Advertisement

Metal Science and Heat Treatment

, Volume 58, Issue 3–4, pp 147–152 | Cite as

Estimation of the Quality of Gas Laser Sawing of Sheets of Aluminum Alloys

  • R. A. Fizulakov
  • V. I. Murav’ev
  • V. S. Pitsyk
Article
  • 26 Downloads

The effect of gas laser sawing on the properties of the cut edges of aluminum alloys is studied. Recommendations on application of gas laser sawing are developed. The main criteria for estimating the optimum speed of gas laser sawing of aluminum alloys are determined.

Key words

gas laser sawing aluminum alloys surface roughness flash microstructure heat-affected zone 

References

  1. 1.
    A. G. Grigor’yants and A. A. Sokolov, Laser Engineering and Technology, Book 7. Laser Cutting of Metals [in Russian], Vysshaya Shkola (1988), 127 p.Google Scholar
  2. 2.
    N. N. Rykalin, A. A. Uglov, and A. N. Kokorin, Laser Treatment of Materials [in Russian], Mashinostroenie, Moscow (1975), 296 p.Google Scholar
  3. 3.
    A. G. Grigor’yants, I. N. Shiganov, and A. I. Misyurov, Technological Processes of Laser Treatment [in Russian], Izd. MGTU Im. N. E. Baumana, Moscow (2006), 644 p.Google Scholar
  4. 4.
    A. A. Vedenov and G. G. Gladush, Physical Processes in Laser Treatment of Materials [in Russian], Energoatomizdat, Moscow (1985), 125 p.Google Scholar
  5. 5.
    V. V. Blinkov, M. P. Gryaznov, A. N. Loginov, et al., “Development and study of the technological process of laser cutting for making parts from aluminum alloys,” Aviats. Prom.-st’, No. 11, 40 – 42 (1989).Google Scholar
  6. 6.
    V. I. Murav’ev, R. A. Fizulakov, and A. F. Mel’nichuk, “A study of the effect of gas laser sawing on the formation of relief, structure and chemical composition of the surface of cuts of titanium preforms,” Metalloved. Term. Obrab. Met., No. 2, 22 – 25 (2005).Google Scholar
  7. 7.
    V. I. Murav’ev and R. A. Fizulakov, “Structural changes in the surface layer of titanium alloys under gas laser sawing,” Uchen. Zapiski GOUVPO “KnAGTU, No. II-1(2), 133 – 144 (2010).Google Scholar

Copyright information

© Springer Science+Business Media New York 2016

Authors and Affiliations

  • R. A. Fizulakov
    • 1
  • V. I. Murav’ev
    • 1
  • V. S. Pitsyk
    • 1
  1. 1.Komsomolsk-on-Amur State Technical UniversityKomsomolsk-on-AmurRussia

Personalised recommendations