Abstract
Basic sources are given for uncertainty in certified values for standard specimens. Methods are given for estimating those values and algorithms for calculating their standard, total, and expanded uncertainties.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Guide to the Expression of Uncertainty in Measurement, ISO, Geneva (1993), Russian translation edited by V. A. Slaev, VNIIM, St. Petersburg (1999).
L. A. Konopel’ko (editor), EURACHEM/CITAC: Guide Quantifying Uncertainty in Analytical Measurement [Russian translation], VNIIM, St. Petersburg (2002).
ISO Guide 35, Reference Materials: General and Statistical Principles for Certification.
GOST 8.531-2002, The State System of Measurements: Standard Specimens of Monolith and Powdered Materials: Methods of Estimating Homogeneity [in Russian]
GOST 8.532-2002, The State System of Measurements: Reference Materials for Composition of Substances: Interlaboratory Metrological Certification: Content and Order of Operations [in Russian].
GOST R ISO 5725-2-2002, Accuracy (Correctness and Precision) in Measurement Methods and Results. Part 2. Basic Method for Determining Reproducibility and Reproduction for a Standard Measurement Method [in Russian].
GOST R ISO 5725-4-2002, Accuracy (Correctness and Precision) in Measurement Methods and Results. Part 4. Basic Methods of Determining the Correctness of a Standard Measurement Method [in Russian].
GOST R ISO 5725-3-2002, Accuracy (Correctness and Precision) in Measurement Methods and Results. Part 3. Intermediate Precision Parameters for a Standard Method of Measurement [in Russian].
GOST R 8.563-96, The State System of Measurements: Methods of Performing Measurements [in Russian].
Author information
Authors and Affiliations
Additional information
__________
Translated from Izmeritel’naya Tekhnika, No. 3, pp. 25–29, March, 2007.
Rights and permissions
About this article
Cite this article
Nalobin, D.P., Osintseva, E.V. Calculating uncertainty for certified values for reference specimens. Meas Tech 50, 259–265 (2007). https://doi.org/10.1007/s11018-007-0058-7
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11018-007-0058-7