Thermal resistance modeling of oscillating heat pipes filled with acetone by using artificial neural network

Abstract

Oscillating heat pipes (OHPs) are applicable in different energy systems such as solar collectors, desalinations and fuel cells as thermal mediums or thermal management devices. Thermal resistance of OHPs is affected by different elements including the architecture of OHP, filling ratio, heat load and operating fluid. Depending on the operating temperature range, appropriate working fluid is used. Acetone is one of the fluids that is applicable for the OHPs working in low or medium temperatures. Performance modeling of OHPs can be conducted by employing numerical simulation and data-driven methods. Utilizing powerful data-driven methods can be preferred in terms of time consumption and computational cost. In the present article, two types of artificial neural network, multilayer perceptron (MLP) and group method of data handling (GMDH), are utilized for thermal resistance modeling of OHPs filled with acetone under various working conditions. To find the models with the highest possible accuracy, different architectures are considered in this work. Models’ outputs revealed that the thermal resistance of the aforementioned OHPs can be reliably predicted by using the abovementioned methods. R-squared of the models proposed by using MLP and GMDH are 0.989 and 0.965, respectively. Values of mean squared errors for the mentioned methods are around 0.0045 and 0.0144, respectively.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Abbreviations

ANFIS:

Adaptive neuro-fuzzy inference system

ANN:

Artificial neural network

GMDH:

Group method of data handling

MLP:

Multilayer perceptron

MSE:

Mean square error

OHP:

Oscillating heat pipe

SVM:

Support vector machine

\(\omega\) :

Mass vector

\(x_{{\text{i}}}\) :

Input of the network

\(y_{{\text{i}}}\) :

Output of the network

\(\theta\) :

Threshold

References

  1. 1.

    Zhang Y, Zhang X, Li M, Liu Z. Research on heat transfer enhancement and flow characteristic of heat exchange surface in cosine style runner. Heat Mass Transf Und Stoffuebertragung. 2019;55:3117–31. https://doi.org/10.1007/s00231-019-02647-5.

    Article  Google Scholar 

  2. 2.

    Han X, Chen N, Yan J, Liu J, Liu M, Karellas S. Thermodynamic analysis and life cycle assessment of supercritical pulverized coal-fired power plant integrated with No. 0 feedwater pre-heater under partial loads. J Clean Prod. 2019;233:1106–22. https://doi.org/10.1016/j.jclepro.2019.06.159.

    Article  Google Scholar 

  3. 3.

    Xu Q, Zou Z, Chen Y, Wang K, Du Z, Feng J, et al. Performance of a novel-type of heat flue in a coke oven based on high-temperature and low-oxygen diffusion combustion technology. Fuel. 2020;267:117160. https://doi.org/10.1016/j.fuel.2020.117160.

    CAS  Article  Google Scholar 

  4. 4.

    Khalili M, Shafii MB. Experimental and numerical investigation of the thermal performance of a novel sintered-wick heat pipe. Appl Therm Eng. 2016;94:59–75. https://doi.org/10.1016/j.applthermaleng.2015.10.120.

    Article  Google Scholar 

  5. 5.

    Ebrahimi M, Shafii MB, Bijarchi MA. Experimental investigation of the thermal management of flat-plate closed-loop pulsating heat pipes with interconnecting channels. Appl Therm Eng. 2015;90:838–47. https://doi.org/10.1016/J.APPLTHERMALENG.2015.07.040.

    CAS  Article  Google Scholar 

  6. 6.

    Kwon GH, Kim SJ. Operational characteristics of pulsating heat pipes with a dual-diameter tube. Int J Heat Mass Transf. 2014;75:184–95. https://doi.org/10.1016/J.IJHEATMASSTRANSFER.2014.03.032.

    Article  Google Scholar 

  7. 7.

    Ahmadi MH, Sadeghzadeh M, Raffiee AH, Chau K. Applying GMDH neural network to estimate the thermal resistance and thermal conductivity of pulsating heat pipes. Eng Appl Comput Fluid Mech. 2019;13:327–36. https://doi.org/10.1080/19942060.2019.1582109.

    Article  Google Scholar 

  8. 8.

