Advertisement

Metallurgist

, Volume 59, Issue 1–2, pp 69–75 | Cite as

Mechanical Tests and Construction of Analytical Models of the Behavior of Materials Under Superplastic Conditions. Part II*

  • E. N. Chumachenko
  • V. K. Portnoi
  • I. V. Logashina
Article

Different test methods are described to determine the mechanical properties of materials in the superplastic state. The flow stress depends on strain and strain rate, the structural parameter of the materials, and temperature. The rheology and mechanics of superplastic deformation are discussed. The methods have been checked for reliability and produced good results in testing titanium alloys and constructing mathematical models as part of an order submitted by the company EADS (Airbus). The information given on the test methods and the subsequent approximation of materials’ mechanical properties is of considerable interest for making reliable predictions of the deformation of materials during shaping operations.

Keywords

Mechanical properties of materials Superplasticity Modeling Mechanical tests 

References

  1. 1.
    Yu. S. Zav’yalov, B. I. Kvasov, and V. L. Miroshnichenko, Spline-Function Methods, Nauka, Moscow (1980).Google Scholar
  2. 2.
    I. I. Novikov and V. K. Portnoy, Superplastizitat von Legierungen, Springer-Verlag, Berlin (1984).Google Scholar
  3. 3.
    E. N. Chumachenko, O. N. Smirnov, and M. A. Tsepin, Superplasticity: Materials, Theory, Technology, LIBROKOM, Moscow (2009).Google Scholar
  4. 4.
    A. K. Gordienko (ed.), Ultrafine Grains in Metals [Russian translation], Metallurgiya, Moscow (1973).Google Scholar
  5. 5.
    T. G. Nieh, J. Wadsworh, and O. D. Sherby, Superplasticity in Metals and Ceramics, Cambridge Univ. Press (1997).Google Scholar
  6. 6.
    E. N. Chumachenko, “Development of computer simulation of industrial superplastic sheet forming,” Mater. Sci. Eng. A, 499, No. 1/2, 342–346 (2009).CrossRefGoogle Scholar
  7. 7.
    O. M. Smirnov, “Aspects of the superplastic deformation of iron-carbon alloys,” Izv. Vyssh. Uchebn. Zaved. Chern. Met., No. 5, 36–41 (2003).Google Scholar
  8. 8.
    A. V. Chekin, O. M. Smirnov, A. N. Ershov, and M. A. Tsepin, “Rheological behavior of superplastic nanocrystalline and amorphous materials,” Izv. Vyssh. Uchebn. Zaved. Tsvetn. Met., No. 4, 18–26 (2001).Google Scholar
  9. 9.
    E. N. Chumachenko, “Modeling the deformation of shells of titanium alloys under low-temperature superplastic conditions,” Izv. RAN. MTT, No. 6, 151–166 (2004).Google Scholar

Copyright information

© Springer Science+Business Media New York 2015

Authors and Affiliations

  • E. N. Chumachenko
    • 1
  • V. K. Portnoi
    • 2
  • I. V. Logashina
    • 1
  1. 1.National Research University – Higher School of EconomicsMoscowRussia
  2. 2.National University of Science and Technology MISiSMoscowRussia

Personalised recommendations