Advertisement

Metallurgist

, Volume 58, Issue 1–2, pp 119–124 | Cite as

Study of the Effect of Ingot Geometry on its Solidification Features Based on Cold Simulation. Part 1

  • A. N. Romashkin
  • D. S. Tolstykh
  • A. N. Mal’ginov
  • V. S. Dub
Article
  • 48 Downloads

This is the first of three articles devoted to studying the effect of ingot geometry on its solidification features based on cold simulation. In the first part, the experimental procedure, calculation of similarity criteria, and construction of a laboratory unit are described in detail.

Keywords

steel ingot cold simulation solidification (crystallization) 

References

  1. 1.
    V. S. Dub, A. N. Romashkin, D. S. Tolstykh, et al., RF Claim 2013147679, IPC B22D11/00, “Device for modelling melt crystallization in a mold,” decision on patent grant 02.12.2014.Google Scholar
  2. 2.
    S. I. Isaev, I. A. Kozhinov, V. I. Kofarov, et al., Heat and Mass Transfer Theory [in Russian] Vysshaya Shkola, Moscow (1979).Google Scholar
  3. 3.
    A. S. Eldarkhanov,V. A. Efimov, and A. S. Nuratdinov, Casting Formation Processes and Modelling Them [in Russian], Maxhinostroenie, Moscow (2001).Google Scholar

Copyright information

© Springer Science+Business Media New York 2014

Authors and Affiliations

  • A. N. Romashkin
    • 1
  • D. S. Tolstykh
    • 1
  • A. N. Mal’ginov
    • 1
  • V. S. Dub
    • 1
  1. 1.Scientific and Production Association Central Research Institute of Machine Building Technology (NPO TsNIITMASh)MoscowRussia

Personalised recommendations