The secondary procedural error associated with calibration of flow meter counters in calibration plants with multiposition benches is estimated.
Similar content being viewed by others
References
V. A. Vlasov, “The reproducibility of the results of a check of water flow meters,” Izmer. Tekhn., No. 6, 46–48 (2009); Measur. Techn., 52, No. 6, 632–635 (2009).
V. A. Vlasov and Ye. M. Zybin, “Evaluation of the reproducibility of the results of verification of counters. Case of water flow meters,” Izmer. Tekhn., No. 12, 27–31 (2010); Measur. Techn., 52, No. 12, 1352–1357 (2010).
GOST 8.156–83, GSI. Cold Water Counters. Calibration Methods and Instruments.
MI 1317–2004, GSI. Results and Characteristics of Measurement Error. Forms of Representation. Methods of Application in Tests of Product Samples and Control of Parameters of Products.
S. F. Levin and S. S. Levin, “The contour estimation of truncated distribution for measuring problems solution,” Izmer. Tekhn., No. 1, 10–13 (2008); Measur. Techn., 51, No. 1, 11–15 (2008).
MI 2916–2005, GSI. Identification of a Probability Distribution in the Solution of Measurement Problems.
S. F. Levin, Lectures on Metrology: Scientific Foundations of the State System for Assurance of the Uniformity of Measurements [in Russian], Moscow Institute of Expertise and Testing, Moscow (2010).
S. F. Levin, Foundations of Metrological Assurance of the Solution of Measurement Problems [in Russian], Zhukovskii Air Force Engineering Academy, Moscow (1996).
R 50.2.004 –2000, GSI. Determination of the Characteristics of Mathematical Models of Dependences Between Physical Quantities in the Solution of Measurement Problems. Fundamental Assumptions [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No. 3, pp. 69–72, March, 2012.
Rights and permissions
About this article
Cite this article
Vlasov, V.A., Zybin, E.M., Levin, S.F. et al. Secondary procedural error of flow meter calibration plants with multiposition benches. Meas Tech 55, 366–370 (2012). https://doi.org/10.1007/s11018-012-9966-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-012-9966-2