Advertisement

Metallurgist

, Volume 57, Issue 5–6, pp 481–486 | Cite as

Determination of the Optimum Size of Skip Coke

  • A. V. Kuzin
Article
  • 64 Downloads

It is shown that the optimum size of skip coke is 34(40)–80 mm.

Keywords

nut coke metallurgical coke skip coke fraction homogeneity of coke 

References

  1. 1.
    I. D. Balon, “On the optimum coarseness of coke,” Metallurg, No. 11, 2–3 (1966).Google Scholar
  2. 2.
    I. D. Balon, G. V. Zhuravlev, and S. Z. Pritykina, “Requirements on the quality of coke for intensifying blast-furnace smelting,” Metallurg, No. 10, 23–28 (1965).Google Scholar
  3. 3.
    I. A. Koprin, V. L. Krol, and V. F. Andrianov, “On the optimum coarseness of coke,” Metallurg, No. 8, 10–13 (1967).Google Scholar
  4. 4.
    V. A. Krol, G. M. Dorogobid, I. F. Kurganov, et al., “Trial blast-furnace heats on graded coke,” Koks i Khimiya, No. 4, 21–24 (1968).Google Scholar
  5. 5.
    V. A. Ulakhovich, K. K. Shkodin, A. P. Kotov, et al., “On the optimum coarseness of coke for the blast furnace,” Stal, No. 12, 34–38 (1982).Google Scholar
  6. 6.
    V. Tsishkale, G. Esfeld, and W. Sharlo, “High-quality coke – the main prerequisite for efficient blast-furnace smelting,” Chernye Metally, No. 5, 24–32 (1992).Google Scholar
  7. 7.
    W. Eisenhut, E. Engel,W. Kraft, et al., “Tests of the use of coke of different sizes in blast furnaces,” Chernye Metally, No. 2, 25–30 (1979).Google Scholar
  8. 8.
    G. S. Ukhmylova, “Requirements of European blast-furnace engineers on the quality of coke,” Koks i Khimiya, No. 4, 24–26 (2001).Google Scholar
  9. 9.
    G. S. Ukhmylova, “Requirements on the quality of coke for the efficient operation of blast furnaces with a high wind rate,” Koks i Khimiya, No. 9–10, 24–29 (1993).Google Scholar
  10. 10.
    V. G. Gusak, A. M. Kuznetsov, A. V. Emchenko, et al. Theory and Practice in the Preparation of Metallurgical Coke for Blast-Furnace Smelting [in Russian], Naukova Dumka, Kiev (2011).Google Scholar
  11. 11.
    A. V. Kuzin, “Preparation of coke for blast-furnace smelting at the current stage of development of blast-furnace technology in Ukraine,” Metall i Litie Ukrainy, No. 7–8, 20–23 (2008).Google Scholar
  12. 12.
    A. V. Kuzin, “Principles of the systematic preparation of coke for blast-furnace smelting,” Nauk. Pratsi Donets. Nats. Tekhn. Univ. Ser. Metalurg., DonNTU, Donetsk (2010), Iss. 12 (177), pp. 82–88.Google Scholar
  13. 13.
    A. A. Tomash, Structure of the Stock and Gas Movement in Blast Furnaces: Eng. Sci. Doctor. Dissert., 05.16.02, Donetsk (2004).Google Scholar
  14. 14.
    A. V. Kuzin, S. L. Yaroshevskii, A. M. Kuznetsov, et al., “Preparation of coke for blast-furnace smelting at the current stage of development of smelting technology in Ukraine,” Symposium: Fundamental and Applied Problems of Ferrous Metallurgy, IChM im. Z. I. Nekrasova, NAN Ukrainy, Dnepropetrovsk (2008), Vol. 16, pp. 196–204.Google Scholar

Copyright information

© Springer Science+Business Media New York 2013

Authors and Affiliations

  1. 1.Donetsk National Technical UniversityDonetskUkraine

Personalised recommendations