We show the possibility of application of the approaches of mechanics to the determination of the relative fractions and sizes of phases in antifriction alloys with elevated wear resistance. It is demonstrated that the wear resistance of B16 babbitt increases if its microstructure contains an Sn Sb hardening phase whose size is equal to 53 μm.
Similar content being viewed by others
References
Ya. I. Burak, Selected Works [in Ukrainian], Akhil, Lviv (2001).
V. T. Troshchenko, Deformation and Fracture of Metals Under High-Cycle Loading [in Russian], Naukova Dumka, Kiev (1981).
V. V. Panasyuk, Limiting Equilibrium of Brittle Bodies with Cracks [in Russian], Naukova Dumka, Kiev (1968).
G. S. Pisarenko and A. A. Lebedev, Deformation and Strength of Materials in Complex Stressed States [in Russian], Naukova Dumka, Kiev (1976).
Ya. I. Burak and S. Ya. Chaplya (editors), Physicomathematical Modeling of Complex Systems [in Ukrainian], Spolom, Lviv (2004).
V. Ya. Belousov, “Physicochemical characteristics of composite materials based on tungsten carbide,” Fiz.-Khim. Mekh. Mater., 15, No. 5, 95–97 (1979).
Ya. Burak, M. Kuzin, and O. Kuzin, “Technological elevation of the wear resistance of plain bearings by optimizing the structural parameters of metallic systems,” Mashynoznavstvo, No. 4, 106–110 (2006).
Ya. I. Burak and M. O. Kuzin, “Influence of the structure of babbitt on the stress-strain state in the zone of friction contact,” Fiz.-Khim. Mekh. Mater., 43, No. 6, 27–30 (2007).
D. N. Garkunov, Triboengineering (Wear and Wearlessness). A Textbook [in Russian], Izd. MSKhA, Moscow (2001).
O. A. Kuzin, I. V. Kurylo, and M. O. Kuzin, “Role of the structure in the processes of wear of B16 babbitt,” Metaloznav. Obrob. Met., No. 4, 14–18 (2007).
A. A. Petrosyants, V. Ya. Belousov, and V. S. Sarkisov, Elevation of the Durability of the Components of Gas and Oil Field Equipment [in Russian], Nedra, Moscow (1979).
I. I. Berkovich and D. G. Gromakovskii, Tribology. Physical Foundations, Mechanics, and Engineering Applications. A Textbook for Higher Schools [in Russian], Samara State Technical University, Samara (2000).
M. Kuzin, “Simulating models of structure for the numerical analysis of the parameters of ferritic–pearlitic steels with elevated wear resistance,” Nauk. Zap. Ukr. Akad. Druk., No. 11(1), 15–22 (2007).
I. V. Kurylo, A. O. Matkovs’kyi, and D. I. Savyts’kyi, “Mechanical properties of single crystals of yttrium aluminate and neodymium gallate,” Metallofiz. Noveish. Tekhnol., 24, No. 8, 1133–1145 (2002).
T. M. Meshcheryakova and M. O. Kuzin, “Application of the method of simulating modeling to the assessment of the influence of structural parameters on the wear resistance of plain bearings in the motors of mainline electric locomotives,” Nauk. Visn. Donetsk. Nats. Tekhn. Univ., No. 21, 272–278 (2008).
I. G. Goryacheva, Mechanics of Friction Interaction [in Russian], Nauka, Moscow (2001).
K. L. Johnson, Contact Mechanics, Cambridge University Press, Cambridge (1985).
V. E. Vil’deman, Yu. V. Sokolkin, and A. A. Tashkinov, Mechanics of Inelastic Deformation and Fracture of Composite Materials [in Russian], Nauka, Moscow (1997).
A. A. Alyamovskii, Solid Works/COSMOS Works. Engineering Analysis by the Finite-Element Method [in Russian], DMK Press, Moscow (2004).
Yu. G. Matvienko, Models and Criteria of Fracture Mechanics [in Russian], Fizmatlit, Moscow (2006).
Ya. Burak and M. Kuzin, “Construction of a mathematical model of the mechanics of elastic metallic systems with regard for the dissipative processes,” Mashynoznavstvo, No. 10, 8–11 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 45, No. 4, pp. 105–109, July–August, 2009.
Rights and permissions
About this article
Cite this article
Kuzin, O.A., Yatsyuk, R.A. & Kuzin, M.O. Application of the models of mechanics for the evaluation of the microstructural parameters of alloys with elevated wear resistance. Mater Sci 45, 589–594 (2009). https://doi.org/10.1007/s11003-010-9218-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-010-9218-z