We study the analytic and numerical methods for the solution of problems of the theory of cracks located near the surfaces of three-dimensional and thin-walled bodies under thermal and force static and dynamic loads. We describe the influence of the surfaces of the body or the interfaces between its materials on the static and dynamic stress intensity factors in the vicinity of the defects.
Similar content being viewed by others
References
V. V. Panasyuk, M. P. Savruk, and A. P. Datsyshin, Stress Distributions Near Cracks in Plates and Shells [in Russian], Naukova Dumka, Kiev (1976).
M. P. Savruk, Two-Dimensional Problems of Elasticity for Bodies with Cracks [in Russian], Naukova Dumka, Kiev (1981).
V. A. Osadchuk, Stress–strain State and Limiting Equilibrium of Shells with Cuts [in Russian], Naukova Dumka, Kiev (1985).
Y. Murakami (editor), Stress Intensity Factors: Handbook, Pergamon Press, Oxford (1987).
V. A. Osadchuk and Ya. S. Podstrigach, “Stressed state and limiting equilibrium of shells with cracks,” in: VINITI Series, Mechanics of Deformable Bodies [in Russian], Vol. 18, VINITI, Moscow (1986), pp. 3–52.
R. M. Kushnir and M. M. Nykolyshyn, “Stressed state and limiting equilibrium of piecewise homogeneous cylindrical shells with cracks,” Mat. Met. Fiz.-Mekh. Polya, 46, No. 1, 60–74 (2003).
V. A. Osadchuk and M. M. Nikolishin, “Stressed states of a closed transversely isotropic cylindrical shell and an infinite plate with cracks,” in: Math. Met. Fiz.-Mekh. Polya, No. 3 (1976), pp. 30–36.
F. E. Erdogan, M. Ratwani, and U. Yuceoglu, “On the effect of orthotropy in a cracked cylindrical shell,” Int. J. Fract., 10, No. 3, 369–374 (1974).
V. P. Shevchenko and E. N. Dovbnya, “Method of boundary integral equations in the problems of statics of gently sloping orthotropic shells with notches and holes,” Mat. Met. Fiz.-Mekh. Polya, 46, No. 1, 47–59 (2003).
L. A. Fil’shtinskii and V. A. Lyubchak, “Elastic behavior of semiinfinite anisotropic plates and shells under the action of concentrated loads,” in: Dynamics and Strength of Machines [in Russian], Issue 33 (1981), pp. 11–15.
V. I. Kir’yan, “A method for the evaluation of the resistance of structural steels to ductile fracture,” Avtomat. Svarka, No. 11, 1–6 (1984).
S. N. Alturi (editor), Computational Methods in the Mechanics of Fracture, North Holland, Amsterdam (1986).
M. M. Nikolishin, V. I. Shvabyuk, and Yu. P. Feshchuk, “Limiting equilibrium of a closed transversely isotropic spherical shell with two surface cracks,” Prikl. Mekh., 45, No. 4, 109–115 (2009).
M. Ya. Leonov and V. V. Panasyuk, “Propagation of very small cracks in solid bodies,” Prikl. Mekh., 5, No. 4, 391–401 (1959).
V. V. Panasyuk, Limiting Equilibrium of Brittle Bodies with Cracks [in Russian], Naukova Dumka, Kiev (1968).
D. S. Dugdale, “Yielding of steel sheets containing slits,” J. Mech. Phys. Solids, 8, No. 2, 100–104 (1960).
E. S. Folias, “On the theory of fracture of curved sheets,” Eng. Fract. Mech., 2, No. 2, 151–164 (1970).
R. M. Kushnir, M. M. Nykolyshyn, and V. A. Osadchuk, Elastic and Elastoplastic Limiting State of Shells with Defects [in Ukrainian], Spolom, Lviv (2003).
V. I. Kyr’yan, V. A. Osadchuk, and M. M. Nykolyshyn, Fracture Mechanics of Welded Joints in Metal Structures [in Ukrainian], Spolom, Lviv (2007).
