Advertisement

Journal of Materials Science

, Volume 44, Issue 19, pp 5161–5166 | Cite as

Preparation of barium titanate nanocube particles by solvothermal method and their characterization

  • Satoshi Wada
  • A. Nozawa
  • M. Ohno
  • H. Kakemoto
  • T. Tsurumi
  • Y. Kameshima
  • Y. Ohba
Ferroelectrics

Abstract

Barium titanate (BaTiO3) nanocube particles below 20 nm were prepared by solvothermal method. A selection of organic solvent and inorganic materials of Ba and Ti sources was most important for the preparation of nanocubes. A nucleation and particle growth of BaTiO3 nanoparticles led to a formation of the BaTiO3 nanocubes with a size of 10–15 nm at temperatures above 200 °C.

Keywords

BaTiO3 Barium Titanate Strontium Titanate Transmission Electron Microscope Photograph Calcium Titanate 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Notes

Acknowledgements

We would like to thank Mr. K. Kobayashi, Mr. K. Saito, Dr. T. Suzuki, and Dr. H. Chazono of Taiyo Yuden Co., Ltd, for helpful discussion about TEM observation and Mr. T. Maruyama of Toppan Forms Co., Ltd, for helpful discussion about FE-SEM observation.

References

  1. 1.
    Castro T, Reifenberger R, Choi E, Andres RP (1990) Phys Rev B 42:8548CrossRefADSGoogle Scholar
  2. 2.
    Yamashita Y, Yamamoto H, Sakabe Y (2004) Jpn J Appl Phys 43(9B):6521CrossRefADSGoogle Scholar
  3. 3.
    Wada S, Nishiyama M, Hoshina T, Kakemoto H, Tsurumi T (2007) Key Eng Mater 350:39CrossRefGoogle Scholar
  4. 4.
    Akedo J, Lebedev M (1999) Jpn J Appl Phys 38(9B):5397CrossRefADSGoogle Scholar
  5. 5.
    Iwaji N, Tanaka R, Kuwabara M (2007) Jpn J Appl Phys 46(17):L402CrossRefADSGoogle Scholar
  6. 6.
    Hou B, Li Z-J, Xu Y, Wu D, Sun Y (2005) Chem Lett 34(7):1040CrossRefGoogle Scholar
  7. 7.
    Yan T, Shen Z-G, Chen J-F, Liu X-L, Tao X, Yun J (2005) Chem Lett 34(8):1196CrossRefGoogle Scholar
  8. 8.
    Fukui K, Hidaka K, Aoki M, Abe K (1990) Ceram Int 16:285CrossRefGoogle Scholar
  9. 9.
    Hennings D, Rosenstein G, Schreinemacher H (1991) J Eur Ceram Soc 8(2):107CrossRefGoogle Scholar
  10. 10.
    Wada S, Suzuki T, Noma T (1995) Jpn J Appl Phys 34(9B):5368CrossRefADSGoogle Scholar
  11. 11.
    Wada S, Suzuki T, Noma T (1995) J Ceram Soc Jpn 103(12):1220Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2009

Authors and Affiliations

  • Satoshi Wada
    • 1
  • A. Nozawa
    • 1
  • M. Ohno
    • 2
  • H. Kakemoto
    • 2
  • T. Tsurumi
    • 2
  • Y. Kameshima
    • 2
  • Y. Ohba
    • 2
  1. 1.Material Science and Technology, Interdisciplinary Graduate School of Medical and EngineeringUniversity of YamanashiKofuJapan
  2. 2.Department of Metallurgy and Ceramics Science, Graduate School of Science and EngineeringTokyo Institute of TechnologyTokyoJapan

Personalised recommendations