Abstract
Ecofriendly fully bio-composites based on polyamide 11 (PA11) and lignin have been prepared on the entire concentration range using a twin-screw extruder. In this work, PA11 was blended with lignin by direct extrusion technology without any chemical pre- or in-situ- modifications or physical pretreatments. The presence of various organic and inorganic impurities in the selected technical lignin have been maintained. The incorporation of this cheap renewable material from biomass in bio-based PA11 was inspected by an array of characterization tools. Also, the effect of the presence of lignin on the morphology and on the mechanical properties of the resulting materials was examined. Finally, in-situ investigation of structural evolution in PA11 induced by the presence of lignin was analyzed by Fast Scanning Chip Calorimetry.
Similar content being viewed by others
References
Niaounakis M (2015) Biopolymers: applications and trends. Elsevier, New York, 978-0-323-35399-1
Zierdt P, Theumer T, Kulkarni G, Däumlich V, Klehm J, Hirsch U, Weber A (2015) Sustain Mater Technol 6:6
Brebu M, Vasile C (2010) Cell Chem Technol 44:353
Delmas M (2008) Chem Eng Technol 31:792
Kamm B, Kamm M (2004) Appl Microbiol Biotechnol 64:137
Ragauskas AJ, Williams CK, Davison BH, Britovsek G, Cairney J, Eckert CA, Frederick WJ, Hallett JP, Leak DJ, Liotta CL, Mielenz JR, Murphy R, Templer R, Tschaplinski T (2006) Science 311:484
Brodin I, Ernstsson M, Gellerstedt G, Sjöholm E (2012) Holzforschung 66:141
Kadla JF, Kubo S (2003) Macromolecules 36:7803
Kadla JF, Kubo S, Venditti RA, Gilbert RD, Compere AL, CW Griffith (2002) Carbon 40:2913
Kubo S, Kadla JF (2005) J Polym Environ 13:97
Ramasubramanian G (2013) Graduate Theses and Dissertations. Paper 13438
Thunga M, Chen K, Grewell D, Kessler MR (2014) Carbon 68:159
Canetti M, Bertini F, De Chirico A, Audisio G (2006) Polym Degrad Stab 91:494
Dawson BSW, Singh AP, Kroese HW, Schwitzer MA, Gallagher S, Riddiough SJ, Wu SHJ (2008) J Coat Technol Res 5:193
Ismail T, Abu Hassan H, Hirose S, Taguchi Y, Hatakeyama T, Hatakeyama H (2010) Polym Int 59:181
Košíková B, Gregorová A, Osvald A, Krajcŏvicŏva J (2007) J Appl Polym Sci 103:1226
Li J, He Y, Inoue Y (2003) Polym Int 52:949
Pouteau C, Dole P, Cathala B, Averous L, Boquillon N (2003) Polym Degrad Stab 81:9
Saito T, Brown RH, Hunt MA, Pickel DL, Pickel JM, Messman JM, Baker FS, Keller MA, Naskar K (2012) Green Chem 14:3295
Alexy P, Košíková B, Podstránska G (2000) Polymer 41:4901
Kubo S, Kadla JF (2005) Biomacromolecules 6:2815
Laurichesse S, Avérous L (2014) Progress in Polym Sci 39:1266
Sadeghifar H, Cui C, Argyropoulos DS (2012) Ind Eng Chem Res 51:16713
Sailaja RRN, Deepthi MV (2010) Mater Des 31:4369
Mousavioun P, Doherty WOS, George G (2010) Ind Crops Prod 32:656
Rahman MA, De Santis D, Spagnoli G, Ramorino G, Penco M, Phuong VT, Lazzeri A (2013) J Appl Polym Sci https://doi.org/10.1002/APP.38705
Nitz H, Semke H, Mülhaupt R (2001) Macromol Mater Eng 286:737
Kolesov I, Androsh R, Mileva D, Lebek W, Benhamida A, Kaci M, Focke W (2013) Colloid Polym Sci 291:2541
Mollova A, Androsch R, Mileva D, Schick C, Benhamida A (2013) Macromolecules 46:828
Stoclet G, Sclavons M, Devaux J (2013) J Appl Polym Sci https://doi.org/10.1002/APP.38053
Zhang G, Li Y, Yan D (2004) J Polym Sci Part B Polym Phys 42:253
Carlier V, Sclavons M, Legras R (2001) Polymer 42:5327
Kubo S, Kadla JF (2005) J Appl Polym Sci 98:1437
Kubo S, Kadla JF (2004) Macromolecules 37:6904
Sallem-Idrissi N, Vanderghem C, Pacary T, Richel A, Debecker DP, Devaux J, Sclavons M (2016) J Appl Polym Sci https://doi.org/10.1002/APP.42963
Sahoo S, Seydibeyoglu M, Mohanty AK, Misra M (2011) Biomass Bioenergy 35:4230
Mishra SB, Mishra AK, Kaushik NK, Khan MA (2007) J Mater Process Technol 183:273
Paul DR, Bucknall CB (2000) Polymer blends: formulation and performance, 1. John Wiley & Sons, Hoboken, pp 539–579
Woo EM, Wu MN (1996) Polymer 37:907
Schawe JEK (1998) J Polym Sc Part B Polym Phys 36:2165
Schawe JEK (2002) Elastomers Collected applications thermal analysis, 1. Mettler Toledo, Columbus, pp 35–46
Bittencourt PRS, Fernandes DM, Silva MF, Lima MK, Hechenleitner AAW, Pineda EAG (2010) Waste Biomass Valor 1:323
Stoclet G, Seguela R, Lefebvre J-M (2011) Polymer 52:1417
Zhang Q, Yu M, Fu Q (2004) Polym Int 53:1941
Wu M, Yang G, Wang M, Wang W, Zhang W-D, Feng J, Liu T (2008) Mater Chem Phys 109:547
Reckinger C, Rault J (1986) Revue Phys Appl 21:11
Acknowledgements
The authors acknowledge the support from Walloon Region (DEXPLIMAR Project No. 6758).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sallem-Idrissi, N., Van Velthem, P. & Sclavons, M. Fully Bio-Sourced Nylon 11/Raw Lignin Composites: Thermal and Mechanical Performances. J Polym Environ 26, 4405–4414 (2018). https://doi.org/10.1007/s10924-018-1311-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10924-018-1311-7