Skip to main content
SpringerLink
Log in

Effect of rare earth surface modification of carbon nanotubes on enhancement of interfacial bonding of carbon nanotubes reinforced epoxy matrix composites

  • Composites
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Rare earth (RE) lanthanum chloride was used to modify carbon nanotubes (CNTs) to obtain rare earth modified carbon nanotubes (RECNTs). The modified CNTs were characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The results show that RE has a significant effect on improving the surface activity of carbon nanotubes. Through the chemical function of RE, the CNTs were successfully grafted with functional groups such as amino groups and carboxyl groups. This method can be used to connect any oxygen- or nitrogen-containing functional groups to the CNTs according to actual needs. Then, the modified CNTs were incorporated into epoxy resin (EP) to prepare composite (REACNTs/EP). The mechanical properties of the composites were tested by Zwick/Roell Z100 and Zwick/Roell Z20 test machine, and the tensile fractural sections were analyzed by scanning electron microscopy, and compared to the composites prepared with untreated CNTs (CNTs/EP), acidified carbon nanotubes (ACNTs/EP), acidification and RE synergistic modification of carbon nanotubes (REACNTs/EP). The results show that the ultimate tensile strength and tensile modulus of RECNTs/EP were increased by 33.9%, 73.7%, respectively, compared with pure EP, while the properties of REACNTs/EP were increased by 50.7%, 90.9%, indicating that RE has excellent effect on improving the mechanical properties of carbon nanotube-reinforced composites.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8

Similar content being viewed by others

References

  1. Xie S, Li W, Pan Z, Chang B, Sun L (2000) Mechanical and physical properties on carbon nanotube. J Phys Chem Solids 61(7):1153–1158

    Article  Google Scholar 

  2. Oberlin A, Endo M, Koyama T (1976) High resolution electron microscope observations of graphitized carbon fibers. Carbon 14(2):133–135

    Article  Google Scholar 

  3. Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354(6348):56–58

    Article  Google Scholar 

  4. Volder MFLD, Tawfick SH, Baughman RH, Hart AJ (2013) Carbon nanotubes: present and future commercial applications. Science 339(6119):535–539

    Article  Google Scholar 

  5. Lu S, Guo Z, Ding W, Dikin DA, Lee J, Ruoff RS (2006) In situ mechanical testing of templated carbon nanotubes. Rev Sci Instrum 77(12):1192–1429

    Article  Google Scholar 

  6. Bei P, Mark L, Peter Z, Shuyou L, Mielke SL, Schatz GC, Espinosa HD (2008) Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements. Nat Nanotechnol 3(10):626–631

    Article  Google Scholar 

  7. Gyu PJ, Jeffrey L, Qunfeng C, Jianwen B, Jesse S, Richard L, Ben W, Chuck Z, Brooks JS, Leslie K (2009) Electromagnetic interference shielding properties of carbon nanotube buckypaper composites. Nanotechnology 20(41):415702

    Article  Google Scholar 

  8. Byrne MT, Gun’Ko YK (2010) Recent advances in research on carbon nanotube-polymer composites. Adv Mater 22(15):1672–1688

    Article  Google Scholar 

  9. Wetzel B, Rosso P, Haupert F, Friedrich K (2006) Epoxy nanocomposites—fracture and toughening mechanisms. Eng Fract Mech 73(16):2375–2398

    Article  Google Scholar 

  10. Jin AK, Dong GS, Kang TJ, Youn JR (2006) Effects of surface modification on rheological and mechanical properties of CNT/epoxy composites. Carbon 44(10):1898–1905

    Article  Google Scholar 

  11. Domun N, Hadavinia H, Zhang T, Sainsbury T, Liaghat GH, Vahid S (2015) Improving the fracture toughness and the strength of epoxy using nanomaterials–a review of the current status. Nanoscale 7(23):10294–10329

    Article  Google Scholar 

  12. Li Y, Huang X, Zeng L, Li R, Tian H, Fu X, Wang Y, Zhong WH (2019) A review of the electrical and mechanical properties of carbon nanofiller-reinforced polymer composites. J Mater Sci 54:1036–1076. https://doi.org/10.1007/s10853-018-3006-9

