Metal Science and Heat Treatment

, Volume 54, Issue 1–2, pp 75–79 | Cite as

Effect of heat treatment on the structure and properties of aluminum alloy AV

  • M. A. Gureeva
  • O. E. Grushko

Commercial cold-rolled sheets of aluminum alloy AV are studied. The properties of the sheets are considered after hardening and aging by different regimes. The conditions for obtaining sheets from alloy AV with controllable fine-grained recrystallized structure are determined.

Key words

alloys of the Al Mg Si system, cold-rolled sheets, grain size, controllable structure, thermomechanical treatment, artificial aging, mechanical properties, cold forming 


  1. 1.
    I. N. Fridlyander, Aluminum Deformable Structural Alloys [in Russian], Metallurgiya, Moscow (1979), 208 p.Google Scholar
  2. 2.
    I. N. Fridlyander, V. G. Sister, O. E. Grushko, and L. M. Sheveleva, “Aluminum alloys: promising materials for auto making,” Metalloved. Term. Obrab. Met., No. 9, 3–9 (2002).Google Scholar
  3. 3.
    N. I. Grishechkin and E. E. Kovtaev, “Use of aluminum and titanium alloys in auto making,” Tsvetn. Met., No. 2, 58–60 (1997).Google Scholar
  4. 4.
    A. Yu. Averkiev, Methods for Estimating the Formability of Sheet Metal [in Russian], Mashinostroenie, Moscow (1975), 175 p.Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2012

Authors and Affiliations

  1. 1.Moscow State Industrial UniversityMoscowRussia
  2. 2.All-Russia Research Institute for Aircraft Materials (FGUP VIAM)MoscowRussia

Personalised recommendations