, Volume 60, Issue 5–6, pp 538–546 | Cite as

Imparting Ductility to a Steel–Aluminum Composite Laminate in Forming Operations

  • Yu. V. Kontsevoi
  • E. A. Pastukhov
  • E. V. Ignat’eva
  • I. S. Sipatov

One of the major disadvantages of corrosion-inhibiting aluminum coatings on steel is the presence of a brittle intermetallide layer between the steel substrate and aluminum coating. This paper reports results from an investigation of the problem. A manufacturing scheme based on the treatment of such laminated composites by forming operations is proposed.


laminated composite intermetallide structure degree of deformation traditional rolling asymmetric-deformation-zone rolling 


This research was funded by a grant from the Russian Science Foundation (Project No. 15-13-00029). It was carried out with the use of equipment at the Ural-M Center of Collective Use of the Institute of Metallurgy (Ural Division, RAS).


  1. 1.
    L. L. Schraeder (ed.), Corrosion: Handbook, Metallurgiya, Moscow (1981).Google Scholar
  2. 2.
    P. F. Zasukha, V. D. Korshchikov, O. B. Bukhvalov, and A. A. Ershov, Bimetallic Rolled Products, Metallurgiya, Moscow (1971).Google Scholar
  3. 3.
    D. R. M. Brown and A. E. Jackson, “The ‘Elphal’ strip-aluminising process,” Sheet Metal Industr., 39, No. 420, 242–256 (1962).Google Scholar
  4. 4.
    Hamada Motoharu, Kubo Hiroshi, and Harada Shun-ichi. “Development of a new aluminum coated steel sheet with excellent film adhesion in powder coating method,” J. Metal Finish. Soc. Jap., 31, No. 12. 652–660 (1980).Google Scholar
  5. 5.
    N. A. Vatolin, Yu. V. Kontsevoi, and E. V. Tskhai, “Technology for aluminizing steel sheet by powder roll-in,” Stal, No. 12, 44–46 (1996).Google Scholar
  6. 6.
    N. A. Vatolin, Yu. Kontsevoi, and E. V. Tskhai, Patent No. 2081939 RF, IPC C23C24/06, “Method of coating steel strip with aluminum,” subm. 09.08.1994, publ. 06.20.1997.Google Scholar
  7. 7.
    W. J. Bullough, “Aluminum coating of steel sheet by electrostatic field technique.” Iron and Steel Inst., 205, No. 1., 6–10 (1967).Google Scholar
  8. 8.
    A. I. Vitkin and I. I. Teindl, Metallurgical Coatings for Steel Sheet and Strip, Metallurgia, Moscow (1971).Google Scholar
  9. 9.
    Yu. V. Kontsevoi, E. V. Ignat’eva, I. E. Ignat’ev, et al., “Improving a technology for aluminizing steel sheet by powder roll-in,” Stal, No. 4, 66–67 (2003).Google Scholar
  10. 10.
    I. G. Brodova, “Principles of creating high-strength nano-structured aluminum alloys by using the interaction of the liquid and solid states,” 12th All-Russ. Conf. Structure and Properties of Metallic and Slag Melts, Ekaterinburg (2008), pp. 6–8.Google Scholar
  11. 11.
    I. G. Brodova, “High-rate plastic deformation as a means of creating submicro- and nanocrystalline aluminum alloys,” Proc. 3rd Russ. Conf. on Nano Materials, NANO-2009, April 20–24, 2009, Ural. Izd., Ekaterinburg (2009), pp. 279–282.Google Scholar
  12. 12.
    I. G. Shirinkina, I. G. Brodova, L. I. Kaigorodova, et al., “Structural and phase transformations in commercial aluminum alloy 1461 during RKUP,” ibid., pp. 396–398.Google Scholar
  13. 13.
    R. Z. Valiev, Nanostructured Materials Produced by High-Rate Plastic Deformation, Logos, Moscow (2000).Google Scholar
  14. 14.
    M. I. Karpov, V. P. Korzhov, and V. I. Vnukov, Proc. 3rd Russ. Conf. on Nano Materials, NANO-2009, April 20–24, 2009, Ural. Izd., Ekaterinburg (2009), pp. 24–26.Google Scholar
  15. 15.
    A. Le Bail, H. Duroy, and J. L. Fourquet, “Ab-initio structure determination of LiSbWO6 by x-ray powder diffraction,” Mat. Res. Bull., 23, 447–452 (1988).CrossRefGoogle Scholar
  16. 16.
    DiffracPlus Eva, Bruker AXS GmbH, Karlsruhe, Germany (2008).Google Scholar
  17. 17.
    DiffracPlus Topas, Bruker AXS GmbH, Karlsruhe, Germany (2008).Google Scholar
  18. 18.
    K. A. Goraev, V. S. Voropaev, D. G. Verbilo, et al., “Use of asymmetrical rolling to strengthen porous and compact titanium,” Fiz. Tekh. Vys. Davl., 17, No. 1, 103–109 (2007).Google Scholar
  19. 19.
    E. G. Pashinskaya, “Comparative analysis of changes in the structure and properties of copper after rolling by the standard technology and an experimental technology,” Fiz. Tekh. Vys. Davl., 16, No. 1. 95–105 (2006).Google Scholar
  20. 20.
    Yu. V. Kontsevoi, E. V. Ignat’eva, and E. A. Pastukhov, Patent No. 2501630 RF, IPC B22F7/04, “Method of obtaining a composite-laminate of the steel–aluminum system,” subm. 04.16.2012, publ. 12.20.2013.Google Scholar

Copyright information

© Springer Science+Business Media New York 2016

Authors and Affiliations

  • Yu. V. Kontsevoi
    • 1
  • E. A. Pastukhov
    • 1
  • E. V. Ignat’eva
    • 1
  • I. S. Sipatov
    • 1
  1. 1.Institute of MetallurgyUral Division of the Russian Academy of SciencesEkaterinburgRussia

Personalised recommendations