Advertisement

Metallurgist

, Volume 61, Issue 11–12, pp 967–970 | Cite as

Manufacture of Low-Sulfur Pipe Steel with Ladle Desulfurization of Cast Iron

  • S. N. Ushakov
  • V. A. Avramenko
  • V. A. Bigeev
  • A. M. Stolyarov
  • M. V. Potapova
Article
  • 27 Downloads

A new cast iron desulfurization unit is put into operation in the oxygen converter workshop of Magnitogorsk Metallurgical Combine. Statistically significant linear dependences are established for the degree of cast iron desulfurization on nitrogen injection duration, overall weight of fluidized lime and magnesium, and the weight ratio of fluidized lime and magnesium. An average degree of metal desulfurization of 77.3% is achieved in checking the technology for cast iron ladle desulfurization with injection lasting up to 30 min of fluidized lime and magnesium in a stream of nitrogen with specific consumption of 1.9 and 0.4 kg/ton, respectively.

Keywords

pipe steel low sulfur content ladle cast iron desulfurization 

References

  1. 1.
    F. Shrama, B. Van Der Berg, and G. Van Hattum, “Comparison of the leading methods for cast iron desulfurization,” Teor. Tekhnol. Metallurg. Proizv., No. 1 (16), 38–43 (2015).Google Scholar
  2. 2.
    M. V. Potapova, R. A. Ishmuratov, and T. M. Nasyrov, “Contemporary technology of blast-furnace cast iron desulfurization,” Teor. Tekhnol. Metallurg. Proizv., No. 1 (14), 26–27 (2014).Google Scholar
  3. 3.
    Yu. A. Kolesnikov, B. A. Budanov, and A. M. Stolyarov, Metallurgical Technology in Highly-Productive Converter Workshop: Textbook, Izd. MGTU im. Nosova, Magnitogorsk (2015).Google Scholar
  4. 4.
    E. A. Krylova, A. M. Stolyarov, V. V. Moskunov, and M. V. Potapova, “Chemical inhomogeneity of continuous slab from a pipe especially low-sulfur steel,” Teor. Tekhnol. Metallurg. Proizv., No. 1 (20), 20–22 (2017).Google Scholar
  5. 5.
    A. M. Stolyarov, B. Somnat, M. V. Potapova, and S. V. Didovich, “Methods for action on steel continuously cast billet formation,” Vestn. MGTU im. Nosova, No. 1 (45), 24–27 (2014).Google Scholar
  6. 6.
    V. A. Bigeev, A. V. Brusnikova, and F. G. Ibragimov, “Aspects of modeling metal injection with a gas and powder stream,” Matem. Progr. Obesp. Sistem Prom. Sots. Sfer., Ni. 1–2, 147–150 (2011).Google Scholar
  7. 7.
    A. V. Artamonov, M. S. Garkavi, and E. V. Kolodezhnaya, “Properties of centrifugal impact grinding line,” Stroit. Mater., No. 9, 28–30 (2014).Google Scholar
  8. 8.
    A. V. Artamonov, M. S. Garkavi, E. V. Kolodezhnaya, et al., “Use of fluidized lime of centrifugal impact refinement for ladle metal desulfurization,” Chern. Metall: Byull. NTiEI, No. 11 (1403), 49–52 (2016).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • S. N. Ushakov
    • 1
  • V. A. Avramenko
    • 1
  • V. A. Bigeev
    • 2
  • A. M. Stolyarov
    • 2
  • M. V. Potapova
    • 2
  1. 1.Magnitogorsk Metallurgical Combine (MMK)MagnitogorskRussia
  2. 2.Nosov Magnitogorsk State Technical UniversityMagnitogorskRussia

Personalised recommendations