Journal of Engineering Physics and Thermophysics

, Volume 79, Issue 6, pp 1202–1207 | Cite as

Process of deposition of a material on the surface of a rotating body

  • M. G. Kiselev
  • D. A. Stepanenko


A mathematical model for estimating the thickness of a coating deposited on the surface of a rotating body having a circular symmetry is proposed. A method has been developed for determining the law of control of the mass flow of a deposited material for the purpose of obtaining coatings homogeneous in thickness. It is shown that, in the case of deposition of a coating on the surface of a circular disk, the optimum mass flow of a deposited material is defined by a linear function.


Mass Flow Superhard Material Circular Disk Diamond Particle Diamond Single Crystal 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    V. I. Epifanov, A. Ya. Pesina, and L. V. Zykov, The Practice of Cutting Diamonds [in Russian], Vysshaya Shkola, Moscow (1982).Google Scholar
  2. 2.
    M. G. Kiselev and D. A. Stepanenko, Theoretical investigation of the laws of distribution of diamond particles over the surface of a cutting disk in the process of their deposition by spraying, Teor. Prakt. Mashinostr., No. 1, 34–38 (2005).Google Scholar
  3. 3.
    J. G. Goejen, R. A. Miller, W. J. Brindley, and G. W. Leissler, A simulation technique for predicting thickness of thermal sprayed coatings, NASA Technical Memorandum TM-106939 (1995).Google Scholar
  4. 4.
    A. Hansbo and P. Nylén, Models for the simulation of spray deposition and robot motion optimization in thermal spraying of rotating objects, Surface Coatings Technol., 122, 191–201 (1999).CrossRefGoogle Scholar
  5. 5.
    D. C. Conner, A. Greenfield, P. N. Atkar, A. A. Rizzi, and H. Choset, Paint deposition modeling for trajectory planning on automotive surfaces, IEEE Trans. Automation Sci. Eng., 2, No. 4, 381–392 (2005).CrossRefGoogle Scholar
  6. 6.
    M. P. Portnov, V. I. Epifanov, and V. I. Kononenko, An Apparatus for Charging of Disks, USSR Authors’s Certificate No. 360213. MKI V24V 57/100. Published on 28.11.1972, Byull. Izobr., No. 36 (1972).Google Scholar
  7. 7.
    M. T. Ensz, M. L. Griffith, and D. E. Reckaway, Critical issues for functionally graded material deposition by laser engineered net shaping.

Copyright information

© Springer Science+Business Media, Inc. 2006

Authors and Affiliations

  • M. G. Kiselev
    • 1
  • D. A. Stepanenko
    • 1
  1. 1.Belarusian State Technical UniversityMinskBelarus

Personalised recommendations