Advertisement

Metal Science and Heat Treatment

, Volume 53, Issue 5–6, pp 304–307 | Cite as

Influence of dose build-up rate with irradiation by manganese ions on the composition of the surface layers and mechanical properties of carbon steel

  • P. V. Bykov
  • V. L. Vorob’ev
  • V. Ya. Bayankin
  • S. N. Korshunov
Technical Information
  • 37 Downloads

The influence of irradiation by manganese ions with energy 45 keV and dose 5 × 1016 ion/cm2 and dose build-up rate 10 – 50 μA/cm2 on the composition of the surface layers and morphology of the surface and mechanical properties of carbon steel St3sp is investigated. Achange in the micro-hardness and fatigue resistance as a function of the dose build-up rate and smoothing of the surface under the effect of ion bombardment are established.

Key words

ion implantation irradiation parameters carbon steel mechanical properties of steel fractographic analysis 

Notes

The present study was completed with the financial support of Program No.09-P-2-1026 of the Presidium of the Russian Academy of Sciences.

References

  1. 1.
    E. V. Legostaeva and Yu. P. Sharkeev, “Laws and mechanisms of wear of ferrite-pearlite steel implanted by molybdenum ions,” Trenie Iznos, 23(5), 529 – 536 (2002).Google Scholar
  2. 2.
    V. I. Lavrent’ev and A. D. Pogrebnyak, “Effect of ion beans on iron and steel,” Metallofiz. Noveishie Tekhnol., 18(11), 18 – 39 (1996).Google Scholar
  3. 3.
    N. V. Pleshivtsev and E. A. Krasikov, “Protection of metals, alloys, and steels by ion bombardment (survey),” Metally, No. 4, 98 – 129 (1995).Google Scholar
  4. 4.
    I. G. Romanov, A. I. Ryabchikov, I. N. Tsareva, et al., “On surface hardening of instrument steels by means of continuous and pulse ion fluxes,” Metally, No. 3, 113 – 121 (1993).Google Scholar
  5. 5.
    A. N. Didenko, V. A. Shulov, G. E. Remnev, et al., “Physicochemical state of surface layers and functional properties of alloy VT18U that has been subjected to the action of a powerful ion beam,” Fiz. Khim. Obrab. Mater., No. 5, 14 – 23 (1991).Google Scholar
  6. 6.
    F. F. Komarov, Ion Implantation in Metals [in Russian], Metallurgiya, Moscow (1990), 216 p.Google Scholar
  7. 7.
    T. D. Radzhabov and A. S. Bagdasaryan, “Variation of surface micro-hardness and wear resistance of titanium alloy as a result of ion nitration,” Poverkhnost’. Fiz., Khim., Mekhanika, No. 11, 104 – 111 (1986).Google Scholar
  8. 8.
    J. Bourke and F. Weiss (eds.), Surface Treatment and the Reliability of Materials [Russian translation], Mir, Moscow (1984), 192 p.Google Scholar
  9. 9.
    R. M. Berisha, Sputtering of Solids by Ion Bombardment, Issue II: Sputtering of Alloys and Compounds. Sputtering under the Effect of Electrons and Neutrons. Surface Relief [Russian translation], Mir, Moscow (1986), 488 p.Google Scholar
  10. 10.
    L. D. Oleynikova, Units of Physical Quantities in Power Engineering [in Russian], Énergoatomizdat, Moscow (1983), 232 p.Google Scholar
  11. 11.
    A. V. Nikitin, M. A. Baranov, E. A. Serebryannikkov, and V. Ya. Bayankin, “Influence of dose build-up rate with irradiation by ions of metalloids on the composition, structure, and properties of a Fe – Cr matrix,” Fiz. Khim. Obrab. Mater., No. 3, 5 – 8 (2002).Google Scholar
  12. 12.
    A. P. Gulyaev, Materials Science [in Russian], Metallurgiya, Moscow (1977), 648 p.Google Scholar

Copyright information

©  Springer Science+Business Media, Inc. 2011

Authors and Affiliations

  • P. V. Bykov
    • 1
  • V. L. Vorob’ev
    • 1
  • V. Ya. Bayankin
    • 1
  • S. N. Korshunov
    • 2
  1. 1.Physico-Technical Institute, Russian Academy of Sciences (Ural Division)IzhevskRussia
  2. 2.Kurchatov Institute Russian Scientific CenterMoscowRussia

Personalised recommendations