Preparation of TiO2-loaded electrospun fibers of polylactide/poly(vinylpyrrolidone) blends for use as catalysts in epoxidation of unsaturated oils

  • Bunthoeun Nim
  • Paiboon Sreearunothai
  • Atitsa Petchsuk
  • Pakorn Opaprakasit
Research Paper


Nanofibers of polylactide (PLA)/poly(vinylpyrrolidone) (PVP) blends, loaded with TiO2 nanoparticles, have been prepared by an electrospinning method. The electrospun fiber mats were characterized by ATR-FTIR, X-ray diffraction (XRD), SEM, EDX, and UV-visible spectroscopy to examine structures, functional groups, crystallinity, surface morphology, and UV absorptivity. It is clearly observed that TiO2 particles are embedded on the filaments. All PLA-based spun fibers are completely amorphous in nature. The surface morphology of those blended with PVP is smoother and more uniform than the corresponding samples without PVP. Neat PLA fibers show a UV absorption band at around 200 nm, whereas the fibers loaded with TiO2 nanoparticles show an additional absorption band covering the 200–380-nm region. Photo-degradation of the fiber samples are conducted in phosphate buffer solution (PBS) under UVA light. The results indicate that the PVP component dissolves into the PBS solution, and the PLA matrix degrades as a function of time. The fibers are then applied as a catalytic system for epoxidation of unsaturated sunflower oil (SFO), for use as additives or plasticizers for biopolymers, employing a performic acid oxidizing agent. The fibers, especially those containing PVP, can effectively enhance the epoxidation yield of oils with a slow rate of undesirable side reactions, which break ester bonds of triglycerides to generate free fatty acids.


Polylactide Poly(vinylpyrrolidone) TiO2 Electrospinning Degradation Epoxidation Nanofibers Nanostructured catalyst 



The authors gratefully acknowledge the financial support from the National Research University (NRU) grant, provided by The Office of Higher Education Commission (OHEC) and the Center of Excellence in Materials and Plasma Technology (CoE M@P Tech), Thammasat University, Thailand. P.S. gratefully acknowledges financial support from Thammasat University Research Fund year 2554. B.N. thanks the support from the Excellent Foreign scholarship (EFS) program provided by SIIT.


This study was funded by the National Research University (NRU) grant, provided by The Office of Higher Education Commission (OHEC), Thammasat University Research Fund year 2554, and the Center of Excellence in Materials and Plasma Technology (CoE M@P Tech), Thammasat University, Thailand.

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

Supplementary material

11051_2018_4199_Fig14_ESM.gif (49 kb)

ATR-FTIR spectra of: (a) sunflower oil (SFO), (b) ESFO-1, (c) P-T-SFO-1, and (d) P-P-T-SFO-1, obtained from epoxidation reaction at 65 °C. (GIF 48 kb)

11051_2018_4199_MOESM1_ESM.tiff (7.4 mb)
High resolution image (TIFF 7592 kb)
11051_2018_4199_Fig15_ESM.gif (82 kb)

Curve fitting results from FTIR bands of olefinic bond and FFA liberation of (a)-(b) ESFO-1, (c)-(d) P-T-ESFO-1, and (e)-(f) P-P-T-ESFO-1, obtained from epoxidation reaction at 65 °C. (GIF 81 kb)

11051_2018_4199_MOESM2_ESM.tiff (3.4 mb)
High resolution image (TIFF 3503 kb)
11051_2018_4199_Fig16_ESM.gif (56 kb)

ATR-FTIR spectra of fiber catalyst before and after epoxidation process: (a) P-P-T15 fiber, (b) P-P-T-ESFO-0.5 (65 °C), (c) P-P-T-ESFO-0.5 (room temp.), and (d) P-T-ESFO-0.5 (room temp.). (GIF 56 kb)

11051_2018_4199_MOESM3_ESM.tiff (8.6 mb)
High resolution image (TIFF 8845 kb)