    Article  Google Scholar 

  13. Zhu J, Kim JD, Peng H, Margrave JL, Khabashesku VN, Barrera EV (2003) Improving the dispersion and integration of single-walled carbon nanotubes in epoxy composites through functionalization. Nano Lett 3(8):1107–1113

    Article  Google Scholar 

  14. Tang LC, Zhang H, Han JH, Wu XP, Zhang Z (2012) Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes. Compos Sci Technol 72(1):7–13

    Article  Google Scholar 

  15. Wei W, Isaac R, Ilkeun L, Francisco Z, Mihrimah O, Ozkan CS (2015) Improved functionality of graphene and carbon nanotube hybrid foam architecture by UV-ozone treatment. Nanoscale 7(16):7045–7050

    Article  Google Scholar 

  16. Hsieh TH, Kinloch AJ, Taylor AC, Sprenger S (2010) The effect of silica nanoparticles and carbon nanotubes on the toughness of a thermosetting epoxy polymer. J Appl Polym Sci 119(4):2135–2142

    Article  Google Scholar 

  17. Zhu J, Peng HQ, Rodriguez-Macias F, Margrave JL, Khabashesku VN, Imam AM, Lozano KE, Barrera EV (2010) Reinforcing epoxy polymer composites through covalent integration of functionalized nanotubes. Adv Funct Mater 14(7):643–648

    Article  Google Scholar 

  18. Lei X, Feng Z, Liang H, Liang C, Lan D (2018) Chemical grafting of nano-TiO2 onto carbon fiber via thiol–ene click chemistry and its effect on the interfacial and mechanical properties of carbon fiber/epoxy composites. J Mater Sci 53(4):2594–2603. https://doi.org/10.1007/s10853-017-1739-5

    Article  Google Scholar 

  19. Cheng Y, Huang J, Qi H, Cao L, Luo X, Li J, Xu Z, Yang J (2017) Controlling the Sn–C bonds content in SnO2@CNTs composite to form in situ pulverized structure for enhanced electrochemical kinetics. Nanoscale 9(47):18681–18689

    Article  Google Scholar 

  20. Suh D, Moon CM, Kim D, Baik S (2016) Ultrahigh thermal conductivity of interface materials by silver-functionalized carbon nanotube phonon conduits. Adv Mater 28(33):7220–7227

    Article  Google Scholar 

  21. Yuan W, Feng J, Judeh Z, Dai J, Chan-Park MB (2010) Use of polyimide-graft-bisphenol a diglyceryl acrylate as a reactive noncovalent dispersant of single-walled carbon nanotubes for reinforcement of cyanate ester/epoxy composite. Chem Mater 22(24):6542–6554

    Article  Google Scholar 

  22. Pulikkathara MX, Kuznetsov OV, Khabashesku VN (2008) Sidewall covalent functionalization of single wall carbon nanotubes through reactions of fluoronanotubes with urea, guanidine, and thiourea. Chem Mater 20(8):2685–2695

    Article  Google Scholar 

  23. Kang NG, Lu X, Hiremath N, Hong K, Evora M, Ranson V, Naskar A, Bhat G, Mays J (2017) Improving mechanical properties of carbon nanotube fibers through simultaneous solid-state cycloaddition and crosslinking. Nanotechnology 28(14):145603–145612

    Article  Google Scholar 

  24. Menezes BRCD, Ferreira FV, Silva BC, Simonetti EAN, Bastos TM, Cividanes LS, Thim GP (2018) Effects of octadecylamine functionalization of carbon nanotubes on dispersion, polarity, and mechanical properties of CNT/HDPE nanocomposites. J Mater Sci 53(9):1–17. https://doi.org/10.1007/s10853-018-2627-3

    Google Scholar 

  25. Li Y, Li R, Fu X, Yu W, Zhong WH (2018) A bio-surfactant for defect control: multifunctional gelatin coated MWCNTs for conductive epoxy nanocomposites. Compos Sci Technol 159:216–224

