Advertisement

Metal Science and Heat Treatment

, Volume 59, Issue 11–12, pp 709–714 | Cite as

Crystal Geometry Parameters of Structural Components of Various Titanium Alloys

  • V. P. Leonov
  • I. R. Kozlova
  • S. N. Petrov
  • A. V. Ptashnik
TITANIUM ALLOYS

The orientation characteristics of structural components of titanium alloys with different types of structure determined by the method of EBSD analysis are shown to be interrelated with the deformation mechanism determining the properties of polycrystalline materials.

Key words

titanium alloys structure properties crystallographic analysis 

References

  1. 1.
    M. I. Brun and G. V. Shakanova, “About the structure of titanium alloys and parameters determining its variety,” Titan, No. 1, 24 – 29 (1003).Google Scholar
  2. 2.
    V. K. Aleksandrov, N. F. Anoshkin, A. P. Belozerov, et al., Semiproducts from Titanium Alloys [in Russian], Metallurgiya, Moscow (1979), 512 p.; 2nd ed., VILS, Moscow (1996), 581 p.Google Scholar
  3. 3.
    E. V. Nesterova, V. V. Rybin, and V. V. Obukhovskii, “Special features of lamellar structure of low-alloy pseudo-alpha titanium alloys,” Fiz. Met. Metalloved., 48(3), 563 – 574 (1979).Google Scholar
  4. 4.
    V. V. Rybin, High Plastic Deformations and Fracture of Metals [in Russian], Metallurgiya, Moscow (1986), 224 p.Google Scholar
  5. 5.
    W. G. Burgers, “On the process of transition of the cubic-body-centered modification into the hexagonal-closepacked modification of zirconium,” Physica, 1(7 – 8), 561 – 586 (1934).CrossRefGoogle Scholar
  6. 6.
    V. V. Voronina and V. V. Rybin, “A study of the method of orientation matrices in electron microscope analysis of composite structures,” in: Abs. Rep. X All-Union Conf. on Electron Microscopy, Tashkent, 5 – 8 Oct., 1976 [in Russian] (1976), Vol. 1, pp. 203 – 205.Google Scholar
  7. 7.
    S. M. C. van Bohemen, A. Kamp, R. H. Penrov, et al., “Nucleation and variant selection of secondary α plates in β titanium alloys,” Acta Mater., 56(20), 5907 – 5914 (2008).CrossRefGoogle Scholar
  8. 8.
    S. Mironov, Y. Zhang, Y. S. Sato, and H. Kokawa, “Crystallography of transformed beta microstructure in friction stir welded Ti – 6Al – 4V alloy,” Scr. Mater., 59, 511 – 514 (2008).CrossRefGoogle Scholar
  9. 9.
    Gur’ev, L. V. Kuksa, and Yu. D. Khesin, “A study of the microscopic features of deformation of real alloys,” Izv. Akad. Nauk SSSR, Metally, No. 2, 122 – 129 (1967).Google Scholar
  10. 10.
    B. B. Chechulin and Yu. D. Khesin, Cyclic and Corrosion Strength of Titanium Alloys [in Russian], Metallurgiya, Moscow (1987), 207 p.Google Scholar
  11. 11.
    L. S. Moroz, Yu. D. Khesin, and O. S. Belova, “Structure and mechanical properties of low-alloy titanium alloys,” Metalloved. Term. Obrab. Met., No. 2, 17 – 23 (1963).Google Scholar
  12. 12.
    N. Z. Pertsovskii, G. V. Shakhanova, and M. Ya. Brun, “Special features of deformation and ductility of double-phase titanium alloys with lamellar structure,” Fiz. Met. Metalloved., 36(1), 154 – 161 (1973).Google Scholar
  13. 13.
    N. Z. Pertsovskii, M. Ya. Brun, and G. V. Shakhanova, “About the nature of embrittlement of double-phase titanium alloys with coarse lamellar structure,” Fiz. Met. Metalloved., 30(5), 1047 – 1054 (1970).Google Scholar
  14. 14.
    N. Z. Pertsovskii, G. V. Shakhanova, M. Ya. Brun, and B. A. Notkin, “About the effect of beta-phase on the ductility of double-phase titanium alloys,” Fiz. Met. Metalloved., 22(4), 887 – 890 (1972).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • V. P. Leonov
    • 1
  • I. R. Kozlova
    • 1
  • S. N. Petrov
    • 1
  • A. V. Ptashnik
    • 1
  1. 1.National Research Center “Kurchatov Institute” – Central Research Institute of Structural Materials “Prometey” (CRISM “Prometey”)St. PetersburgRussia

Personalised recommendations