V. A. Osadchuk and T. M. Nykolyshyn, “Mathematical model of an internal crack in an elastoplastic cylindrical shell,” Mat. Met. Fiz.-Mekh. Polya, 41, No. 2, 111–116 (1998); English translation: J. Math. Sci., 99, No. 5, 1648–1654 (2000).
K. C. Kim and N. A. Noda, “Green’s function approach to the deflection of a FGM plate under transient thermal loading,” Arch. Appl. Mech., 72, 127–137 (2002).
Z. S. Shao, L. F. Fan, and T. J. Wang, “Analytical solutions of stresses in functionally graded circular hollow cylinder with finite length,” Key Eng. Mater., 76, 261–263 (2004).
R. M. Kushnir, M. M. Nykolyshyn, and M. I. Rostun, “Limiting equilibrium of a cylindrical shell made of functionally gradient material and containing a surface crack,” Mashynoznavstvo, No. 5, 3–7 (2006).
R. M. Kushnir, M. M. Nykolyshyn, and M. I. Rostun, “Limiting equilibrium of a spherical shell nonuniform across the thickness and containing a surface crack,” Fiz.-Khim. Mekh. Mater., 43, No. 3, 5–11 (2007); English translation: Mater. Sci., 43, No. 3, 291–299 (2007).
M. P. Savruk and V. M. Zelenyak, Two-Dimensional Problems of Thermoelasticity for Piecewise Homogeneous Bodies with Cracks [in Ukrainian], Rastr-7, Lviv (2009).
H. Sekine, “Thermal stresses near tips of an insulated line crack in a semiinfinite medium under uniform heat flow,” Eng. Fract. Mech., 9, 499–507 (1977).
J. Tweed and S. Love, “The thermoelastic problem for a half plane with an internal line crack,” Int. J. Eng. Sci., 17, 357–363 (1979).
H. Sekine, “Crack problem for a semiinfinite solid with heated bounding surface,” Trans. ASME, J. Appl. Mech., 44, No. 4, 637–643 (1977).
S. Matysjak, A. Yevtushenko, and V. Zelenjak, “Frictional heating of a half space with cracks. 1. Single or periodic system of subsurface cracks,” Tribol. Int., 32, No. 5, 237–243 (1999).
S. I. Matysiak, O. O. Evtushenko, and V. M. Zeleniak, “Heating of a half space containing an inclusion and a crack,” Fiz.-Khim. Mekh. Mater., 40, No. 4, 34–40 (2004); English translation: Mater. Sci., 40, No. 4, 466–474 (2004).
K. N. Srivastava and R. M. Palaiya, “The distribution of thermal stress in a semiinfinite elastic solid containing a penny-shaped crack,” Int. J. Eng. Sci., 7, No. 7, 647–666 (1969).
K. N. Srivastava and K. Singh, “The effect of penny-shaped crack on the distribution of stress in a semiinfinite solid,” Int. J. Eng. Sci., 7, No. 5, 469–490 (1969).
G. S. Kit and M. V. Khai, Method of Potentials in Three-Dimensional Problems of Thermoelasticity for Bodies with Cracks [in Russian], Naukova Dumka, Kiev (1989).
H. S. Kit and O. P. Sushko, “Stationary temperature field in a semiinfinite body with thermally active or thermally insulated diskshaped inclusion,” in: Phys.-Math. Modeling Inform. Technol. [in Ukrainian], Issue 13 (2011), pp. 67–80.
H. S. Kit and O. P. Sushko, “Stressed state of a semiinfinite body in the presence of heat release in a penny-shaped domain perpendicular to its boundary,” Prykl. Probl. Mekh. Mat., Issue 5, 122–126 (2007).
G. S. Kit and O. P. Sushko, “Stressed state of a semiinfinite body in the presence of heat release in a penny-shaped domain parallel to its boundary,” in: Teor. Prikl. Mekh., Issue 43 (2007), pp. 3–8.
H. S. Kit and O. P. Sushko, “Thermoelastic state of a half space containing a thermally active circular crack perpendicular to its edge,” Fiz.-Khim. Mekh. Mater., 41, No. 2, 16–22 (2005); English translation: Mater. Sci., 41, No. 2, 150–157 (2005).
