Advertisement

Journal of Materials Science

, Volume 53, Issue 14, pp 10013–10024 | Cite as

Interfacial liquid phase-driven removal of copper ions for bioavailable hyperbranched polytriazoles

  • Qingfu Ban
  • Qiang Zhuang
  • Kehe Su
  • Si Wu
  • Jie Kong
Chemical routes to materials
  • 200 Downloads

Abstract

The existence of toxic Cu ions in the products synthesized by Cu(I)-catalyzed azide–alkyne cycloaddition (CuAAC) click chemistry hinders biomedical applications of these products. Cu ions are difficult to remove because stable Cu(II)–triazole coordination complexes are formed in the CuAAC products. To address this problem, we demonstrate a novel interfacial liquid phase-driven method for the removal of Cu ions. We synthesized small molecules, linear polymers, and hyperbranched polymers by using CuAAC. To remove Cu ions in these products, Cu ions were precipitated using Na2S in a solvent mixture that contains water, dimethylformamide, and dichloromethane (DCM). The products and the CuS precipitates were automatically dispersed in the DCM phase and aqueous phase, respectively, resulting in separation of the products and CuS. Compared to the conventional Cu removal methods, our new method is highly efficient, fast, and generally applicable to small molecules and polymers. More than 98% Cu in the CuAAC products can be removed by using our method. Moreover, we tested the biocompatibility of hyperbranched polymers synthesized using CuAAC and purified using our method. These polymers are compatible to cells, indicating our Cu removal method shows promise in purification of biomaterials synthesized using CuAAC.

Notes

Acknowledgements

The work is supported by the financial support from the National Natural Science Foundation of China (21374089/21703172), the Innovation Foundation for Doctor Dissertation of NPU (CX201706), State Key Laboratory of Solidification Processing in NWPU (SKLSP201629), Shaanxi Natural Science Foundation of Shaanxi Province (2016JQ2013), and Fundamental Research Funds for the Central Universities.

Compliance with ethical standards

Conflict of interest

Authors declare that they have no conflict of interest.

Supplementary material

10853_2018_2292_MOESM1_ESM.doc (26 mb)
Supplementary material 1 (DOC 26624 kb)

