The effect of heat treatment parameters on the properties and structural and phase composition of a promising die steel 70Kh3G2FTR for hot deformation is studied. The temperature-and-stress state of a hammer die under a heat treatment is simulated.
Similar content being viewed by others
References
B. B. Vinokur and V. L. Pilyushenko, Strength and Brittleness of Structural Alloy Steel [in Russian], Naukova Dumka, Kiev (1983), 283 p.
B. B. Vinokur and V. L. Pilyushenko, Hardenability of Structural Steels [in Russian], Naukova Dumka, Kiev (1970), 108 p.
S. E. Krylova, V. I. Gryzunov, and V. A. Lysov, “Application of the method of collocation of priorities for synthesizing alloys with optimum wear resistance,” in: Proc. Int. Sci. Conf. “Innovation Activity of Enterprises in Research, Treatment and Manufacturing of Advanced Structural Materials and Alloys” [in Russian], Mashinostroenie, Moscow (2009), pp. 370 – 380.
S. E. Krylova (Svoikina), E. V. Bratkovskii, and O. V. Samokhina, “About the problem of searching for an advanced process of development of impact-abrasive steels,” in: Proc. of Dept. “Materials Science and Technology of Metals” [in Russian], Izd. OGTI, Orsk (2004), pp. 129 – 138.
S. V. Kamantsev, Tool Steel for Hot Deformation, RF Patent 2535148, MPK C22 C 38/38, Appl. Patentee: ORMETO-YuUMZ Machine Building Group, No. 2013100389/02 [in Russian], Appl. 09.01.2013, Publ. 10.12.2014.
S. E. Krylova, N. Yu. Tryakina, E. Yu. Priymak, et al., “Rationalization of heat treatment parameters for steel 70Kh3G2VTB on the basis of a study of the phase composition,” Metalloved. Term. Obrab. Met., No. 1, 19 (2013).
S. E. Krylova, S. M. Antonov, A. M. Akhmed’yanov, et al., “Kinetics of decomposition of supercooled austenite in experimental sparingly alloyed tool steels under continuous cooling,” Vest. Yuzh.-Ural. Gos. Univer., Ser. Metallurgiya, 19[39(298)], 79 – 84 (2012).
S. E. Krylova, I. L. Yakovleva, N. A. Tereshchenko, et al., “Effect of the kinetics of decomposition of austenite on structure formation in sparingly alloyed tool steel,” Fiz. Met. Metalloved., 10(10), 296 – 936 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 10, pp. 4 – 10, October, 2017.
Rights and permissions
About this article
Cite this article
Krylova, S.E., Kletsova, O.A., Gryzunov, V.I. et al. Effect of Heat Treatment on the Structure and Properties of Die Steel 70Kh3G2FTR. Met Sci Heat Treat 59, 609–614 (2018). https://doi.org/10.1007/s11041-018-0198-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-018-0198-1