This article examines slag-forming mixture (SFM) feed regimes that provide for effective lubrication in continuous-caster molds and reduce the stresses in the skin of the continuous-cast semifinished product. It is shown that use of the mold oscillation regimes developed by the KORAD Corporation solves these problems and ensures dynamic balancing of the substantial loads that act on the structural elements of the caster during the vibration of massive molds.
Similar content being viewed by others
References
V. M. Parshin, I. F. Goncharevich, A. V. Kuklev, et al., Russian Federation Patent No. 2378083, MPK B22D11/051, “Method for the continuous casting of steel,” No. 2008140037.02, publ 01.10.2010, Byull., No. 1.
A. V. Kuklev, I. F. Goncharevich, Yu. M. Aizin, and S.Yu. Boiko, “Investigation of the technological and dynamic regimes of continuous-caster molds with a spring system and a hydraulic drive,” Problems of the Mechanics of Modern Machinery: Proc. 4th Int. Conf., VSGTU, Ulan-Ude (2009).
A. V. Kuklev, I. F. Goncharevich, and Yu. M. Aizin, “Choosing efficient regimes for feeding lubricant into the molds of continuous steel-casting machines,” Vestn. Mashinostr., No. 12 (2009).
A. V. Kuklev,Yu. M. Zizin, I. F. Goncharevich, and V. I. Danilov, “Computer methods of estimation of efficient process conditions of the CCM’s casting mold,” 6th ECCC, Riccione, Italy, June 2008.
A. V. Kuklev, I. F. Goncharevich,Yu. M. Aizin, S. Yu. Boiko, and A. Yu. Manuilov, “Experience with the development and introduction of a continuous steel-casting machine with a spring suspension and a hydraulic drive,” 10th Congress of Steelmakers (2008).
A. V. Kuklev, I. F. Goncharevich, Yu. M. Aizin, and S. Yu. Boiko, “Investigation of the technological and dynamic regimes of continuous-caster molds with a spring system and a hydraulic drive,” Problems of the Mechanics of Modern Machinery: Proc. 4th Int. Conf., VSGTU, Ulan-Ude (2009).
A. V. Kuklev,Yu. M. Aizin, I. F. Goncharevich, and A. V. Manuilov, “Aspects of the feed of a slag-forming mixture into continuous-caster molds,” Metallurg, No. 5, 40–41 (2009).
A. V. Kuklev, Yu. M. Aizin, I. F. Goncharevich, and S. Yu. Boiko, “Modernizing the suspension system of continuous-caster molds,” Metallurg, No. 8, 47–49 (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 8, pp. 50–56, August, 2011.
Rights and permissions
About this article
Cite this article
Kuklev, A.V., Aizin, Y.M., Goncharevich, I.F. et al. Selecting regimes for the delivery of slag-forming mixtures and oscillation of the molds on continuous casters. Metallurgist 55, 567–573 (2011). https://doi.org/10.1007/s11015-011-9469-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-011-9469-4