    Nazari MA, Ghasempour R, Shafii MB, Ahmadi MH. Experimental investigation of triton X-100 solution on pulsating heat pipe thermal performance. J Thermophys Heat Transf. 2018. https://doi.org/10.2514/1.T5295.

    Article  Google Scholar 

  9. 9.

    Daimaru T, Yoshida S, Nagai H. Study on thermal cycle in oscillating heat pipes by numerical analysis. Appl Therm Eng. 2017;113:1219–27. https://doi.org/10.1016/J.APPLTHERMALENG.2016.11.114.

    CAS  Article  Google Scholar 

  10. 10.

    Chen H, Chen A, Xu L, Xie H, Qiao H, Lin Q, et al. A deep learning CNN architecture applied in smart near-infrared analysis of water pollution for agricultural irrigation resources. Agric Water Manag. 2020;240:106303. https://doi.org/10.1016/j.agwat.2020.106303.

    Article  Google Scholar 

  11. 11.

    Zhang H, Qiu Z, Cao J, Abdel-Aty M, Xiong L. Event-triggered synchronization for neutral-type semi-Markovian neural networks with partial mode-dependent time-varying delays. IEEE Trans Neural Netw Learn Syst. 2020;31:4437–50. https://doi.org/10.1109/TNNLS.2019.2955287.

    Article  PubMed  Google Scholar 

  12. 12.

    Qiu T, Shi X, Wang J, Li Y, Qu S, Cheng Q, et al. Deep learning: a rapid and efficient route to automatic metasurface design. Adv Sci. 2019;6:1900128. https://doi.org/10.1002/advs.201900128.

    Article  Google Scholar 

  13. 13.

    Zhu Q. Research on road traffic situation awareness system based on image big data. IEEE Intell Syst. 2020;35:18–26. https://doi.org/10.1109/MIS.2019.2942836.

    Article  Google Scholar 

  14. 14.

    Ahmadi Nadooshan A, Hemmat Esfe M, Afrand M. Prediction of rheological behavior of SiO2-MWCNTs/10W40 hybrid nanolubricant by designing neural network. J Therm Anal Calorim. 2018;131:2741–8. https://doi.org/10.1007/s10973-017-6688-3.

    CAS  Article  Google Scholar 

  15. 15.

    Bagheri H, Ahmadi NA. The effects of hybrid nano-powder of zinc oxide and multi walled carbon nanotubes on the thermal conductivity of an antifreeze. Phys E Low-Dimens Syst Nanostruct. 2018;103:361–6. https://doi.org/10.1016/j.physe.2018.06.017.

    CAS  Article  Google Scholar 

  16. 16.

    Esfe MH, Rejvani M, Karimpour R, Abbasian Arani AA. Estimation of thermal conductivity of ethylene glycol-based nanofluid with hybrid suspensions of SWCNT–Al2O3 nanoparticles by correlation and ANN methods using experimental data. J Therm Anal Calorim. 2017;128:1359–71. https://doi.org/10.1007/s10973-016-6002-9.

    CAS  Article  Google Scholar 

  17. 17.

    Maleki A, Elahi M, Assad MEH, Alhuyi Nazari M, Safdari Shadloo M, Nabipour N. Thermal conductivity modeling of nanofluids with ZnO particles by using approaches based on artificial neural network and MARS. J Therm Anal Calorim. 2020;1:1–12. https://doi.org/10.1007/s10973-020-09373-9.

    CAS  Article  Google Scholar 

  18. 18.

    Wang X, Li B, Yan Y, Gao N, Chen G. Predicting of thermal resistances of closed vertical meandering pulsating heat pipe using artificial neural network model. Appl Therm Eng. 2019;149:1134–41.

    Article  Google Scholar 

  19. 19.

    Patel VM, Mehta HB. Thermal performance prediction models for a pulsating heat pipe using Artificial Neural Network (ANN) and Regression/Correlation Analysis (RCA). Sādhanā. 2018;43:184. https://doi.org/10.1007/s12046-018-0954-3.

    CAS  Article  Google Scholar 

  20. 20.