H. S. Kit and O. P. Sushko, “Thermoelastic state of a half space containing a thermally active elliptic crack perpendicular to its boundary,” Fiz.-Khim. Mekh. Mater., 42, No. 2, 45–52 (2006); English translation: Mater. Sci., 42, No. 2, 189–199 (2006).
G. S. Kit and O. P. Sushko, “Interaction of a thermally active elliptic crack with the boundary of a half space,” in: Teor. Prikl. Mekh., Issue 42 (2006), pp. 45–51.
H. Kit and O. Sushko, “The distribution of thermal stresses in a semiinfinite solid containing a thermally active crack,” in: Mater. Of the Third Symp. on the “Fracture Mechanics of Materials and Structures,” Bialystok, Poland (2005), pp. 141–144.
H. S. Kit and O. P. Sushko, “Thermoelastic state of a half space having a thermally active crack parallel to its boundary,” Prikl. Mekh., 43, No. 4, 46–54 (2007); English translation: Int. Appl. Mech., 43, No. 4, 395–402 (2007).
A. N. Guz’ and V. V. Zozulya, Brittle Fracture of Materials Under Dynamic Loads [in Russian], Naukova Dumka, Kiev (1993).
H. S. Kit, V. V. Mykhas’kiv, and M. V. Khaj, “Method of potentials in three-dimensional static and dynamic problems of the theory of cracks,” Fiz.-Khim. Mekh. Mater., 32, No. 1, 22–32 (1996); English translation: Mater. Sci., 32, No. 1, 14–24 (1996).
C. Zhang and D. Gross, On Wave Propagation in Elastic Solids with Cracks, Computational Mechanics Publication, Southampton (1998).
J. Sladek, V. Sladek, V. V. Mykhas’kiv, and V. Z. Stankevych, “Application of mapping theory to boundary integral formulation of 3D dynamic crack problems,” Eng. Anal. Bound. Elem., 27, No. 3, 203–213 (2003).
M. P. Savruk, “New method for the solution of dynamic problems of the theory of elasticity and fracture mechanics,” Fiz.-Khim. Mekh. Mater., 39, No. 4, 7–11 (2003); English translation: Mater. Sci., 39, No. 4, 465–471 (2003).
A. N. Guz’, V. V. Zozulya, and A. V. Men’shikov, “Three-dimensional contact dynamic problem for an elliptic crack in the case of normal incidence of harmonic tension-compression waves,” Prikl. Mekh., 39, No. 12, 74–77 (2003).
V. V. Mikhas’kiv and I. O. Butrak, “Stress concentration around a spheroidal crack caused by a harmonic wave incident at an arbitrary angle,” Prikl. Mekh., 42, No. 1, 70–77 (2006); English translation: Int. Appl. Mech., 42, No. 1, 61–66 (2006).
V. V. Mykhas’kiv, C. Zhang, J. Sladek, and V. Sladek, “A frequency domain BEM for 3D nonsynchronous crack interaction analysis in elastic solids,” Eng. Anal. Bound. Elem., 30, No. 3, 167–175 (2006).
N. D. Vaisfel’d, “Nonstationary problems of the diffraction of elastic waves on defects in spherically layered media,” Izv. Ross. Akad. Nauk, Mekh. Tverd. Tela, No. 3, 74–86 (2005).
D. B. Kurylyak, Z. T. Nazarchuk, and M. V. Voitko, “Stress field in a crack on the interface of materials irradiated with SH-waves,” Fiz.-Khim. Mekh. Mater., 43, No. 4, 18–30 (2007); English translation: Mater. Sci., 43, No. 4, 464–478 (2007).
A. N. Guz’, I. A. Guz’, A. V. Men’shikov, and V. A. Men’shikov, “Stress intensity factors for materials with interlayer cracks under harmonic loading,” Prikl. Mekh., 46, No. 10, 3–13 (2010).
C. H. Kuo and L. M. Keer, “Three-dimensional analysis of cracking in a multilayered composite,” Trans. ASME, J. Appl. Mech., 62, No. 2, 273–281 (1995).
