The process of ignition of the solid fuel from glycidyl azide polymer in the mini-engine of a microelectromechanical system has been considered. Macrokinetic calculations of the self-ignition temperature of the fuel and the induction period for different heat transfer conditions have been made. On the basis of the critical thermal flux determination, recommendations on the choice of the minimum power and size of the thermistor in the igniter of the solid-fuel mini-engine have been formulated.
Similar content being viewed by others
References
D. H. Lewis Jr., S. W. Janson, R. B. Cohen, and E. K. Antonsson, Digital micropropulsion, Sensors and Actuators A, 80, 143–154 (2000).
C. Rossi, D. Mehdi, and D. Estéve, Pyrotechnic actuator: a new generation of Si integrated actuator, Sensors and Actuators A, 74, 211–215 (1999).
K. V. Puduppakkam and M. W. Beckstead, Combustion modeling of glycidyl azide polymer with detailed kinetics, Combust. Sci. Techhol., 177, 1661–1697 (2005).
S. I. Fut’ko, E. M. Ermolaeva, K. V. Dobrego, V. P. Bondarenko, and L. N. Dolgii, Thermodynamic analysis of solid-fuel mixtures glycidyl azide polymer(GAP)/RDX for mini-engines of microelectromechanical systems, Inzh.-Fiz. Zh., 84, No. 5, 990–995 (2011).
D. A. Frank-Kamenetskii, Diffusion and Heat Transfer in Chemical Kinetics [in Russian], Nauka, Moscow (1987).
S. I. Fut’ko, E. M. Ermolaeva, and K. V. Dobrego, Calculation of the pulse response of the mini-engine of electromechanical solid-fuel systems, in: Heat and Mass Transfer-2011, A. V. Luikov Heat and Mass Transfer Instutite Press, Minsk (2011), pp. 1–5.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 84, No. 6, pp. 1213–1218, November–December, 2011.
Rights and permissions
About this article
Cite this article
Fut’ko, S.I., Ermolaeva, E.M., Dobrego, K.V. et al. Macrokinetic calculation of the ignition of a solid-fuel charge of glycidyl azide polymer in the mini-engine of a microelectromechanical system. J Eng Phys Thermophy 84, 1304–1310 (2011). https://doi.org/10.1007/s10891-011-0598-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-011-0598-1