Abstract
This article examines certain problems which are delaying the wider use of progressive methods of metal-shaping that employ hot isothermal deformation. It discusses new designs and procedures that could significantly expand the capabilities of existing equipment for precision forging operations which use the superplastic effect.
Similar content being viewed by others
References
O. A. Kaibyshev, Ductility and Superplasticity of Metals [in Russian], Metallurgiya, Moscow (1975).
S. Z. Figlin, V. V. Boitsev, Yu. G. Kalpin, et al., Isothermal Deformation of Metals [in Russian], Mashinstroenie, Moscow (1978).
Met. Prog., 18, No. 11, 34–36 (1980).
Mech. Des., 47, No. 11, 86–88 (1975).
O. M. Smirnov, E. N. Chumachenko, and N. N. Grunin, “Requirements for hydraulic presses used for forging in the superplastic regime,” Kuznech.-Shtamp. Proizv., No. 11, 21–22 (1990).
Structural and Heat-Resistant Materials for High Technology: Symposium, In-t Met. im. A. A. Baikov, Nauka, Moscow (1978).
N. N. Grunin, “Features of the operation of a tool for hot isothermal deformation,” Kuznech.-Shampov. Poizv., No. 7, 4–6 (1981).
Physicochemical Properties of Oxides: Handbook [in Russian], Metallurgiya, Mosow (1978).
N. N. Grunin, “Method of heating the tool and design of the hydraulic drive of presses for hot isothermal deformation,” Kuznech.-Shampov. Poizv., No. 10, 7–10 (1988).
N. N. Malinin, Applied Theory of Plasticity and Creep [in Russian], Mashinostroenie, Moscow (1975).
L. G. Stepanskii and N. N. Grunin, Container for Extruding Products. Author’s Certificate No. 642038 USSR, from 26.04.1977.
E. N. Chumachenko, V. N. Shcherba, and S. E. Chumachenko, “Use of computer simulation to model metal flow for the calculation of extrusion parameters,” Metallurg, No. 10, 31–33 (1998).
E. N. Chumachenko and N. N. Grunin, Method for the Drop Forging of Semifinished Products in the Superplastic State. Author’s Certificate No. 1540124 USSR, from 10.05.88.
K. I. Romanov, Mechanics of the Hot Shaping of Metals [in Russian], Mashinostroenie, Moscow (1993).
R. A. Vasin and F. U. Enikeev, Introduction to the Mechanics of Superplasticity [in Russian], Gilem, Ufa (1998).
I. A. Shur, Production Equipment for the Extrusion of Metals [in Russian], Metallurgiya, Moscow (1979).
E. N. Chumachenko and N. N. Grunin, Unit for Hot Isothermal Deformation. Author’s Certificate No. 1704374 USSR, from 31.03.1989.
E. N. Chumachenko, M. A. Tsepin, S. E. Chumachenko, and L. E. Rogalevich, “Design of technologies for drop forging and of elements of the die, fittings, and other equipment by means of the software application SPLEN,” Vestn. Mashinostr., No. 4, 37–45 (2000).
E. N. Chumachenko, O. M. Smirnov, and M. A. Tsepin, Superplasticity: Materials, Theory, Technology (Synergetics: From the Past to the Future), KomKniga, Moscow (2005).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallurg, No. 11, pp. 32–36, November, 2005.
Rights and permissions
About this article
Cite this article
Chumachenko, E.N., Grunin, N.N. Problems with making industrial use of the superplasticity of metals and alloys during their shaping. Metallurgist 49, 417–423 (2005). https://doi.org/10.1007/s11015-006-0017-6
Issue Date:
DOI: https://doi.org/10.1007/s11015-006-0017-6