References

  1. 1.
    Shi Y, Graff RW, Cao XS, Wang XF, Gao HF (2015) Chain-growth click polymerization of AB2 monomers for the formation of hyperbranched polymers with low polydispersities in a one-pot process. Angew Chem Int Ed 54:7631–7635CrossRefGoogle Scholar
  2. 2.
    Qin AJ, Lam JW, Jim CK, Zhang L, Yan JJ, Häussler M, Liu JZ, Dong YQ, Liang DH, Chen EQ, Jia GC, Tang BZ (2008) Hyperbranched polytriazoles: click polymerization, regioisomeric structure, light emission, and fluorescent patterning. Macromolecules 41:3808–3822CrossRefGoogle Scholar
  3. 3.
    Ban QF, Chen H, Yan Y, Tian N, Kong J (2010) Tunable intramolecular cyclization and glass transition temperature of hyperbranched polymers by regulating monomer reactivity. Eur Polym J 96:474–483CrossRefGoogle Scholar
  4. 4.
    van Steenis DJVC, David ORP, van Strijdonck GPF, van Maarseveen JH, Reek JNH (2005) Click-chemistry as an efficient synthetic tool for the preparation of novel conjugated polymers. Chem Commun 34:4333–4335CrossRefGoogle Scholar
  5. 5.
    Chen H, Kong J (2016) Hyperbranched polymers from A2 + B3 strategy: recent advances in description and control of fine topology. Polym Chem 7:3643–3663CrossRefGoogle Scholar
  6. 6.
    Ban QF, Kong J (2016) Intramolecular cyclization of long-chain hyperbranched polymers (HyperMacs) from A2 + Bn step-wise polymerization. Polym Chem 7:4717–4727CrossRefGoogle Scholar
  7. 7.
    Li M, De P, Gondi SR, Sumerlin BS (2008) Responsive polymer-protein bioconjugates prepared by RAFT polymerization and copper-catalyzed azide–alkyne click chemistry. Macromol Rapid Commun 29:1172–1176CrossRefGoogle Scholar
  8. 8.
    Pansare VJ, Hejazi S, Faenza WJ, Prud’homme RK (2012) Review of long-wavelength optical and NIR imaging materials: contrast agents, fluorophores, and multifunctional nano carriers. Chem Mater 24:812–827CrossRefGoogle Scholar
  9. 9.
    Jiang YJ, Chen J, Deng C, Suuronen EJ, Zhong ZY (2014) Click hydrogels, microgels and nanogels: emerging platforms for drug delivery and tissue engineering. Biomaterials 35:4969–4985CrossRefGoogle Scholar
  10. 10.
    Ashton TD, Jolliffe KA, Pfeffer FM (2015) Luminescent probes for the bioimaging of small anionic species in vitro and in vivo. Chem Soc Rev 44:4547–4595CrossRefGoogle Scholar
  11. 11.
    Lallana E, Riguera R, Fernandez-Megia E (2011) Reliable and efficient procedures for the conjugation of biomolecules through huisgen azide–alkyne cycloadditions. Angew Chem Int Ed 50:8794–8804CrossRefGoogle Scholar
  12. 12.
    Bai T, Du JJ, Chen JX, Duan X, Chen H, Kong J (2017) Reduction-responsive dithiomaleimide-based polymeric micelles for controlled anti-cancer drug delivery and bioimaging. Polym Chem 8:7160–7168CrossRefGoogle Scholar
  13. 13.
    Rostovtsev VV, Green LG, Fokin VV, Sharpless KB (2002) A stepwise huisgen cycloaddition process: copper (I)-catalyzed regioselective “ligation” of azides and terminal alkynes. Angew Chem 114:2708–2711CrossRefGoogle Scholar
  14. 14.
    Worrell BT, Malik JA, Fokin VV (2013) Direct evidence of a dinuclear copper intermediate in Cu (I)-catalyzed azide–alkyne cycloadditions. Science 340:457–460CrossRefGoogle Scholar
  15. 15.
    Averick A, Dolai S, Punia A, Punia K, Guariglia SR, L’Amoreaux W, Hong KL, Raja K (2016) Green anchors: chelating properties of ATRP-click curcumin-polymer conjugates. React Funct Polym 102:47–52CrossRefGoogle Scholar
  16. 16.
    Kaplan JH, Maryon EB (2016) How mammalian cells acquire copper: an essential but potentially toxic metal. Biophys J 110:7–13CrossRefGoogle Scholar
  17. 17.
    Tunçsoy M, Duran S, Ay Ö, Cicik B, Erdem C (2016) Accumulation of copper in gill, liver, spleen, kidney and muscle tissues of clarias gariepinus exposed to the metal singly and in mixture with chitosan. Bull Environ Contam Toxicol 97:1–4CrossRefGoogle Scholar
  18. 18.
    Jewett C, Bertozzi CR (2010) Cu-free click cycloaddition reactions in chemical biology. Chem Soc Rev 39:1272–1279CrossRefGoogle Scholar
  19. 19.
    Qin AJ, Liu Y, Tang BZ (2015) Regioselective metal-free click polymerization of azides and alkynes. Macromol Chem Phys 216:818–828CrossRefGoogle Scholar
  20. 20.
    Agard NJ, Prescher JA, Bertozzi CR (2004) A strain-promoted [3 + 2] azide–alkyne cycloaddition for covalent modification of biomolecules in living systems. J Am Chem Soc 126:15046–15047CrossRefGoogle Scholar
  21. 21.
    Agard NJ, Baskin JM, Prescher JA, Lo A, Bertozzi CR (2006) A comparative study of bioorthogonal reactions with azides. ACS Chem Biol 1:644–648CrossRefGoogle Scholar
  22. 22.
    Liu Y, Wang J, Huang D, Zhang J, Guo S, Hu RR, Zhao ZJ, Qin AJ, Tang BZ (2015) Synthesis of 1,5-regioregular polytriazoles by efficient NMe4OH-mediated azide–alkyne click polymerization. Polym Chem 6:545–5549Google Scholar
  23. 23.
    Matyjaszewski K, Pintauer T, Gaynor S (2000) Removal of copper-based catalyst in atom transfer radical polymerization using ion exchange resins. Macromolecules 33:476–1478Google Scholar
  24. 24.
    Li Y, Niehaus JC, Chen Y, Fuchs H, Studer A, Galla HJ, Chi L (2011) Patterning of proteins into nanostripes on Si-wafer over large areas: a combination of Langmuir–Blodgett patterning and orthogonal surface chemistry. Soft Matter 7:861–863CrossRefGoogle Scholar
  25. 25.
    Ebbesen MF, Itskalov D, Baier M, Hartmann L (2017) Cu elimination from Cu-coordinating macromolecules. ACS Macro Lett 6:399–403CrossRefGoogle Scholar
  26. 26.
    Chan TR, Hilgraf R, Sharpless KB, Fokin VV (2004) Polytriazoles as copper (I)-stabilizing ligands in catalysis. Org Lett 6:2853–2855CrossRefGoogle Scholar
  27. 27.
    Liu RP, Zhang B, Wan LQ, Huang FR, Du L (2016) Kinetic studies of CuBr–PMDETA catalyzed 1,3-dipolar cycloaddition polymerization. J Macromol Sci A 53:368–373CrossRefGoogle Scholar
  28. 28.
    Zhao Y, Truhlar DG (2008) The M06 suite of density functionals for main group thermochemistry, thermochemical kinetics, noncovalent interactions, excited states, and transition elements: two new functionals and systematic testing of four M06-class functionals and 12 other functionals. Theor Chem Acc 120:215–241CrossRefGoogle Scholar
  29. 29.
    Zhao Y, Truhlar DG (2006) Comparative DFT study of van der Waals complexes: rare-gas dimers, alkaline-earth dimers, zinc dimer, and zinc-rare-gas dimers. J Phys Chem 110:5121–5129CrossRefGoogle Scholar
  30. 30.
    Stevens WJ, Krauss M, Basch H, Jasien PG (1992) Relativistic compact effective potentials and efficient, shared-exponent basis sets for the third-, fourth-, and fifth-row atoms. Can J Chem 70:612–630CrossRefGoogle Scholar
  31. 31.
    Cundari TR, Stevens WJ (1995) Effective core potential studies of lanthanide complexes. J Chem Phys 103:7058–7063CrossRefGoogle Scholar
  32. 32.
    Tomasi J, Mennucci B, Cammi R (2005) Quantum mechanical continuum solvation models. Chem Rev 105:2999–3094CrossRefGoogle Scholar
  33. 33.
    Baranek A, Song HB, McBride M, Finnegan P, Bowman CN (2016) Thermomechanical formation–structure–property relationships in photopolymerized copper-catalyzed azide–alkyne (CuAAC) networks. Macromolecules 49:1191–1200CrossRefGoogle Scholar
  34. 34.
    Hosokawa KMH, Yanagida S (1999) Controlling microscopic surface structure, crystalline size and crystallinity of CdS and ZnS nanocrystallites. Jap J Appl Phys 38:522–527CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.School of ScienceNorthwestern Polytechnical UniversityXi’anPeople’s Republic of China
  2. 2.Max Planck Institute for Polymer ResearchMainzGermany

Personalised recommendations