    Wang N, Maleki A, Alhuyi Nazari M, Tlili I, Safdari SM. Thermal conductivity modeling of nanofluids contain MgO particles by employing different approaches. Symmetry (Basel). 2020;12:206.

    CAS  Article  Google Scholar 

  21. 21.

    Komeilibirjandi A, Raffiee AH, Maleki A, Alhuyi Nazari M, Safdari SM. Thermal conductivity prediction of nanofluids containing CuO nanoparticles by using correlation and artificial neural network. J Therm Anal Calorim. 2020;139:2679–89. https://doi.org/10.1007/s10973-019-08838-w.

    CAS  Article  Google Scholar 

  22. 22.

    Faghri A, Guo Z. Integration of heat pipe into fuel cell technology. Heat Transf Eng. 2008;29:232–8. https://doi.org/10.1080/01457630701755902.

    CAS  Article  Google Scholar 

  23. 23.

    Clement J, Wang X. Experimental investigation of pulsating heat pipe performance with regard to fuel cell cooling application. Appl Therm Eng. 2013;50:268–74. https://doi.org/10.1016/J.APPLTHERMALENG.2012.06.017.

    Article  Google Scholar 

  24. 24.

    Kargar SAH, Ghiasi M, Jahangiri MS, Shafii MB. A novel integrated solar desalination system with a pulsating heat pipe. Desalination. 2013;311:206–10. https://doi.org/10.1016/J.DESAL.2012.10.029.

    Article  Google Scholar 

  25. 25.

    Arab M, Soltanieh M, Shafii MB. Experimental investigation of extra-long pulsating heat pipe application in solar water heaters. Exp Therm Fluid Sci. 2012;42:6–15. https://doi.org/10.1016/J.EXPTHERMFLUSCI.2012.03.006.

    Article  Google Scholar 

  26. 26.

    Alizadeh H, Ghasempour R, Shafii MB, Ahmadi MH, Yan W-M, Nazari MA. Numerical simulation of PV cooling by using single turn pulsating heat pipe. Int J Heat Mass Transf. 2018;127:203–8. https://doi.org/10.1016/J.IJHEATMASSTRANSFER.2018.06.108.

    Article  Google Scholar 

  27. 27.

    Alizadeh H, Alhuyi Nazari M, Ghasempour R, Shafii MB, Akbarzadeh A. Numerical analysis of photovoltaic solar panel cooling by a flat plate closed-loop pulsating heat pipe. Sol Energy. 2020;206:455–63. https://doi.org/10.1016/j.solener.2020.05.058.

    Article  Google Scholar 

  28. 28.

    Deng Z, Zheng Y, Liu X, Zhu B, Chen Y. Experimental study on thermal performance of an anti-gravity pulsating heat pipe and its application on heat recovery utilization. Appl Therm Eng. 2017;125:1368–78. https://doi.org/10.1016/j.applthermaleng.2017.07.107.

    Article  Google Scholar 

  29. 29.

    Khodami R, Abbas Nejad A, Ali Khabbaz MR. Experimental investigation of energy and exergy efficiency of a pulsating heat pipe for chimney heat recovery. Sustain Energy Technol Assess. 2016;16:11–7. https://doi.org/10.1016/J.SETA.2016.04.002.

    Article  Google Scholar 

  30. 30.

    Mahajan G, Thompson SM, Cho H. Energy and cost savings potential of oscillating heat pipes for waste heat recovery ventilation. Energy Rep. 2017;3:46–53. https://doi.org/10.1016/J.EGYR.2016.12.002.

    Article  Google Scholar 

  31. 31.

    Jokar A, Godarzi AA, Saber M, Shafii MB. Simulation and optimization of a pulsating heat pipe using artificial neural network and genetic algorithm. Heat Mass Transf. 2016;52:2437–45. https://doi.org/10.1007/s00231-016-1759-8.

    CAS  Article  Google Scholar 

  32. 32.

    Jq E, Li YQ, Gong JK. Function chain neural network prediction on heat transfer performance of oscillating heat pipe based on grey relational analysis. J Cent South Univ Technol. 2011;18:1733–7. https://doi.org/10.1007/s11771-011-0895-z.

