Advertisement

Metal Science and Heat Treatment

, Volume 54, Issue 1–2, pp 70–74 | Cite as

Effect of liquid-phase hot isostatic pressing on the properties of cast aluminum alloys. Part 2. Structure and properties of alloy AA356.02 obtained by casting into sand molds by the Disamatic process

  • D. V. Tagirov
  • E. V. Ivanova
  • R. O. Kaibyshev
Article

The effect of liquid-phase hot isostatic pressing (LHIP) on the structure and mechanical properties of cast aluminum alloy AA356.02 obtained by casting into sand molds by a recent variant of the Disamatic process is considered. It is shown that treatment by the method of LHIP raises the endurance limit of the alloy σ–1 = 140 MPa.

Key words

aluminum alloys casting pressing mechanical properties structure 

References

  1. 1.
    E. B. Ivanova, D. V. Tagirov, and R. O. Kaibyshev, “Effect of liquid-phase hot isostatic pressing on the properties of cast aluminum alloys. Part 1. Structure and properties of alloy AK7ch obtained by casting into sand molds,” Metalloved. Term. Obrab. Met., No. 2, 11–17 (2012).Google Scholar
  2. 2.
    “Metallic materials and elements for aerospace vehicle structures,” in: Cast Aluminum Alloys, MIL-HandBook-5H (1998), pp. 3-462–3-505.Google Scholar
  3. 3.
    J. C. Kaufman, “Aluminum alloys,” in: Myer Kutz (ed.), Handbook of Materials Selection, John Wiley & Sons, Inc., New York (2002), Chap. 4, pp. 88–34.Google Scholar
  4. 4.
    K. S. Chernyavskii, Stereology in Metals Science [in Russian], Moscow (1977), 280 p.Google Scholar
  5. 5.
    R. Kaibyshev, F. Musin, D. Gromov, et al., “Grain refinement and superplastic behavior of a modified 606 aluminum alloy,” Mater. Sci. Technol., 19, 483–490 (2003).CrossRefGoogle Scholar
  6. 6.
    C. Park, S. Kim, Y. Kwon, Y. Lee, and J. Lee, “Mechanical and corrosion properties of rheocast and low-pressure cast A356-T6 alloy,” Mater. Sci. Eng., A391, 86–94 (2007).Google Scholar
  7. 7.
    E. Freitas, M. Ferrante, C. T. Ruckert, and W. W. Bose Filho, “Thixocasting of an A356 alloy: fluidity, porosity distribution and thermomechanical fatigue behavior,” Mater. Sci. Eng., A479, 171–180 (2008).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2012

Authors and Affiliations

  • D. V. Tagirov
    • 1
  • E. V. Ivanova
    • 1
  • R. O. Kaibyshev
    • 1
  1. 1.Belgorod State UniversityBelgorodRussia

Personalised recommendations