M. V. Khai and O. I. Stepanyuk, “Interaction of parallel cracks across the interface of materials,” Fiz.-Khim. Mekh. Mater., 35, No. 2, 12–20 (1999); English translation: Mater. Sci., 35, No. 2, 157–165 (1999).
N. A. Noda, R. Ohzono, and M. C. Chen, “Analysis of an elliptical crack parallel to a bimaterial interface under tension,” Mech. Mater., 35, No. 11, 1059–1076 (2003).
H. T. Xiao, Z. Q. Yue, L. G. Tham, and Y. R. Chen, “Stress intensity factors for penny-shaped cracks perpendicular to graded interfacial zone of bonded bimaterials,” Eng. Fract. Mech., 72, No. 1, 121–143 (2005).
C. W. Shul and K. Y. Lee, “Dynamic response of subsurface interface crack in multilayered orthotropic half space under antiplane shear impact loading,” Int. J. Solids Struct., 38, No. 20, 3563–3574 (2001).
J. Lei, Y. S. Wang, and D. Gross, “Dynamic interaction between a subinterface crack and the interface in a bimaterial: time-domain BEM analysis,” Arch. Appl. Mech., 73, No. 3–4, 225–240 (2003).
V. V. Mykhas’kiv and O. I. Stepanyuk, “Boundary integral analysis of the symmetric dynamic problem for an infinite bimaterial solid with an embedded crack,” Meccanica, 36, No. 4, 479–495 (2001).
V. V. Mikhas’kiv, J. Sladek, V. Sladek, and O. I. Stepanyuk, “Stress concentration near an elliptic crack in the interface of elastic bodies under steady-state oscillations,” Prikl. Mekh., 40, No. 6, 81–89 (2004); English translation: Int. Appl. Mech., 40, No. 6, 664–671 (2004).
V. V. Mykhas’kiv and I. Ya. Zhbadynskyi, “Solution of nonstationary problems for composite bodies with cracks by the method of integral equations,” Fiz.-Khim. Mekh. Mater., 43, No. 1, 33–42 (2007); English translation: Mater. Sci., 43, No. 1, 27–37 (2007).
V. Mykhas’kiv, I. Zhbadynskyi, and C. Zhang, “Elastodynamic analysis of multiple crack problem in 3D bimaterials by the BEM,” Int. J. Numer. Meth. Biomed. Eng., 26, No. 12, 1934–1946 (2010).
V. Mykhas’kiv, V. Stankevych, I. Zhbadynskyi, and C. Zhang, “3D dynamic interaction between a penny-shaped crack and a thin interlayer joining two elastic half spaces,” Int. J. Fract., 159, No. 2, 137–149 (2009).
V. V. Mykhas’kiv, V. Z. Stankevych, E. V. Hlushkov, and N. V. Hlushkova, “Dynamic stresses in a composite body with circular crack under the conditions of sliding contact of its components,” Mat. Met. Fiz.-Mekh. Polya, 53, No. 1, 80–87 (2010).
V. V. Panasyuk (editor), Fracture Mechanics and Strength of Materials: A Handbook [in Ukrainian], Vol. 5: Z. T. Nazarchuk, V. V. Koshovyi, V. R. Skal’s’kyi, et al., Nondestructive Testing and Engineering Diagnostics, Karpenko Physicomechanical Institute, Ukrainian National Academy of Sciences, Lviv (2001).
O. E. Andreikiv, V. R. Skal’s’kyi, and H. T. Sulym, Theoretical Foundations of the Method of Acoustic Emission in Fracture Mechanics [in Ukrainian], Spolom, Lviv (2007).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 47, No. 2, pp. 56–66, March–April, 2011.
Rights and permissions
About this article
Cite this article
Kit, H.S., Kushnir, R.M., Mykhas’kiv, V.V. et al. Methods for the determination of static and dynamic stresses in bodies with subsurface cracks. Mater Sci 47, 177–187 (2011). https://doi.org/10.1007/s11003-011-9382-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-011-9382-9