Advertisement

Journal of Materials Science: Materials in Electronics

, Volume 29, Issue 24, pp 20546–20553 | Cite as

Modification of tape casting slurry via effective plasticization by butyl benzyl phthalate of CaO–SiO2–B2O3 glass–ceramics

  • Miao Xin
  • Liming Zhang
  • Yi Chang
  • Luchao Ren
  • Xianfu Luo
  • Hongqing ZhouEmail author
Review
  • 196 Downloads

Abstract

This present work aimed to attain a high-performance tape for LTCC application by using butyl benzyl phthalate as plasticizer in tape casting slurry of CaO–SiO2–B2O3 glass–ceramics. The plasticizing mechanism of butyl benzyl phthalate in suspensions was demonstrated in depth. Dried droplets of binder were prepared to preliminarily judge the compatibility of binder and plasticizer, and the optimal additive amount was determined by rheological characteristic. In addition, a series of qualitative and quantitative methods were carried out to assess the tensile strength and elongation of green tapes, microwave properties and densification of sintered bodies. The experimental results revealed that when the addition of BBP was up to 45 wt%, tape casting slurries had the optimal fluidity and green tapes obtained the excellent performance with density at 1.65 g/cm3, tensile strength at 1.43 MPa and elongation at 13.4%. Meanwhile, sintered bodies fired at 850 °C achieved the highest density at 2.42 g/cm3 with εr = 5.94 and tanδ = 10 × 10−4 at 10 GHz.

Notes

Acknowledgements

This work was supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD).

References

  1. 1.
    D. Thomas, P. Abhilash, M.T. Sebastian, J. Eur. Ceram. Soc. 33(1), 87 (2013)CrossRefGoogle Scholar
  2. 2.
    I.J. Induja, M.R. Varma, M.T. Sebastian, J. Mater. Sci. Mater. Electron. 28(19), 14655 (2017)CrossRefGoogle Scholar
  3. 3.
    S. Kemethmuller, M. Hagymasi, A. Stiegelschmitt et al., J. Am. Ceram. Soc. 90(1), 64 (2007)CrossRefGoogle Scholar
  4. 4.
    H.Y. Wang, H. Su, Y.M. Lai et al., J. Mater. Sci. Mater. Electron. 28(19), 14190 (2017)CrossRefGoogle Scholar
  5. 5.
    K.M. Manu, S. Ananthakumar, M.T. Sebastian, Ceram. Int. 39(5), 4945 (2013)CrossRefGoogle Scholar
  6. 6.
    X.F. Luo, L.C. Ren, W.T. Xie et al., J. Mater. Sci. Mater. Electron. 27(5), 5446 (2016)CrossRefGoogle Scholar
  7. 7.
    X.H. Zhou, E.Z. Li, S.L. Yang et al., Ceram. Int. 38(7), 5551 (2012)CrossRefGoogle Scholar
  8. 8.
    S. Chen, S.R. Zhang, X.H. Zhou et al., J. Mater. Sci. Mater. Electron. 22(3), 238 (2011)CrossRefGoogle Scholar
  9. 9.
    Y.S. Xia, Y.K. Hu, L.C. Ren et al., J. Eur. Ceram. Soc. 38(1), 253 (2018)CrossRefGoogle Scholar
  10. 10.
    M. Jabbari, R. Bulatova, A.I.Y. Tok et al., Mater. Sci. Eng. B 212, 39 (2016)CrossRefGoogle Scholar
  11. 11.
    L.C. Ren, X.F. Luo, W.T. Xie et al., J. Mater. Sci. Mater. Electron. 27(9), 9877 (2016)CrossRefGoogle Scholar
  12. 12.
    R.A. Cutler, B. Kleinlein, J. Eur. Ceram. Soc. 29(15), 3211 (2009)CrossRefGoogle Scholar
  13. 13.
    M. Liu, H.Q. Zhou, H.K. Zhu et al., J. Cent. South. Univ. 20(1), 37 (2013)CrossRefGoogle Scholar
  14. 14.
    K. Prabhakaran, A. Narayanan, C. Pavithran, J. Eur. Ceram. Soc. 21(16), 2873 (2001)CrossRefGoogle Scholar
  15. 15.
    D.H. Kim, K.Y. Lim, U. Paik et al., J. Eur. Ceram. Soc. 24(5), 733 (2004)CrossRefGoogle Scholar
  16. 16.
    I.J. Indujaa, P. Abhilasha, S. Arun et al., Ceram. Int. 41(10), 13572 (2015)CrossRefGoogle Scholar
  17. 17.
    L.C. Ren, X.F. Luo, Y.S. Xia et al., J. Eur. Ceram. Soc. 37(16), 2415 (2017)CrossRefGoogle Scholar
  18. 18.
    W. Schafbauer, N.H. Menzler, H.P. Buchkremer, Int. J. Appl. Ceram. Technol. 11(1), 125 (2014)CrossRefGoogle Scholar
  19. 19.
    S. Foghmoes, F. Teocoli, K. Brodersen et al., J. Eur. Ceram. Soc. 36(14), 3441 (2016)CrossRefGoogle Scholar
  20. 20.
    Z.J. Qing, B. Li, T.X. Li et al., J. Mater. Sci. Mater. Electron. 26(3), 1512 (2015)CrossRefGoogle Scholar
  21. 21.
    A. Dubault, L. Bokobza, E. Gandin et al., Polym. Int. 52(7), 1108 (2003)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • Miao Xin
    • 1
    • 2
  • Liming Zhang
    • 1
    • 2
  • Yi Chang
    • 1
    • 2
  • Luchao Ren
    • 1
    • 2
  • Xianfu Luo
    • 1
    • 2
  • Hongqing Zhou
    • 1
    • 2
    Email author
  1. 1.College of Materials Science and EngineeringNanjing Tech UniversityNanjingChina
  2. 2.Jiangsu Collaborative Innovation Center for Advanced Inorganic Function CompositesNanjing Tech UniversityNanjingChina

Personalised recommendations