Skip to main content
SpringerLink
Log in

Influence of hierarchical porous structures on the mechanical properties of cellulose aerogels

  • Original Paper: Nano- and macroporous materials (aerogels, xerogels, cryogels, etc.)
  • Published:
Journal of Sol-Gel Science and Technology Aims and scope Submit manuscript

Abstract

Aerogels of cellulose exhibit remarkable mechanical properties as a function of density. Modifying the pore volume in classical cellulose aerogels using sacrificial template methods provide scaffold like microstructure. In the present study, we have developed aerogels of cellulose scaffolds having almost same density values but differ in microstructure and analysed the influence on the mechanical properties of bulk materials. This study can give an insight into the materials design for advanced engineering materials. Employing four surfactants having difference in hydrophilic-lipophilic balance (HLB), namely polyoxyethylene tert-octylphenyl ether (PT), polyoxyethylene (20) oleyl ether (PO), polyoxyethylene (40) nonylphenyl ether (PN) and polyoxyethylene (100) stearyl ether (PS), the cellulose scaffolds with hierarchical porous structures were developed. The mechanical properties of cellulose scaffolds were compared with classical pure cellulose aerogels. The results indicate that the solid fraction of cellulose nanofibers per unit volume of cell walls of scaffolds plays an important role in determining the elastic properties and strength. As the nanofibrils support the cell walls of scaffolds, Young’s modulus can be improved if the concentration of cellulose nanofibers is high at the cell walls or cell wall thickness is larger. The scaffold materials of this kind could be used as supporting materials with desired properties for filter, catalysis and biomedicine.

Highlights

  • The aerogels of cellulose scaffolds with hierarchical porous structures were developed.

  • The hierarchical porous structures were designed by using four different surfactants.

  • The entrapped oil droplets in the cellulose matrix act as a structural template.

  • The solid fraction per unit volume of cell walls of scaffolds influences the mechanical property.

  • The structural design of pore channels play major role in defining the elastic property.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Wang S, Lu A, Zhang L (2016) Recent advances in regenerated cellulose materials. Prog Polym Sci 53:169–206

    Article  Google Scholar 

  2. Ratke L (2011) Monoliths and fibrous cellulose aerogels. In: Aegerter MA, Leventis N, Koebel MM (eds) Aerogels Handbook. Advances in Sol-Gel Derived Materials and Technologies. Springer, New York, p 173

  3. Budtova T, Navard P (2016) Cellulose in NaOH-water based solvents: a review. Cellulose 23:5–55

    Article  Google Scholar 

  4. Cai J, Kimura S, Wada M, Kuga S, Zhang L (2008) Cellulose aerogels from aqueous alkali hydroxide–urea solution. ChemSusChem 1:149–154

    Article  Google Scholar 

  5. Wan C, Lu Y, Jiao Y, Cao J, Sun Q, Li J (2015) Cellulose aerogels from cellulose–NaOH/PEG solution and comparison with different cellulose contents. Mater Sci Technol 31(9):1096–1102

    Article  Google Scholar 

  6. Rege A, Schestakow M, Karadagli I, Ratke L, Itskov M (2016) Micro-mechanical modelling of cellulose aerogels from molten salt hydrates. Soft Matter 12:7079–7088

    Article  Google Scholar 

  7. Schestakow M, Karadagli I, Ratke L (2016) Cellulose aerogels prepared from an aqueous zinc chloride salthydrate melt. Carbohydr Polym 137:642–649

    Article  Google Scholar 

  8. Hoepfner S, Ratke L, Milow B (2008) Synthesis and characterisation of nanofibrillar cellulose aerogels. Cellulose 15:121–129

    Article  Google Scholar 

  9. Jin H, Nishiyama Y, Wada M, Kuga S (2004) Nanofibrillar cellulose aerogels. Colloids Surf A: Physicochem Eng Asp 240:63–67

    Article  Google Scholar 

  10. Buchtová N, Budtova T (2016) Cellulose aero-, cryo- and xerogels: towards understanding of morphology control. Cellulose 23(4):2585–2595

    Article  Google Scholar 

  11. Pääkkö M, Vapaavuori J, Silvennoinen R, Kosonen H, Ankerfors M, Lindström T, Berglund LA, Ikkala O (2008) Long and entangled native cellulose I nanofibers allow flexible aerogels and hierarchically porous templates for functionalities. Soft Matter 4:2492–2499

    Article  Google Scholar 

  12. Li VC-F, Dunn CK, Zhang Z, Deng Y, Qi HJ (2017) Direct Ink Write (DIW) 3D printed cellulose nanocrystal aerogel structures. Sci Rep 7(1):8018

    Article  Google Scholar 

  13. Pircher N, Fischhuber D, Carbajal L, Strau C, Nedelec J-M, Kasper C, Rosenau T, Liebner F (2015) Preparation and reinforcement of dual-porous biocompatible cellulose scaffolds for tissue engineering. Macromol Mater Eng 300:911–924

    Article  Google Scholar 

  14. Ganesan K, Dennstedt A, Barowski A, Ratke L (2016) Design of aerogels, cryogels and xerogels of cellulose with hierarchical porous structures. Mater Des 92:345–355

    Article  Google Scholar 

  15. Deng M, Zhou Q, Du A, van Kasteren J, Wang Y (2009) Preparation of nanoporous cellulose foams from cellulose-ionic liquid solutions. Mater Lett 63(21):1851–1854

    Article  Google Scholar 

  16. Svagan AJ, Jensen P, Dvinskikh SV, Furó I, Berglund LA (2010) Towards tailored hierarchical structures in cellulose nanocomposite biofoams prepared by freezing/freeze-drying. J Mater Chem 20:6646–6654

    Article  Google Scholar 

  17. Gibson LJ, Ashby MF (1997) Cellular solids: structure and properties. Second edn. Cambridge University Press, United Kingdom

Download references

Author information

Authors and Affiliations

  1. Insitute of Materials Research, German Aerospace Center, Linder Hoehe, 51170, Cologne, Germany

    Kathirvel Ganesan, Adam Barowski, Lorenz Ratke & Barbara Milow

Authors
  1. Kathirvel Ganesan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Adam Barowski
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Lorenz Ratke
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Barbara Milow
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Kathirvel Ganesan.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Electronic supplementary material

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ganesan, K., Barowski, A., Ratke, L. et al. Influence of hierarchical porous structures on the mechanical properties of cellulose aerogels. J Sol-Gel Sci Technol 89, 156–165 (2019). https://doi.org/10.1007/s10971-018-4828-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10971-018-4828-2

Keywords

Search

Navigation