The department of metals science and heat treatment of the Perm State Engineering University actively works on the problem of dispersion of low-carbon martensitic steels with ultrafine grains and a nanometric size of the characteristic element of structure. It is shown that the highest efficiency of nitriding of this group of steels is attained when the formed structure has a high density of phase boundaries and an elevated content of imperfections of the crystal structure.
Similar content being viewed by others
References
L. M. Kleiner and A. A. Shatsov, Novel Structural Materials: Low-Carbon Martensitic and Powder Steels. Applied Metals Science, A Study Aid [in Russian], Perm Gos. Tekh. Univ., Perm (2004), 142 p.
N. N. Mitrokhovich, Yu. N. Simonov, L. M. Kleiner, et al., Processibility and Structural Strength of Low-Carbon Steels with Martensitic Structure [in Russian], A Study Aid, Perm Gos. Tekh. Univ., Perm (2004), 123 p.
L. M. Kleiner, S. A. Kokovyakina, N. N. Mitrokhovich, et al., Ecologically Pure Processes for Manufacturing Heat-Hardened Semiproducts, Preforms, Parts, and Welded Structures [in Russian], A Study Aid, Perm Gos. Tekh. Univ., Perm (2000), 41 p.
Yu. M. Lakhtin and Ya. D. Kogan, Nitrided Steels [in Russian], Mashinostroenie, Moscow (1976), 256 p.
S. S. Yugai, L. M. Kleiner, and A. A. Shatsov, “Structure and properties of nitrided low-carbon martensitic steel 12Kh2G2NMFT,” Fiz. Met. Metalloved., 99(1), 110 – 115 (2005).
Yu. M. Lakhtin, Ya. D. Kogan, H. J. Spies, and Z. Bömer, The Theory and Technology of Nitriding [in Russian], Metallurgiya, Moscow (1991), 320 p.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 11, pp. 57 – 61, November, 2010.
Rights and permissions
About this article
Cite this article
Silina, O.V., Yugai, S.S. Effect of the size of austenite grains on the capacity of low-carbon martensitic steel 12Kh2G2NMFT for nitriding. Met Sci Heat Treat 52, 568–572 (2011). https://doi.org/10.1007/s11041-011-9321-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-011-9321-2