  1. Ali NA, Noori FTM (2014) Gas barrier properties of biodegradable polymer nanocomposites films. Chem Mater Res 6(1)Google Scholar
  2. Ao CH, Lee SC, Mak CL, Chan LY (2003) Photodegradation of volatile organic compounds (VOCs) and NO for indoor air purification using TiO2: promotion versus inhibition effect of NO. Appl Catal B Environ 42(2):119–129. CrossRefGoogle Scholar
  3. Benaniba MT, Belhaneche-Bensemra N, Gelbard G (2003) Stabilization of PVC by epoxidized sunflower oil in the presence of zinc and calcium stearates. Polym Degrad Stab 82(2):245–249. CrossRefGoogle Scholar
  4. Bouchareb B, Benaniba MT (2008) Effects of epoxidized sunflower oil on the mechanical and dynamical analysis of the plasticized poly(vinyl chloride). J Appl Polym Sci 107(6):3442–3450. CrossRefGoogle Scholar
  5. Buzarovska A, Grozdanov A (2012) Biodegradable poly(L-lactic acid)/TiO2 nanocomposites: thermal properties and degradation. J Appl Polym Sci 123(4):2187–2193. CrossRefGoogle Scholar
  6. Buzarovska A, Gualandi C, Parrilli A, Scandola M (2015) Effect of TiO2 nanoparticle loading on poly(l-lactic acid) porous scaffolds fabricated by TIPS. Compos Part B 81:189–195. CrossRefGoogle Scholar
  7. Chawengkijwanich C, Hayata Y (2008) Development of TiO2 powder-coated food packaging film and its ability to inactivate Escherichia coli in vitro and in actual tests. Int J Food Microbiol 123:288–292. CrossRefGoogle Scholar
  8. Chua S-C, Xu X, Guo Z (2012) Emerging sustainable technology for epoxidation directed toward plant oil-based plasticizers. Process Biochem 47(10):1439–1451. CrossRefGoogle Scholar
  9. Devanand Venkatasubbu G, Ramasamy S, Ramakrishnan V, Kumar J (2013) Folate targeted PEGylated titanium dioxide nanoparticles as a nanocarrier for targeted paclitaxel drug delivery. Adv Powder Technol 24(6):947–954. CrossRefGoogle Scholar
  10. Fischer K, Grimm M, Meyers J, Dietrich C, Gläser R, Schulze A (2015) Photoactive microfiltration membranes via directed synthesis of TiO2 nanoparticles on the polymer surface for removal of drugs from water. J Membr Sci 478:49–57. CrossRefGoogle Scholar
  11. Fukushima K, Abbate C, Tabuani D, Gennari M, Camino G (2009) Biodegradation of poly(lactic acid) and its nanocomposites. Polym Degrad Stab 94(10):1646–1655. CrossRefGoogle Scholar
  12. Gianotti E, Bisio C, Marchese L, Guidotti M, Ravasio N, Psaro R, Coluccia S (2007) Ti(IV) catalytic centers grafted on different siliceous materials: spectroscopic and catalytic study. J Phys Chem C 111(13):5083–5089. CrossRefGoogle Scholar
  13. Guidotti M, Ravasio N, Psaro R, Gianotti E, Coluccia S, Marchese L (2006) Epoxidation of unsaturated FAMEs obtained from vegetable source over Ti(IV)-grafted silica catalysts: a comparison between ordered and non-ordered mesoporous materials. J Mol Catal A Chem 250(1–2):218–225. CrossRefGoogle Scholar
  14. Gupta KK, Mishra PK, Srivastava P, Gangwar M, Nath G, Maiti P (2013) Hydrothermal in situ preparation of TiO2 particles onto poly(lactic acid) electrospun nanofibres. Appl Surf Sci 264:375–382. CrossRefGoogle Scholar
  15. Hong Y, Li Y, Zhuang X, Chen X, Jing X (2009) Electrospinning of multicomponent ultrathin fibrous nonwovens for semi-occlusive wound dressings. J Biomed Mater Res A 89A(2):345–354. CrossRefGoogle Scholar
  16. Kale G, Auras R, Singh SP, Narayan R (2007) Biodegradability of polylactide bottles in real and simulated composting conditions. Polym Test 26(8):1049–1061. CrossRefGoogle Scholar
  17. Kumar D, Ali A (2012) Ti/SiO2 as a nanosized solid catalyst for the epoxidation of fatty acid methyl esters and triglycerides. Energy Fuel 26(5):2953–2961. CrossRefGoogle Scholar
  18. Lin W-C, Yang W-D, Jheng S-Y (2012) Photocatalytic degradation of dyes in water using porous nanocrystalline titanium dioxide. J Taiwan Inst Chem Eng 43:269–274. CrossRefGoogle Scholar
  19. Luo Y-B, Wang X-L, Wang Y-Z (2012) Effect of TiO2 nanoparticles on the long-term hydrolytic degradation behavior of PLA. Polym Degrad Stab 97(5):721–728. CrossRefGoogle Scholar
  20. Mekonnen T, Mussone P, Khalil H, Bressler D (2013) Progress in bio-based plastics and plasticizing modifications. J Mater Chem A 1(43):13379. CrossRefGoogle Scholar
