Journal of Materials Science: Materials in Electronics

, Volume 26, Issue 9, pp 6373–6379 | Cite as

Flexible carbon cloth based polypyrrole for an electrochemical supercapacitor



Making use of ferric chloride or ammonium persulfate as oxidant, pyrrole was polymerized on the surface of flexible carbon cloth. The composite samples were characterized by scanning and transmission electron microscopy, X-ray powder diffraction, fourier transform infrared spectra, cyclic voltammetry and galvanostatic charge–discharge techniques. With other reaction conditions the same, when different oxidant was used, different morphology of polypyrrole was obtained on the surface of carbon cloth. Through comparing the electrochemical properties of the two products, carbon cloth electrode modified by polypyrrole with superior performance was obtained using ferric chloride as oxidant. The electrochemical measurements showed that the modified carbon cloth electrode with superior performance had a wide working potential window, a high specific capacitance of 603 F g−1 and excellent cycle stability at a discharge current density of 1 A g−1.


Specific Capacitance Carbon Cloth Ferric Chloride Polypyrrole Cyclic Voltammetry Curve 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.



This work was supported by State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Natural Science Foundation of P. R. China (Item No. 61374218).

Conflict of interest

We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted.

Ethical standard

This research has fully complied with the rules of good scientific practice mentioned in the ethical responsibilities of authors.


