Advertisement

Metal Science and Heat Treatment

, Volume 59, Issue 11–12, pp 682–688 | Cite as

Effect of the Rate of Hot Compressive Deformation on the Kinetics of Dynamic and Static Recrystallization of Novel Medium-Carbon Medium-Alloy Steel

  • E. I. Khlusova
  • A. A. Zisman
  • T. V. Knyazyuk
  • N. N. Novoskol’tsev
STRUCTURAL STEELS

Dynamic and static recrystallization occurring under hot deformation at a rate of 1 and 100 sec – 1 in high-strength medium-carbon wear-resistant steels developed at CRISM “Prometey” for die forming of parts of driven elements of tillage machines is studied. The critical strain of dynamic recrystallization and the threshold temperatures and times of finish of static recrystallization are determined for the studied deformation rates at various temperatures.

Key words

recrystallization deformation rate medium-carbon steel die forming 

Notes

The work has been performed with financial support of the Ministry of Education and Science of the RF within Subsidy Agreement No. 14.579.21.0003 (the Unique Project Identifier is RFMEFI 57914X0003).

The authors work at the “Kurchatov Institute” – CRISM “Prometey” Research Center and are performers of the Project

References

  1. 1.
    C. Garcia-Mateo, B. Lopez, J. M. Rodriguez-Ibabe, “Static recrystallization kinetics in warm worked vanadium microalloyed steels,” Mater. Sci. Eng., A303, 216 – 225 (2001).CrossRefGoogle Scholar
  2. 2.
    L. Backe, “Modelling the effect of solute drag on recovery and recrystallization during hot deformation of Nb microalloyed steels,” ISIJ Int., 50(2), 239 – 247 (2010).CrossRefGoogle Scholar
  3. 3.
    A. I. Fernandez, P. Uranga, B. Lopez, and J. M. Rodriguez-Ibabe, “Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb-Ti microalloyed steels,” Mater. Sci. Eng., A361, 367 – 376 (2003).CrossRefGoogle Scholar
  4. 4.
    C. L. Miao, C. J. Shang, G. D. Zhang, and S. V. Subramanian, “Recrystallization and strain accumulation behaviors of high NB-bearing line pipe steel in plate and strip rolling,” Mater. Sci. Eng., A527, 4985 – 4992, (2010).CrossRefGoogle Scholar
  5. 5.
    V. V. Ryabov, E. I. Khlusova, S. A. Golosienko, and G. D. Motovilina, “New steels for agricultural machine building,” Metallurg, No. 6, 59 – 65 (2015).Google Scholar
  6. 6.
    A. A. Zisman, T. V. Shoshina, and E. I. Khlusova, “A study of recrystallization the of austenite of steel 09KhN2MD under the conditions of hot rolling by the method of stress relaxation,” Vopr. Materialoved., No. 2(70), 16 – 24 (2012).Google Scholar
  7. 7.
    A. A. Zisman, T. V. Soshina, and E. I. Khlusova, “Plotting and application of maps of structural changes under hot deformation of the austenite of steel 09KhN2MDF for optimizing industrial processes,” Vopr. Materialoved., No. 1(73), 37 – 48 (2013).Google Scholar
  8. 8.
    J. S. Perttula and L. P. Karjalainen, “Recrystallization rates in austenite measured by double-compression and stress relaxation methods,” Mater. Sci. Technol., 14(7), 626 – 630 (1998).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • E. I. Khlusova
    • 1
  • A. A. Zisman
    • 1
  • T. V. Knyazyuk
    • 1
  • N. N. Novoskol’tsev
    • 1
  1. 1.Central Research Institute of Structural Materials “Prometey” (CRISM “Prometey”)St. PetersburgRussia

Personalised recommendations