  21. Naghibi S, Hosseini HRM, Sani MAF, Shokrgozar MA, Mehrjoo M (2014) Mortality response of folate receptor-activated, PEG-functionalized TiO2 nanoparticles for doxorubicin loading with and without ultraviolet irradiation. Ceram Int 40:5481–5488. CrossRefGoogle Scholar
  22. Nakayama N, Hayashi T (2007) Preparation and characterization of poly(l-lactic acid)/TiO2 nanoparticle nanocomposite films with high transparency and efficient photodegradability. Polym Degrad Stab 92(7):1255–1264. CrossRefGoogle Scholar
  23. Opaprakasit P, Opaprakasit M, Tangboriboonrat P (2007) Crystallization of polylactide and its stereocomplex investigated by two-dimensional Fourier transform infrared correlation spectroscopy employing carbonyl overtones. Appl Spectrosc 61(12):1352–1358Google Scholar
  24. Pourali, A. R., & Ghanei, M. (2006). Efficient epoxidation of α,β-enones with polyvinylpyrrolidone supported hydrogen peroxide (PVP-H2O2). Bull Korean Chem Soc 27(10)Google Scholar
  25. Rios L, Weckes P, Schuster H, Hoelderich W (2005) Mesoporous and amorphous Ti–silicas on the epoxidation of vegetable oils. J Catal 232(1):19–26. CrossRefGoogle Scholar
  26. Saithai P, Lecomte J, Dubreucq E, Tanrattanakul V (2013) Effects of different epoxidation methods of soybean oil on the characteristics of acrylated epoxidized soybean oil-co-poly(methyl methacrylate) copolymer. Express Polym Lett 7(11):910–924. CrossRefGoogle Scholar
  27. Sharifah Nafisah SI, Ahmad Faiza M, Rahmah M, Firdaus Y, Roslinda F, Dzaraini K (2013) Epoxidation of palm oil catalyzed by titanium-grafted silica catalyst. Adv Mater Res 812:30–37. CrossRefGoogle Scholar
  28. Shimamoto GG, Favaro MMA, Tubino M (2015) Simple Methods via mid-IR or 1H NMR spectroscopy for the determination of the iodine value of vegetable oils. J Braz Chem Soc 26(7):1431–1437.
  29. Silva KIMD, Fernandes JA, Kohlrausch EC, Dupont J, Santos MJL, Gil MP (2014) Structural stability of photodegradable poly(l-lactic acid)/PE/TiO2 nanocomposites through TiO2 nanospheres and TiO2 nanotubes incorporation. Polym Bull 71(5):1205–1217. CrossRefGoogle Scholar
  30. Silvestre-Alberó J, Domine ME, Jordá JL, Navarro MT, Rey F, Rodríguez-Reinoso F, Corma A (2015) Spectroscopic, calorimetric, and catalytic evidences of hydrophobicity on Ti-MCM-41 silylated materials for olefin epoxidations. Appl Catal A Gen 507:14–25. CrossRefGoogle Scholar
  31. Sriromreun P, Petchsuk A, Opaprakasit M, Opaprakasit P (2013) Standard methods for characterizations of structure and hydrolytic degradation of aliphatic/aromatic copolyesters. Polym Degrad Stab 98(1):169–176. CrossRefGoogle Scholar
  32. Taghizadeh MT (2008) Stabilizing effect of epoxidized sunflower oil as a secondary stabilizer for Ca/Hg stabilized PVC. Express Polym Lett 2(1):65–76. CrossRefGoogle Scholar
  33. Tan SG, Chow WS (2010) Biobased epoxidized vegetable oils and its greener epoxy blends: a review. Polym-Plast Technol Eng 49(15):1581–1590. CrossRefGoogle Scholar
  34. Wang T, Jiang H, Wan L, Zhao Q, Jiang T, Wang B, Wang S (2015) Potential application of functional porous TiO2 nanoparticles in light-controlled drug release and targeted drug delivery. Acta Biomater 13:354–363. CrossRefGoogle Scholar
  35. Xu J, Sun Y, Huang J, Chen C, Liu G, Jiang Y et al (2007) Photokilling cancer cells using highly cell-specific antibody-TiO2 bioconjugates and electroporation. Bioelectrochemistry 71(2):217–222. CrossRefGoogle Scholar
  36. Zakavi S, Abasi A, Pourali AR, & Rayati S (2008) Mn-porphyrin catalyzed epoxidation of alkenes with polyvinylpyrrolidone-supported H2O2. Bull. Korean Chem Soc 29(4)Google Scholar
  37. Zhuang W, Liu J, Zhang JH, Hu BX, Shen J (2009) Preparation, characterization, and properties of TiO2/PLA nanocomposites by in situ polymerization. Polym Compos 30(8):1074–1080. CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media B.V., part of Springer Nature 2018

Authors and Affiliations

  1. 1.School of Bio-Chemical Engineering and Technology, Sirindhorn International Institute of Technology (SIIT)Thammasat UniversityPathum ThaniThailand
  2. 2.National Metal and Materials Technology Center (MTEC)National Science and Technology Development AgencyPathum ThaniThailand

Personalised recommendations