    CAS  Article  Google Scholar 

  33. 33.

    Ahmadi MH, Tatar A, Alhuyi Nazari M, Ghasempour R, Chamkha AJ, Yan W-M. Applicability of connectionist methods to predict thermal resistance of pulsating heat pipes with ethanol by using neural networks. Int J Heat Mass Transf. 2018;126:1079–86. https://doi.org/10.1016/j.ijheatmasstransfer.2018.06.085.

    CAS  Article  Google Scholar 

  34. 34.

    Malekan M, Khosravi A, Goshayeshi HR, Assad MEH, Garcia Pabon JJ. Thermal resistance modeling of oscillating heat pipes for nanofluids by artificial intelligence approach. J Heat Transf. 2019. https://doi.org/10.1115/1.4043569.

    Article  Google Scholar 

  35. 35.

    Ramezanizadeh M, Ahmadi MH, Nazari MA, Sadeghzadeh M, Chen L. A review on the utilized machine learning approaches for modeling the dynamic viscosity of nanofluids. Renew Sustain Energy Rev. 2019;114:109345. https://doi.org/10.1016/J.RSER.2019.109345.

    CAS  Article  Google Scholar 

  36. 36.

    Zendehboudi A, Li X. Robust predictive models for estimating frost deposition on horizontal and parallel surfaces. Int J Refrig. 2017;80:225–37. https://doi.org/10.1016/J.IJREFRIG.2017.05.013.

    Article  Google Scholar 

  37. 37.

    Goh ATC. Back-propagation neural networks for modeling complex systems. Artif Intell Eng. 1995;9:143–51. https://doi.org/10.1016/0954-1810(94)00011-S.

    Article  Google Scholar 

  38. 38.

    Ghalandari M, Fard HF, Birjandi AK, Mahariq I. Energy-related carbon dioxide emission forecasting of four European countries by employing data-driven methods. J Therm Anal Calorim 2020.

  39. 39.

    Heydarian R, Shafii MB, Rezaee Shirin-Abadi A, Ghasempour R, Alhuyi NM. Experimental investigation of paraffin nano-encapsulated phase change material on heat transfer enhancement of pulsating heat pipe. J Therm Anal Calorim. 2019;137:1603–13. https://doi.org/10.1007/s10973-019-08062-6.

    CAS  Article  Google Scholar 

  40. 40.

    Mohammadi M, Mohammadi M, Shafii MB. Experimental investigation of a pulsating heat pipe using ferrofluid (magnetic nanofluid). J Heat Transf. 2012;134:014504. https://doi.org/10.1115/1.4004805.

    CAS  Article  Google Scholar 

  41. 41.

    Gandomkar A, Kalan K, Vandadi M, Shafii MB, Saidi MH. Investigation and visualization of surfactant effect on flow pattern and performance of pulsating heat pipe. J Therm Anal Calorim. 2020;139:2099–107. https://doi.org/10.1007/s10973-019-08649-z.

    CAS  Article  Google Scholar 

  42. 42.

    Gandomkar A, Saidi MH, Shafii MB, Vandadi M, Kalan K. Visualization and comparative investigations of pulsating ferro-fluid heat pipe. Appl Therm Eng. 2017;116:56–65. https://doi.org/10.1016/J.APPLTHERMALENG.2017.01.068.

    CAS  Article  Google Scholar 

  43. 43.

    Riehl RR, Dos SN. Water-copper nanofluid application in an open loop pulsating heat pipe. Appl Therm Eng. 2012;42:6–10. https://doi.org/10.1016/j.applthermaleng.2011.01.017.

    CAS  Article  Google Scholar 

Download references

Acknowledgements

This study was supported by Natural Science Foundation of Zhejiang Province (No. LY20F020018).

Author information

Affiliations

Authors

Corresponding author

Correspondence to Junqin Wen.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Wen, J. Thermal resistance modeling of oscillating heat pipes filled with acetone by using artificial neural network. J Therm Anal Calorim (2021). https://doi.org/10.1007/s10973-020-10536-x

Download citation

Keywords

  • Oscillating heat pipe
  • Thermal resistance
  • Artificial neural network
  • GMDH