Numerical analysis of catalytic efficiency of diesel exhaust purification based on multimedia aided regression model

  • Chunliang Lan
  • Zhiqin Cui
  • Tiexiong Su


Automotive diesel has become an international trend, and more and more attention has been paid to the purification of diesel engine. In the face of the European emission standards, we need to develop emission control technologies applicable to high standards. Outside purification is the key to this technology. In this paper, the technology of diesel engine purification outside and outside of China is analyzed. The principle, characteristics, treatment effect and application prospect of various methods are analyzed. In this paper, the process and influence of the tail gas production in diesel engine fuel combustion are expounded. The chemical characteristics and chemical reaction equations of harmful tail gas, the emission hazard of diesel engine and the method and significance of exhaust gas treatment are listed. With the continuous development of multimedia technology, multimedia teaching plays a more and more important role in the field of modern teaching. At the same time, multimedia teaching is a breakthrough in the traditional backward teaching mode. Multimedia assisted instruction is widely used all over the world, and it also faces many problems caused by improper use while improving students’ academic achievements. Multimedia assisted and regression models are adopted in this paper.


Efficiency numerical analysis Multimedia assisted regression model Diesel engine Exhaust gas treatment and purification 


  1. 1.
    Govender S, Friedrich HB (2017) Monoliths: a review of the basics, preparation methods and their relevance to oxidation. Catalysts 7(2):62CrossRefGoogle Scholar
  2. 2.
    Han CB et al (2015) Removal of particulate matter emissions from a vehicle using a self-powered triboelectric filter. ACS Nano 9(12):12552–12561CrossRefGoogle Scholar
  3. 3.
    Hasan MM, Rahman MM (2016) Homogeneous charge compression ignition combustion: advantages over compression ignition combustion, challenges and solutions. Renew Sust Energ Rev 57:282–291CrossRefGoogle Scholar
  4. 4.
    Hegner R, Atakan B (2017) A polygeneration process concept for HCCI-engines–modeling product gas purification and exergy losses. Int J Hydrog Energy 42(2):1287–1297CrossRefGoogle Scholar
  5. 5.
    Jinke G, Chan T, Shuhui W, Tao C, Qingsong Z, Qingwu G, Hengyu L (2013) Grey relational analysis on influencing factors of muffling characteristic in a radial rotatable diesel particulate filter. Chinese Journal of Environmental Engineering 2:043Google Scholar
  6. 6.
    Lee J, Min K (2014) A study of the fouling characteristics of EGR coolers in diesel engines. J Mech Sci Technol 28.8:3395–3401CrossRefGoogle Scholar
  7. 7.
    Li L, et al. (2017) "Self-propagated flaming synthesis of highly active layered CuO-δ-MnO2 hybrid composites for catalytic total oxidation of toluene pollutant." ACS Applied Materials & InterfacesGoogle Scholar
  8. 8.
    Liu S et al (2016) Design and performance test of one-body purification muffler of single cylinder diesel engine. Transactions of the Chinese society of Agricultural Engineering 32.9:60–66Google Scholar
  9. 9.
    Liu H, Wang Z, Zhang J, Wang J, Shuai S (2017) Study on combustion and emission characteristics of polyoxymethylene dimethyl ethers/diesel blends in light-duty and heavy-duty diesel engines. Appl Energy 185:1393–1402CrossRefGoogle Scholar
  10. 10.
    Omraei M, Sheibani S, Sadrameli SM, Towfighi J (2013) Preparation of biodiesel using KOH-MWCNT catalysts: an optimization study. Ind Eng Chem Res 52(5):1829–1835CrossRefGoogle Scholar
  11. 11.
    Pisarenko EV, Pisarenko VN (2014) Modeling the low-temperature synthesis of dimethyl ether from methanol. Theor Found Chem Eng 48(3):249–253CrossRefGoogle Scholar
  12. 12.
    Vojtisek-Lom M et al (2015) Polycyclic aromatic hydrocarbons (PAH) and their genotoxicity in exhaust emissions from a diesel engine during extended low-load operation on diesel and biodiesel fuels. Atmos Environ 109:9–18CrossRefGoogle Scholar
  13. 13.
    Zhang G-j et al (2015) Numerical simulation on trapping efficiency of steady filtration process in diesel particulate filter and its experimental verification. J Cent South Univ 22(11):4456–4466CrossRefGoogle Scholar
  14. 14.
    Zhao F-q, Shou-cheng LI, Shi Y (2013) Research of oxygen sensor position by CFD numerical simulation. Machinery 1:012Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.North University of ChinaTaiyuanChina

Personalised recommendations