Dynamic constitutive behavior of Hastelloy X under thermo-mechanical loads
- 638 Downloads
An experimental investigation has been conducted to study the dynamic constitutive behavior of Hastelloy X (AMS 5754) at room and elevated temperatures under varying rates of loading. A split Hopkinson pressure bar (SHPB) apparatus was used in conjunction with an induction coil heating system for applying dynamic loads at elevated temperatures. Experiments were carried out at different temperatures ranging from room temperature (25 °C) to 1,100 °C at an average strain rate of 5000/s. Room temperature experiments were carried out at varying strain rates from 1000 to 4000/s. The results show that as the strain rate increases from quasi-static to 4000/s, the yield strength increases by approximately 50%. Also, under dynamic loading, the yield stress decreases with temperature up to 700 °C, after which it shows a peak at 900 °C before beginning to decrease again as the temperature is further increased. The Johnson–Cook model was used to predict the dynamic plastic response under varying rates of loading and at different temperatures.
KeywordsFlow Stress Molybdenum Disulfide Average Relative Error Reference Strain Rate Vary Strain Rate
The first two authors kindly acknowledge the financial support provided by the Air Force Office of Scientific Research under Grant No. FA9550-09-1-0639. Also the authors would like to thank professor John Lambros for his valuable discussions.
- 3.An unknown copy (1998) Mil-Handbook-5HGoogle Scholar
- 4.Swindeman RW, Brinkman CR (1981) In: Technical report, ASME PVP conference, Denver, COGoogle Scholar
- 5.Aghaie-Khafri M, Golarzi N (2007) Mater Sci Eng A 486:641Google Scholar
- 12.Johnson GR, Cook WH (1983) In: Proceedings of seventh international symposium on ballistics, The Hague, The Netherlands, pp 541–547Google Scholar
- 13.Hou QY, Wang JT (2010) Comput Mater Sci. doi: 10.1016/j.commatsci.2010.07.018
- 15.Sajjadi SA, Zebarjad SM (2006) J Achiev Mater Manuf Eng 18:227Google Scholar
- 16.Sajjadi SA, Zebarjad SM (2006) J Achiev Mater Manuf Eng 28:34Google Scholar
- 19.Matthews SJ, Greentown, Klein HJ, Hodge FG (1978) US Patent 4129464Google Scholar
- 20.Petronic S, Milosavljevic A (2007) FME Trans 35:189Google Scholar
- 21.Claudson TT, Westerman RE (1965) An evaluation of the corrosion resistance of several high temperature alloys for nuclear applications. Metallurgy Research Section, Reactor and Materials Technology Department. AEC Research and Development Report, Atomic Energy CommissionGoogle Scholar