Advertisement

Metal Science and Heat Treatment

, Volume 48, Issue 5–6, pp 240–243 | Cite as

Structure and mechanical properties of alloys Ti-2.2% Al-2.2% V-2.2% Mo-2.5% Fe and Ti-2.2% Al-5% Fe equivalent to alloy VT16

  • B. A. Kolachev
  • V. N. Moiseev
  • D. V. Ryndenkov
  • F. S. Mamonova
  • E. N. Egorov
Titanium and its Alloys

Abstract

Comparative studies of the structure and properties of alloys Ti-2.2% Al-5% Fe and Ti-2.2% Al-2.2% V-2.2% Mo-2.5% Fe in annealed, quenched, and aged conditions are performed. The strength level of the alloys corresponds to that of VT16. The possibility of replacing alloy VT16 by alloy Ti-2.2% Al-2.2% V-2.2% Mo-2.5% Fe is estimated.

Keywords

Martensite Vanadium Ductility Molybdenum Titanium Alloy 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    I. S. Pol’kin, “Main directions of the development of titanium alloys,” in: Treatment of Titanium Alloys [in Russian], VILS, Moscow (1996), pp. 27–42.Google Scholar
  2. 2.
    V. L. Rodionov, T. V. Ishun’kina, V. N. Moiseev, et al., “A study of sparingly alloyed titanium alloys,” Tekhnol. Legk. Splav., No. 1, 59–62 (1997).Google Scholar
  3. 3.
    V. L. Rodionov, T. V. Ishun’kina, and V. N. Moiseev, “Prospects of development and use of α-titanium alloys,” Tekhnol. Legk. Splav., No. 3, 15–19 (1998).Google Scholar
  4. 4.
    V. A. Volodin, B. A. Kolachev, V. N. Moiseev, and D. V. Ryndenkov, “About the possibility of replacement of vanadium and molybdenum in alloy VT16 by iron,” Metalloved Term. Obrab. Met., No. 7, 13–16 (2001).Google Scholar
  5. 5.
    B. A. Kolachev, I. S. Pol’kin, and V. D. Talalaev, Titanium Alloys in Different Countries [in Russian], VILS, Moscow (2000).Google Scholar
  6. 6.
    V. A. Volodin, B. A. Kolachev, and D. V. Ryndenkov, “About the expediency of the introduction of strength equivalents with respect to aluminum and molybdenum in titanium alloys,” Izv. Vuzov, Tsvetn. Met., No. 1, 33–38 (2000).Google Scholar
  7. 7.
    B. A. Kolachev, V. I. Elagin, and V. A. Livanov, Physical Metallurgy and Heat Treatment of Nonferrous Metals and Alloys [in Russian], MISiS, Moscow (1999).Google Scholar
  8. 8.
    V. N. Moiseev, “Titanium and titanium alloys,” in: I. N. Fridlyander (ed.), Machine Building Encyclopedia, Vol. II-3: Nonferrous Metals and Alloys. Composite Materials [in Russian], Mashinostroenie, Moscow (2001), pp. 272–353.Google Scholar
  9. 9.
    V. N. Eremenko, Titanium and Its Alloys [in Russian], AN USSR, Kiev (1960).Google Scholar
  10. 10.
    B. A. Kolachev, R. M. Gabidullin, and Yu. V. Piguzov, Heat Treatment Technology of Nonferrous Metals and Alloys [in Russian], Metallurgiya, Moscow (1992).Google Scholar
  11. 11.
    V. A. Volodin, Titanium Alloys. Composition, Properties, Applications [in Russian], Volgo-Vyatskoe Izd., Nizhny Novgorod (1998).Google Scholar
  12. 12.
    V. A. Volodin, I. A. Vorob’ev, B. A. Kolachev, et al., The Process of Production of Titanium Fastening Parts [in Russian], Metallurgiya, Moscow (1996).Google Scholar
  13. 13.
    N. F. Anoshkin and M. Z. Ermanok (eds.), Semiproducts from Titanium Alloys [in Russian], Metallurgiya, Moscow (1996).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2006

Authors and Affiliations

  • B. A. Kolachev
    • 1
    • 2
  • V. N. Moiseev
    • 1
    • 2
  • D. V. Ryndenkov
    • 1
    • 2
  • F. S. Mamonova
    • 1
    • 2
  • E. N. Egorov
    • 1
    • 2
  1. 1.Stupino Branch of the Tsiolkovsky Russian State Engineering University (MATI)Stupino, Moscow RegionRussia
  2. 2.Stupino Metallurgical CompanyStupino, Moscow RegionRussia

Personalised recommendations