  1. 1.
    L.L. Zhang, S.S. Zhao, Carbon-based materials as supercapacitor electrodes. Chem. Soc. Rev. 38, 2520–2531 (2009)CrossRefGoogle Scholar
  2. 2.
    G.A. Snook, C. Peng, D.J. Fray et al., Achieving high electrode specific capacitance with materials of low mass specific capacitance: potentiostatically grown thick micro-nanoporous PEDOT films. Electrochem. Commun. 9, 83–88 (2007)CrossRefGoogle Scholar
  3. 3.
    J.A. Lee, M.K. Shin, S.H. Kim et al., Hybrid nanomembranes for high power and high energy density supercapacitors and their yarn application. ACS Nano 6, 327–334 (2012)CrossRefGoogle Scholar
  4. 4.
    M. Fabretto, K. Zuber, C. Hall et al., The role of water in the synthesis and performance of vapour phase polymerized PEDOT electrochromic devices. J. Mater. Chem. 19, 7871–7878 (2009)CrossRefGoogle Scholar
  5. 5.
    A. Laforgue, All-textile flexible supercapacitors using electrospun poly(3,4-ethylenedioxythiophene) nanofibers. J. Power Sources 196, 559–564 (2011)CrossRefGoogle Scholar
  6. 6.
    W. Sun, X. Chen, Preparation and characterization of polypyrrole films for three-dimensional micro supercapacitor. J. Power Sources 193, 924–929 (2009)CrossRefGoogle Scholar
  7. 7.
    J. Wei, G. Xing, L. Gao et al., Nickel foam based polypyrrole–Ag composite film: a new route toward stable electrodes for supercapacitors. New J. Chem. 37, 337–341 (2013)CrossRefGoogle Scholar
  8. 8.
    J. Wei, S. Wei, G. Wang et al., PPy modified titanium foam electrode with high performance for supercapacitor. Eur. Polym. J. 49, 3651–3656 (2013)CrossRefGoogle Scholar
  9. 9.
    J. Wang, Y. Xu, J. Zhu et al., Electrochemical in situ polymerization of reduced grapheme oxide/polypyrrole composite with high power density. J. Power Sources 208, 138–143 (2012)CrossRefGoogle Scholar
  10. 10.
    B.C. Kim, C.O. Too, J.S. Kwon et al., A flexible capacitor based on conducting polymer electrodes. Synth. Met. 161, 1130–1132 (2011)CrossRefGoogle Scholar
  11. 11.
    M. Nakayama, J. Yano, K. Nakaoka et al., Electrodeposition of composite films consisting of polypyrrole and mesoporous silica. Synth. Met. 128, 57–62 (2002)CrossRefGoogle Scholar
  12. 12.
    T. Kobayashi, H. Yoneyama, H. Tamura, Polyaniline filmcoatedelectrodes as electrochromic display devices. J. Electroanal. Chem. 161, 419–423 (1984)CrossRefGoogle Scholar
  13. 13.
    S. Geetha, D.C. Trivedi, Studies on polypyrrole film in roomtemperature melts. Mater. Chem. Phys. 88, 388–397 (2004)CrossRefGoogle Scholar
  14. 14.
    M.F. El-Kady, R.B. Kaner, Scalable fabrication of high-power grapheme microsupercapacitors for flexible and on-chip energy storage. Nat. Commun. 4, 1475 (2013)CrossRefGoogle Scholar
  15. 15.
    H. Nishide, K. Oyaizu, Toward flexible batteries. Science 319, 737–738 (2008)CrossRefGoogle Scholar
  16. 16.
    J.H. Sung, S.J. Kim et al., Flexible micro-supercapacitors. J. Power Sources 162, 1467–1470 (2006)CrossRefGoogle Scholar
  17. 17.
    Y.C. Chen, Y.K. Hsu, Y.G. Lin et al., Highly flexible supercapacitors with manganese oxide nansheet/carbon cloth electrode. Electrochim. Acta 56, 7124–7130 (2011)CrossRefGoogle Scholar
  18. 18.
    Y.K. Hsu, Y.C. Chen, Y.G. Lin et al., Direct-growth of poly(3,4-ethylenedioxythiophene) nanowires/carbon cloth as hierarchical supercapacitor electrode in neutral aqueous solution. J. Power Sources 242, 718–724 (2013)CrossRefGoogle Scholar
  19. 19.
    C. Ma, X. Wang, Y. Ma et al., Carbon nanofiber/grapheme composite paper for flexible supercapacitors with high volumetric capacitance. Mater. Lett. 145, 197–200 (2015)CrossRefGoogle Scholar
  20. 20.
    R.A. Davoglio, S.R. Biaggio, N. Bocchi et al., Flexible and high surface area composites of carbon fiber, polypyrrole, and poly(EMcT) for supercapacitor electrodes. Electrochim. Acta 93, 93–100 (2013)CrossRefGoogle Scholar
  21. 21.
    X. He, G. Bo, G. Wang et al., A new nanocomposite: carbon cloth based polyaniline for an electrochemical supercapacitor. Electrochim. Acta 111, 210–215 (2013)CrossRefGoogle Scholar
  22. 22.
    L. Wang, X. Feng, L. Ren et al., Flexible solid-state supercapacitor based on a meta-organic framework interwoven by electrochemically-deposited PANI. J. Am. Chem. Soc. 137, 4920–4923 (2015)CrossRefGoogle Scholar
  23. 23.
    S. Wei, P. Mavinakuli, Q. Wang et al., Polypyrrole-titania nanocomposites derived from different oxidants. J. Electrochem. Soc. 158, K205–K212 (2011)CrossRefGoogle Scholar
  24. 24.
    Y. Xia, J. Yang, One-step fabrication of hierarchical polypyrrole microspheres with nanofibers as building blocks. Synth. Met. 160, 1688–1691 (2010)CrossRefGoogle Scholar
  25. 25.
    L. Qie, L.X. Yuan, W.X. Zhang et al., Revisit of polypyrrole as cathode material for lithium-ion battery. J. Electrochem. Soc. 159, A1624–A1629 (2012)CrossRefGoogle Scholar
  26. 26.
    A.K. Mishra, S. Ramaprabhu, Functionalized grapheme-based nanocomposites for supercapacitor application. J. Phys. Chem. C 115, 14006–14013 (2011)CrossRefGoogle Scholar
  27. 27.
    R.K. Sharma, A.C. Rastogi, S.B. Desu, Manganese oxide embedded polypyrrole nanocomposites for electrochemical surpercapacitor. Electrochim. Acta 53, 7690–7695 (2008)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 2015

Authors and Affiliations

  1. 1.State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and EngineeringJilin UniversityChangchunPeople’s Republic of China
  2. 2.Department of Resources and EnvironmentJilin Agriculture UniversityChangchunPeople’s Republic of China

Personalised recommendations