Theoretical Foundations of the Design of a Lever Mechanism of Oscillations of the Mold of a Sorting Machine for the Continuous Casting of Billets

Article
  • 2 Downloads

We consider specific features of the design of the lever mechanism of oscillation for the mold of a radial sorting machine with continuous casting of billets under the conditions of the maximum correspondence of the vibration motion of the mold with the axis of extrusion of ingots from this mold. It is shown that the traditional kinematic scheme of the oscillation mechanism does not guarantee high accuracy of the codirectional motion of the mold relative to the technological axis of the channel of this machine.

Keywords

mold oscillation mechanism design kinematic synthesis technological axis trajectory length of the links location of the mold base radius 

References

  1. 1.
    I. I. Artobolevskii, N. I. Levitskii, and S. A. Cherkudinov, Synthesis of Plane Mechanisms, GIFML, Moscow (1959).Google Scholar
  2. 2.
    G. N. Elanskii and I. F. Goncharevich, “Improvement of the modes of operation of the molds of MCCB,” Stal, No. 1, 14–21 (2011).Google Scholar
  3. 3.
    A. L. Sotnikov, Prevention of Deviations of the Parameters of Vibration Motion of the Mold of MCCB Based on the Development of the Methods Used for the Diagnostics of Oscillation Mechanisms: Dissert. Cand. Techn. Sci., Donetsk (2008).Google Scholar
  4. 4.
    A. L. Sotnikov, Development of Scientific Foundations and the Practice of Guaranteeing Structural and Technological Parameters of the Machines for Continuous Casting of Billets: Dissert. Doct. Techn. Sci., Donetsk (2016).Google Scholar
  5. 5.
    N. A. Rodionov, Substantiation of a Rational Procedure of Balancing the Mechanism of Oscillation of the Mold of a Machine for Continuous Casting of Billets: Dissert. Cand. Techn. Sci., Dnepropetrovsk (2016).Google Scholar
  6. 6.
    A. Kikin, Foundations of the Analysis and Synthesis of Plane Lever Mechanisms. Kinematics of Mechanisms, LAP, Saarbrucken (2017).Google Scholar
  7. 7.
    E. Makarov, Engineering Calculations in Mathcad 15, Piter, St. Petersburg (2011).Google Scholar
  8. 8.
    A. B. Kikin, “Synthesis of a guiding hinged four-link unit with evaluation of the complete set of parameters,” Izv. VUZ. Tekhnol. Tekstil. Promyshl., No. 3 (284), 95–100 (2005).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Donetsk National Technical UniversityDonetskUkraine
  2. 2.St. Petersburg State University of Industrial Technologies and DesignSt. PetersburgRussia

Personalised recommendations