Properties of oxygen-free copper with a microadditive of yttrium and without it are studied after vacuum induction remelting. The ingots are subjected to intense hot pressing and subsequent rolling to various degrees of reduction. The effects of the annealing temperature on the structure and of the anisotropy of the structure on the strength properties of the copper are determined. The properties of copper with an additive of yttrium and without it are compared.
Similar content being viewed by others
References
I. V. Gorynin, V. A. Glukhikh, V. V. Rybin, et al., “Structural materials of the first wall, the blanket, and the divertor developed for designing ITER,” in: Proc. II Int. Conf. “Radiation Effect on Materials of Thermonuclear Reactors [in Russian], St. Petersburg (1992), Part 1, p. 4.
L. I. Ivanov, V. I. Lazarenko, and Yu. M. Platov, “Radiation resistance of alloys of the Al – Mg – Sc system,” Fiz. Khim. Obrab. Mater., No. 6, 9 – 11 (1989).
V. F. Zelenskii and I. M. Neklyudov, “Effect of REE on the radiation resistance of materials,” in: The Science of the Radiation Materials [in Russian], Izd. KhFTI, Kharkov(1990), Vol. 2, pp. 45 – 57.
I. F. Eshby, The Physics of Strength and Plasticity [in Russian], Metallurgiya, Moscow (1972), p. 88.
P. Coulomb and J. Friedel, Formation of Caverns on Dislocations. Dislocations and Mechanical Properties of Crystals [Russian translation], Inostr. Lit., Moscow (1966), 366 p.
N. V. Kamyshanchenko, Creation of Hardened State in Metals by Programmed Thermomechanical Action, Author’s Abstract of Doctoral’s Thesis [in Russian], LPI, Leningrad (1991), p. 340.
L. M. Vorontsova and L. P. Seleznev, “Effect of REM on the properties of copper,” Metalloved. Term. Obrab. Met., No. 3, 41 (1977).
V. N. Fedorova and A. A. Zhurba, “Effect of yttrium on the properties of copper,” Izv. Akad. Nauk SSSR, Met., No. 1, 166 (1975).
A. V. Burov, Casting of Ingots from Copper and Copper Alloys [in Russian], Metallurgiya, Moscow (1972), p. 76.
V. V. Zhelobov and G. I. Zverev, Pressing of Metals [in Russian], Metallurgiya, Moscow (1971), 320 p.
O. Kubashewski and B. Hopkins, Oxidation of Metals and Alloys [Russian translation], Metallurgiya, Moscow (1965), 428 p.
R. Honeycomb, Plastic Deformation of Metals [Russian translation], Mir, Moscow (1972), 408 p.
H. Wasserman and J. Graven, Texture of Metallic Materials [Russian translation], Metallurgiya, Moscow (1969), 654 p.
P. G. Miklyaev and Ya. B. Fridman, Anisotropy of Mechanical Properties of Metals [in Russian], Metallurgiya, Moscow (1986), 224 p.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 26 – 33, December, 2010.
Rights and permissions
About this article
Cite this article
Kamyshanchenko, N.V., Galtsev, A.V., Durykhin, M.I. et al. Special features of changes in the structure and mechanical properties of oxygen-free pure and yttrium-alloyed copper after vacuum induction remelting. Met Sci Heat Treat 52, 600–607 (2011). https://doi.org/10.1007/s11041-011-9327-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-011-9327-9