This paper is a continuation of Survey I [1], where the historical background and general remarks on the problem formulation and solution methods were outlined and results related to plane-strain problems were reviewed. In the present paper, a review of axisymmetric and 3D buckling delamination problems is presented.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
S. D. Akbarov, “Buckling delamination of elastic and viscoelastic composite plates with cracks: Survey I (Method of solution and problems related to a plane strain state),” Mech. Compos. Mater., 48, No. 6, 681–692 (2012).
S. D. Akbarov and O. G. Rzayev, “On the buckling of elastic and viscoelastic composite circular thick plates with a penny-shaped crack,” Eur. J. Mech. A-Solid, 21, No. 2, 269–279 (2002).
S. D. Akbarov and O. G. Rzayev, “On the delamination of a viscoelastic composite circular plate,” Int. Appl. Mech., 39, No. 3, 368–374 (2003).
Yu. N. Rabotnov, Elements of Hereditary Mechanics of Solid Bodies [in Russian]. Moskow, Nauka, 1977.
R. M. Christensen, Mechanics of Composite Materials. Wiley, N. Y., 1979.
A. N. Guz and V. M. Nazarenko, “Theory of near-surface delamination of composite materials under compression along a macrocrack,” Mech. Compos. Mater., 21, No. 5, 826–833 (1985).
O. G. Rzayev, and S. D. Akbarov, “Local buckling of elastic and viscoelastic coatings around the penny-shaped interface crack,” Int. J. Eng. Sci., 40, 1435–1451 (2002).
S. D. Akbarov, N. Yahnioglu, and O. G. Rzayev, “On influence of singular-type finite elements on the critical force in studying the buckling of a circular plate with a crack,” Int. Appl. Mech., 43, No. 9, 120–129 (2007).
S. D. Akbarov and N. Yahnioglu, “Delamination buckling of a rectangular orthotropic composite plate containing a band crack,” Mech. Compos. Mater., 46, No. 5, 493–504 (2010).
S. D. Akbarov, N. Yahnioglu, and E. E. Karatas, “Buckling delamination of a rectangular plate containing a rectangular crack and made from elastic and viscoelastic composite materials,” Int. J. Solids Struct., 47, 3426–3434 (2010).
E. E. Karataş, Investigation of the Buckling Delamination of Rectangular Thick Plates Made from a Viscoelastic Composite Material, Doctoral Dissertation, Yildiz Technical University, Istanbul, 2011.
S. D. Akbarov, N. Yahnioglu, and A. Tekin, “3D FEM analyses of the buckling delamination of a rectangular plate containing interfacial rectangular cracks and made from elastic and viscoelastic materials,” CMES: Compos. Mod. Eng. Sci., 64, No.2, 147–185 (2010).
S. D. Akbarov, N. Yahnioglu, and A. Tekin, “Local buckling delamination of a rectangular sandwich plate containing interfacial embedded rectangular cracks and made from elastic and viscoelastic materials,” CMC: Continua, Modeling and Computer, 29, No. 1, 41–74 (2012).
A. Tekin, Delamination of elastic and viscoelastic sandwich thick plates with three layers including a crack, Doctoral Dissertation, Yildiz Technical University, Istanbul, 2011.
S. D. Akbarov, Stability Loss and Buckling Delamination: Three-Dimensional Linearized Approach to Elastic and Viscoelastic Composites. Springer, 2013.
Author information
Authors and Affiliations
Corresponding author
Additional information
Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 49, No. 1, pp. 143–154 , January-February, 2013.
Rights and permissions
About this article
Cite this article
Akbarov, S.D. Buckling delamination of elastic and viscoelastic composite plates with cracks: Survey II (Axisymmetric and 3D problems). Mech Compos Mater 49, 97–106 (2013). https://doi.org/10.1007/s11029-013-9325-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11029-013-9325-7