22.

    Xu, T., Xu, G., Zhang, Q., Hua, C., Tan, H., Zhang, S., Luo, A.: A preload analytical method for ball bearings utilising bearing skidding criterion. Tribol. Int. 67, 44–50 (2013)

    Article  Google Scholar 

  23. 23.

    Wang, Y., Wang, W., Zhang, S., Zhao, Z.: Investigation of skidding in angular contact ball bearings under high speed. Tribol. Int. 92, 404–417 (2015)

    Article  Google Scholar 

  24. 24.

    Han, Q., Chu, F.: Nonlinear dynamic model for skidding behavior of angular contact ball bearings. J. Sound Vib. 354, 219–235 (2015)

    Article  Google Scholar 

  25. 25.

    Liu, Y., Chen, Z., Tang, L., Zhai, W.: Skidding dynamic performance of rolling bearing with cage flexibility under accelerating conditions. Mech. Syst. Signal Process. 150, 107257 (2021)

    Article  Google Scholar 

  26. 26.

    Babu, C.K., Tandon, N., Pandey, R.K.: Vibration modeling of a rigid rotor supported on the lubricated angular contact ball bearings considering six degrees of freedom and waviness on balls and races. J. Vib. Acoust. 134, 1–12 (2012)

    Article  Google Scholar 

  27. 27.

    Niu, L., Cao, H., He, Z., Li, Y.: A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects. J. Sound Vib. 357, 207–232 (2015)

    Article  Google Scholar 

  28. 28.

    Harris, T.A., Kotzalas, M.N.: Rolling Bearing Analysis: Essential Concepts of Bearing Technology. Taylor & Francis, Boca Raton (2007)

    Google Scholar 

  29. 29.

    Tomovic, R., Miltenovic, V., Banic, M., Miltenovic, A.: Vibration response of rigid rotor in unloaded rolling element bearing. Int. J. Mech. Sci. 52, 1176–1185 (2010)

    Article  Google Scholar 

  30. 30.

    Liu, J., Shao, Y.: Vibration modelling of nonuniform surface waviness in a lubricated roller bearing. J. Vib. Control. 23, 1115–1132 (2017)

    Article  Google Scholar 

  31. 31.

    Goksem, P.G., Hargreaves, R.A.: The effect of viscous shear heating on both film thickness and rolling traction in an ehl line contact part I: fully flooded conditions. J. Tribol. 100, 346–352 (1978)

    Google Scholar 

  32. 32.

    Kannel, J.W., Walowit, J.A.: Simplified analysis for tractions between rolling-sliding elastohydrodynamic contacts. J. Lubr. Technol. 93, 39–44 (1971)

    Article  Google Scholar 

  33. 33.

    Gupta, P.K., Cheng, H.S., Zhu, D., Forster, N.H., Schrand, J.B.: Viscoelastic effects in MIL-L-7808-type lubricant, part I: analytical formulation. Tribol. Trans. 35, 269–274 (1992)

    Article  Google Scholar 

  34. 34.

    Cao, H., Niu, L., Xi, S., Chen, X.: Mechanical model development of rolling bearing-rotor systems: a review. Mech. Syst. Signal Process. 102, 37–58 (2018)

    Article  Google Scholar 

  35. 35.

    Ghaisas, N., Wassgren, C.R., Sadeghi, F.: Cage instabilities in cylindrical roller bearings. J. Tribol. 126, 681–689 (2004)

    Article  Google Scholar 

  36. 36.

    Wang, F., Jing, M., Yi, J., Dong, G., Liu, H., Ji, B.: Dynamic modelling for vibration analysis of a cylindrical roller bearing due to localized defects on raceways. Proc. Inst. Mech. Eng. Part K J. Multi-body Dyn. 229, 39–64 (2015)

    Google Scholar 

  37. 37.

    Zhang, W., Deng, S., Chen, G., Cui, Y.: Study on the impact of roller convexity excursion of high-speed cylindrical roller bearing on roller’s dynamic characteristics. Mech. Mach. Theory. 103, 21–39 (2016)

    Article  Google Scholar 

  38. 38.

    Li, Y., Cao, H., Niu, L., Jin, X.: A general method for the dynamic modeling of ball bearing-rotor systems. J. Manuf. Sci. Eng. 137, 1–12 (2015)

    Google Scholar 

  39. 39.

    Sopanen, J., Mikkola, A.: Dynamic model of a deep-groove ball bearing including localized and distributed defects. Part 1: theory. Proc. Inst. Mech. Eng. Part K J. Multi-body Dyn. 217, 201–211 (2003)

    Article  Google Scholar 

  40. 40.

    Petersen, D., Howard, C., Sawalhi, N., Moazen Ahmadi, A., Singh, S.: Analysis of bearing stiffness variations, contact forces and vibrations in radially loaded double row rolling element bearings with raceway defects. Mech. Syst. Signal Process. 50–51, 139–160 (2015)

    Article  Google Scholar 

Download references


The research work done in the paper was supported by the National Natural Science Foundation of China (Project Nos. 51965018, 51865010) and the Education Department Science and Technology Project of Jiangxi Province (Project No. GJJ200613).

Author information



Corresponding author

Correspondence to Wennian Yu.

Ethics declarations

Conflict of interest

The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Tu, W., Yu, W., Shao, Y. et al. A nonlinear dynamic vibration model of cylindrical roller bearing considering skidding. Nonlinear Dyn 103, 2299–2313 (2021). https://doi.org/10.1007/s11071-021-06238-0

Download citation


  • Cylindrical roller bearing
  • Skidding
  • Vibration model
  • Friction force
  • Viscous drag force