    Article  Google Scholar 

  26. Sabet SM, Mahfuz H, Terentis AC, Nezakat M, Hashemi J (2018) Effects of POSS functionalization of carbon nanotubes on microstructure and thermomechanical behavior of carbon nanotube/polymer nanocomposites. J Mater Sci 53(12):8963–8977. https://doi.org/10.1007/s10853-018-2182-y

    Article  Google Scholar 

  27. Li Y, Huang X, Zeng L, Li R, Tian H, Fu X, Wang Y, Zhong WH (2019) A review of the electrical and mechanical properties of carbon nanofiller-reinforced polymer composites. J Mater Sci 54(2):1036–1076. https://doi.org/10.1007/s10853-018-3006-9

    Article  Google Scholar 

  28. Wang D, Zhang J, Quan L, Fu L, Zhang H, Bai Y (2003) Lanthanide complex/polymer composite optical resin with intense narrow band emission, high transparency and good mechanical performance. J Mater Chem 13(9):2279–2284

    Article  Google Scholar 

  29. Pan L, Huang X, Li J (2000) Novel single- and double-layer and three-dimensional structures of rare-earth metal coordination polymers: the effect of lanthanide contraction and acidity control in crystal structure formation. Angew Chem Int Ed 39(3):527–530

    Article  Google Scholar 

  30. Datsyuk V, Kalyva M, Papagelis K, Parthenios J, Tasis D, Siokou A, Kallitsis I, Galiotis C (2008) Chemical oxidation of multiwalled carbon nanotubes. Carbon 46(6):833–840

    Article  Google Scholar 

  31. Lebedkin S, Arnold K, Hennrich F, Krupke R, Renker B, Kappes MM (2003) FTIR-luminescence mapping of dispersed single-walled carbon nanotubes. New J Phys 5(1):140

    Article  Google Scholar 

  32. Stobinski L, Lesiak B, Kövér L, Tóth J, Biniak S, Trykowski G, Judek J (2015) Multiwall carbon nanotubes purification and oxidation by nitric acid studied by the FTIR and electron spectroscopy methods. J Alloys Compd 501(1):77–84

    Article  Google Scholar 

  33. Muilenberg GE (1979) Handbook of X-ray photoelectron spectroscopy. Perkin-Elmer Corporation, Waltham, p 64

    Google Scholar 

  34. Lee TH, Rabalais JW (1977) X-ray photoelectron spectra and electronic structure of some diamine compounds. J Electron Spectrosc Relat Phenom 11(1):123–127

    Article  Google Scholar 

  35. Novosselov A, Talik E, Pajaczkowska A (2003) An X-ray photoelectron spectroscopy study on electron structure of some Ln-containing (Ln = La, Pr, Nd and Gd) oxide crystals. J Alloys Compd 351(1):50–53

    Article  Google Scholar 

  36. Sun Z, Cheng X (2015) Investigation of carbon nanotube-containing film on silicon substrates and its tribological behavior. Appl Surf Sci 355(1):272–278

    Article  Google Scholar 

Download references

Acknowledgements

This project was supported by The Tribology Science Fund of State Key Laboratory of Tribology (No. SKLTKF17A02) and the analytical testing was provided by Instrumental Analysis Center of Shanghai Jiao Tong University (iac.sjtu.edu.cn) and Shiyanjia test center (www.shiyanjia.com).

Author information

Authors and Affiliations

  1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, People’s Republic of China

    M. R. Jiang, Hua Zhou & X. H. Cheng

  2. College of Information, Mechanical and Electronic Engineering, Shanghai Normal University, Shanghai, 201418, People’s Republic of China

    Hua Zhou

  3. State Key Laboratory of Tribology, Tsinghua University, Beijing, 100084, People’s Republic of China

    X. H. Cheng

Authors
  1. M. R. Jiang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Hua Zhou
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. X. H. Cheng
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to X. H. Cheng.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jiang, M.R., Zhou, H. & Cheng, X.H. Effect of rare earth surface modification of carbon nanotubes on enhancement of interfacial bonding of carbon nanotubes reinforced epoxy matrix composites. J Mater Sci 54, 10235–10248 (2019). https://doi.org/10.1007/s10853-019-03631-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-019-03631-4

Search

Navigation