Metal Science and Heat Treatment

, Volume 48, Issue 3–4, pp 113–117 | Cite as

Effect of chemical composition and heat treatment on mechanical characteristics of microlayer composite materials of the Cu-Zr-Y-Mo System in a wide temperature range

  • V. V. Bukhanovskii
  • N. P. Rudnitskii
  • I. Mamuzić
Composite and Powder Materials


The structure, hardness, and characteristics of short-term strength and ductility in the temperature range 20–800°C are determined for microlayer composite materials of the Cu-Zr-Y-Mo system obtained by the method of electron beam evaporation and layer-after-later condensation from a vapor phase depending on the chemical composition and heat treatment.


Ductility Electric Contact Uniform Elongation Calcium Fluoride Condensed Material 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    B. A. Movchan and I. S. Malashenko, Refractory Coatings Deposited in Vacuum [in Russian], Naukova Dumka, Kiev (1983).Google Scholar
  2. 2.
    N. Grechanyuk, I. Mamuzić, and P. Shpak, “Modern electron-beam technologies of melting and evaporation of materials in vacuum used by the “Gekont” Company, Ukraine,” Metalurgija, 41(2), 125–128 (2002).Google Scholar
  3. 3.
    N. Grechanyuk, V. Osokin, I. Grechanyuk, et al., “Structure and physical-mechanical properties of composite condensing from steam phase materials Cu-Zr-Y-Mo in a wide range of temperatures,” Metalurgija, 41(3), 228–229 (2002).Google Scholar
  4. 4.
    N. I. Grechanyuk, V. A. Osokin, I. B. Afanas’ev, et al., “Electron-beam process for fabricating materials for electric contacts,” in: Electric Contacts and Electrodes, Coll. Works [in Russian], Frantsevich Institute for Problems of Materials Science, Kiev (1998), pp. 51–66.Google Scholar
  5. 5.
    N. I. Grechanyuk and V. A. Osokin, “A copper-base composite material for electric contacts and a method for its fabrication, Patent No. 17204 A, Ukraine, Publ. 01.04.97,” Byull., No. 5 (1997).Google Scholar
  6. 6.
    N. I. Grechanyuk, V. A. Osokin, I. B. Afanas’ev, and I. N. Grechanyuk, “A composite material for electric contacts and a method for its fabrication, Patent No. 34875 C2, Ukraine, Publ. 16.12.02,” Byull., No. 12 (2002).Google Scholar
  7. 7.
    TU U 20113410.001-98, Precipitation Hardening Materials for Electric Contacts, Performance Specification, Act. 02.06.98 [in Russian].Google Scholar
  8. 8.
    TU U 31.2-20113410-003-2002, Electric Contacts Based on Precipitation-Hardened Materials (MDK). Performance Specification, Act. 06.12.02 [in Russian].Google Scholar
  9. 9.
    R. A. Andrievskii and A. M. Glezer, “Size effects in nanocrystalline materials. I. Special features of structure. Thermodynamics. Phase equilibrium. Kinetic phenomena,” Fiz. Met. Metalloved., 88(1), 50–73 (1999).Google Scholar
  10. 10.
    I. M. Fedorchenko (ed.), Properties of Powders of Metals, Refractory Compounds, and Sintered Materials. A Reference Book [in Russian], Naukova Dumka, Kiev (1978).Google Scholar
  11. 11.
    V. V. Klyuev (ed.), Testing Equipment, a handbook in two volumes, Vol. 2 [in Russian], Mashinostroenie, Moscow (1982).Google Scholar
  12. 12.
    GOST 9651-84, Metals, Methods for Tensile Testing at Elevated Temperatures, Act. 01.01.86 [in Russian], Izd. Standartov, Moscow (1978).Google Scholar
  13. 13.
    M. M. Aleksyuk, V. A. Borisenko, and V. P. Krashchenko, Mechanical Tests at High Temperatures [in Russian], Naukova Dumka, Kiev (1980).Google Scholar
  14. 14.
    V. A. Borisenko and O. B. Oksametnaya, A Method for Determining High-Temperature Hardness by Impressing a Pyramidal and Bicylindrical Indenter, DSTU 2434-94, Act. 01.01.95 [in Russian], UkrNIISSI, Kiev (1994).Google Scholar
  15. 15.
    L. V. Tikhonov, V. A. Kononenko, G. K. Prokopchenko, and V. A. Rafalovskii, Mechanical Properties of Metals and Alloys, a handbook [in Russian], Naukova Dumka, Kiev (1986).Google Scholar
  16. 16.
    A. V. Bobylev, Mechanical and Technological Properties of Metals, a handbook [in Russian], Metallurgiya, Moscow (1980).Google Scholar
  17. 17.
    V. V. Bukhanovskii, “Effect of heat treatment and welding on the mechanical characteristics of low-alloy molybdenum alloys in a wide temperature range,” Metalloved. Term. Obrab. Met., No. 7, 27–32 (2000).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2006

Authors and Affiliations

  • V. V. Bukhanovskii
    • 1
    • 2
  • N. P. Rudnitskii
    • 1
    • 2
  • I. Mamuzić
    • 1
    • 2
  1. 1.G. S. Pisarenko Institute for Strength Problems of the National Academy of Sciences of UkraineKievUkraine
  2. 2.Zagreb UniversitySisakCroatia

Personalised recommendations